The view from elsewhere: perspectives on ALife Modeling

Many artificial life researchers stress the interdisciplinary character of the field. Against such a backdrop, this report reviews and discusses artificial life, as it is depicted in, and as it interfaces with, adjacent disciplines (in particular, philosophy, biology, and linguistics), and in the light of a specific historical example of interdisciplinary research (namely cybernetics) with which artificial life shares many features. This report grew out of a workshop held at the Sixth European Conference on Artificial Life in Prague and features individual contributions from the workshop's eight speakers, plus a section designed to reflect the debates that took place during the workshop's discussion sessions. The major theme that emerged during these sessions was the identity and status of artificial life as a scientific endeavor

Electrical impedance spectroscopy enabled in-depth lubrication condition monitoring

Electrical contact resistance or capacitance as measured between two interfaces of a lubricated contact has been used in tribometers, partially reflecting the lubrication condition. In contrast, the electrical impedance spectroscopy (EIS) provides rich information of magnitude/phase spectrum, which is thoroughly investigated using a combination of electrical circuit models (equivalent to the lubricated contact) and in-situ measurements with a ball-on-disc contact. Results indicate a promising potential of EIS in lubrication condition monitoring, including the variation of lubricant film thickness as estimated using high-frequency magnitude response; the transition between full-film, mixed, and boundary lubrication regimes, as differentiated using extracted electrical resistance together with phase spectrum; the forming of anti-wear boundary film, where extra resistor/capacitor are added; and the degradation of lubricant, such as fuel dilution, oil oxidization, and water emulsifying

Bodyspace at the pub: sexual orientations and organizational space

In this article we argue that sexuality is not only an undercurrent of service environments, but is integral to the way that these workspaces are experienced and negotiated. Through drawing on Sara Ahmed’s (2006a) ‘orientation’ thesis, we develop a concept of ‘bodyspace’ to suggest that individuals understand, shape and make meaning of work spaces through complex sexually-orientated negotiations. Presenting analysis from a study of UK pubs, we explore bodyspace in the lived experience of workplace sexuality through three elements of orientation: background; bodily dwelling; and lines of directionality. Our findings show how organizational spaces afford or mitigate possibilities for particular bodies, which simultaneously shape expectations and experiences of sexuality at work. Bodyspace therefore provides one way of exposing the connection between sexual ‘orientation’ and the lived experience of service sector work

Using e-mail recruitment and an online questionnaire to establish effect size: A worked example

Background\ud Sample size calculations require effect size estimations. Sometimes, effect size estimations and standard deviation may not be readily available, particularly if efficacy is unknown because the intervention is new or developing, or the trial targets a new population. In such cases, one way to estimate the effect size is to gather expert opinion. This paper reports the use of a simple strategy to gather expert opinion to estimate a suitable effect size to use in a sample size calculation.\ud \ud Methods\ud Researchers involved in the design and analysis of clinical trials were identified at the University of Birmingham and via the MRC Hubs for Trials Methodology Research. An email invited them to participate.\ud \ud An online questionnaire was developed using the free online tool 'Survey Monkey©'. The questionnaire described an intervention, an electronic participant information sheet (e-PIS), which may increase recruitment rates to a trial. Respondents were asked how much they would need to see recruitment rates increased by, based on 90%. 70%, 50% and 30% baseline rates, (in a hypothetical study) before they would consider using an e-PIS in their research.\ud \ud Analyses comprised simple descriptive statistics.\ud \ud Results\ud The invitation to participate was sent to 122 people; 7 responded to say they were not involved in trial design and could not complete the questionnaire, 64 attempted it, 26 failed to complete it. Thirty-eight people completed the questionnaire and were included in the analysis (response rate 33%; 38/115). Of those who completed the questionnaire 44.7% (17/38) were at the academic grade of research fellow 26.3% (10/38) senior research fellow, and 28.9% (11/38) professor. Dependent upon the baseline recruitment rates presented in the questionnaire, participants wanted recruitment rate to increase from 6.9% to 28.9% before they would consider using the intervention.\ud \ud Conclusions\ud This paper has shown that in situations where effect size estimations cannot be collected from previous research, opinions from researchers and trialists can be quickly and easily collected by conducting a simple study using email recruitment and an online questionnaire. The results collected from the survey were successfully used in sample size calculations for a PhD research study protocol.\ud \u

