Surface area or diameter – which factor really determines the antibacterial activity of silver nanoparticles grown on TiO₂ coatings?

Titanium dioxide coatings were prepared on Si wafers using the sol–gel method. Four different types of coatings with silver nanoparticles (AgNPs) were synthesized. The diameter and surface density of AgNPs were conditioned by the concentration of Ag+ ions in the initial solution, time and UV illumination source. The bactericidal activity of AgNPs on the titanium dioxide coatings against the S. aureus strain were calculated as the percentage of the inhibition of bacterial growth after 24 hour incubation of microorganisms at 37°C on TiO₂ coatings with AgNPs. Control samples were coated with titanium dioxide without AgNPs. We concluded that the titanium dioxide coatings modified with silver nanoparticles had a high antibacterial activity. Moreover, we demonstrated strong dependence between surface areas of AgNPs and inhibition of bacterial growth. The obtained results evidence that the surface area of AgNPs grown on titanium dioxide coatings is a major factor determining their antimicrobial potential

Temporal and between-site variation in helminth communities of bank voles (Myodes glareolus) from N.E. Poland: 2. The infracommunity level

The relative importance of temporal and spatial effects was assessed in helminth communities of bank voles (Myodes glareolus) in 3 woodland sites in N.E. Poland in the late summers of 1999 and 2002. Among common species the rank order of sites in relation to prevalence and abundance of infection was maintained between surveys. Site effects accounted for most of the deviance (in statistical models), and time was less important, so the exact location from which voles were sampled was of critical importance. The only exception was Syphacia petrusewiczi. In contrast, for derived measures such as species richness and diversity, most deviance was accounted for by host age, and the interaction between site and year was significant, implying that rank order of sites changed between years. Temporal effects on derived measures were generated primarily by a combination of relatively small changes in prevalence and abundance of the common, rather than the rare, species between the years of the study. In the medium-term, therefore, helminth communities of bank voles in N.E. Poland had a stable core, suggesting a substantial strong element of predictability

Three-dimensional image reconstruction in J-PET using Filtered Back Projection method

We present a method and preliminary results of the image reconstruction in the Jagiellonian PET tomograph. Using GATE (Geant4 Application for Tomographic Emission), interactions of the 511 keV photons with a cylindrical detector were generated. Pairs of such photons, flying back-to-back, originate from e+e- annihilations inside a 1-mm spherical source. Spatial and temporal coordinates of hits were smeared using experimental resolutions of the detector. We incorporated the algorithm of the 3D Filtered Back Projection, implemented in the STIR and TomoPy software packages, which differ in approximation methods. Consistent results for the Point Spread Functions of ~5/7,mm and ~9/20, mm were obtained, using STIR, for transverse and longitudinal directions, respectively, with no time of flight information included.Comment: Presented at the 2nd Jagiellonian Symposium on Fundamental and Applied Subatomic Physics, Krak\'ow, Poland, June 4-9, 2017. To be published in Acta Phys. Pol.

Dialkyldithiophosphate Acids (HDDPs) as Effective Lubricants of Sol–Gel Titania Coatings in Technical Dry Friction Conditions

The goal of this study was the investigation of the effectiveness of dialkyldithiophosphate acids (HDDPs) films in improving the tribological properties of thin, sol– gel derived titania coatings. Amorphous, anatase, and rutile titania coatings were obtained using sol–gel dip–coating deposition after treatment at 100, 500, and 1,000 C, respectively. Titania coatings were then modified from the liquid phase by HDDPs acids having dodecyl-(C12), tetradecyl-(C14), and hexadecyl-(C16) alkyl chains deposited by dip–coating (DC) and Langmuir–Blodgett (LB) methods. The influence of the deposition procedure, the length of the HDDPs alkyl chain and the type of titania substrate on the surface morphology and tribological properties were studied. It was found, using wetting contact angle measurements, that these modifications of titania coatings decrease the surface free energy and increase its hydrophobicity. The surface topography imaged by Atomic force microscopy (AFM), exhibit island-like or agglomerate features for the DC deposition method, while smooth topographies were observed for LB depositions. Tribological tests were conducted by means of a microtribometer operating in the normal load range 30–100 mN. An enhancement of tribological properties was observed upon modification, as compared to unmodified titania

Temporal and between-site variation in helminth communities of bank voles (Myodes glareolus) from N.E. Poland. 1. Regional fauna and component community levels

Helminth infections were studied in bank voles (Myodes glareolus) from 3 woodland sites in N.E. Poland in the late summers of 1999 and 2002, to assess the temporal stability of derived statistics describing the regional helminth fauna and component community structure, and spatial influence on the latter. Regional helminth fauna changed dramatically between the two years, primarily due to a fall in the abundance of Syphacia petrusewiczi but was partially compensated for by an increase in Mesocestoides lineatus and Cladotaenia globifera. It was dominated by nematodes overall, but more so in 1999 than in 2002 when larval cestodes were more frequent. Most derived parameters for component community structure varied considerably between sites and the two surveys, the hierarchical order for sites not being maintained between surveys. They were susceptible to the disproportionate influence of three relatively rare, unpredictable species with the greatest overall aggregated distribution among hosts. Jaccard’s similarity index was less influenced by the rare species, showing greater stability between sites and across years. In conclusion, temporal variation confounded any site-specific characteristics of the summary measures quantified in this study and their usefulness is therefore restricted to the years in which the surveys were conducted

Measurement of the Luminosity in the ZEUS Experiment at HERA II

The luminosity in the ZEUS detector was measured using photons from electron bremsstrahlung. In 2001 the HERA collider was upgraded for operation at higher luminosity. At the same time the luminosity-measuring system of the ZEUS experiment was modified to tackle the expected higher photon rate and synchrotron radiation. The existing lead-scintillator calorimeter was equipped with radiation hard scintillator tiles and shielded against synchrotron radiation. In addition, a magnetic spectrometer was installed to measure the luminosity independently using photons converted in the beam-pipe exit window. The redundancy provided a reliable and robust luminosity determination with a systematic uncertainty of 1.7%. The experimental setup, the techniques used for luminosity determination and the estimate of the systematic uncertainty are reported.Comment: 25 pages, 11 figure

Evaluation of Single-Chip, Real-Time Tomographic Data Processing on FPGA - SoC Devices

A novel approach to tomographic data processing has been developed and evaluated using the Jagiellonian PET (J-PET) scanner as an example. We propose a system in which there is no need for powerful, local to the scanner processing facility, capable to reconstruct images on the fly. Instead we introduce a Field Programmable Gate Array (FPGA) System-on-Chip (SoC) platform connected directly to data streams coming from the scanner, which can perform event building, filtering, coincidence search and Region-Of-Response (ROR) reconstruction by the programmable logic and visualization by the integrated processors. The platform significantly reduces data volume converting raw data to a list-mode representation, while generating visualization on the fly.Comment: IEEE Transactions on Medical Imaging, 17 May 201