Modelling impacts of agricultural practice on flood peaks in upland catchments: An application of the distributed TOPMODEL

Upland agricultural land management activities such as grazing, vegetation burning, and bare ground restoration impact hydrological elements of headwater catchments, many of which may be important for downstream flood peaks (e.g., overland flow and soil water storage). However, there is poor understanding of how these management practices affect river flow peaks during high magnitude rainfall events. Using the distributed TOPMODEL, spatial configurations of land management were modelled to predict flood response in an upland catchment, which contains different regions operating subsidized agricultural stewardship schemes. Heavy grazing leading to soil compaction and loss of vegetation cover in stewardship regions covering 79.8% of the catchment gave a 42‐min earlier flow peak, which was 82.2% higher (under a 1‐hr 15‐mm storm) than the current simulated hydrograph. Light grazing over the same regions of the catchment had much less influence on river flow peaks (18 min earlier and 32.9% increase). Rotational burning (covering 8.8% of the catchment), most of which is located in the headwater areas, increased the peak by 3.2% in the same rainfall event. Vegetation restoration with either Eriophorum or Sphagnum (higher density) in bare areas (5.8%) of the catchment provided a reduction of flood peak (3.9% and 5.2% in the 15‐mm storm event), whereas the same total area revegetated with Sphagnum in riparian regions delivered a much larger decrease (15.0%) in river flow peaks. We show that changes of vegetation cover in highly sensitive areas (e.g., near‐stream zones) generate large impacts on flood peaks. Thus, it is possible to design spatially distributed management systems for upland catchments, which reduce flood peaks while at the same time ensuring economic viability for upland farmers

Experimental study on the influence of dimethylamine on the detection of gas phase sulfuric acid using chemical ionization mass spectrometry (CIMS)

Based on quantum chemistry calculations it has been suggested that the quantitative detection of gas phase sulfuric acid (H_2SO_4) by use of Chemical Ionization Mass Spectrometry (CIMS) could be biased in the presence of gas phase amines such as dimethylamine (DMA). An experiment was set up at the CLOUD aerosol chamber to test the quantitative detection of H_2SO_4 by CIMS by directly comparing the measured H_2SO_4 with and without DMA being present in the sample air. It was found that the H_2SO_4 cluster distribution changes but the CIMS detection efficiency is not strongly influenced

Measurement of the Fermi Constant by FAST

An initial measurement of the lifetime of the positive muon to a precision of 16 parts per million (ppm) has been performed with the FAST detector at the Paul Scherrer Institute. The result is tau_mu = 2.197083 (32) (15) microsec, where the first error is statistical and the second is systematic. The muon lifetime determines the Fermi constant, G_F = 1.166353 (9) x 10^-5 GeV^-2 (8 ppm).Comment: 15 pages, 6 figure

Interpreting short and medium exposure etched-track radon measurements to determine whether an action level could be exceeded

Radon gas is naturally occurring, and can concentrate in the built environment. It is radioactive and high concentration levels within buildings, including homes, have been shown to increase the risk of lung cancer in the occupants. As a result, several methods have been developed to measure radon. The long-term average radon level determines the risk to occupants, but there is always pressure to complete measurements more quickly, particularly when buying and selling the home. For many years, the three-month exposure using etched-track detectors has been the de facto standard, but a decade ago, Phillips et al. (2003), in a DEFRA funded project, evaluated the use of 1-week and 1-month measurements. They found that the measurement methods were accurate, but the challenge lay in the wide variation in radon levels - with diurnal, seasonal, and other patterns due to climatic factors and room use. In the report on this work, and in subsequent papers, the group proposed methodologies for 1-week, 1-month and 3-month measurements and their interpretation. Other work, however, has suggested that 2-week exposures were preferable to 1-week ones. In practice, the radon remediation industry uses a range of exposure times, and further guidance is required to help interpret these results. This paper reviews the data from this study and a subsequent 4-year study of 4 houses, re-analysing the results and extending them to other exposures, particularly for 2-week and 2-month exposures, and provides comprehensive guidance for the use of etched-track detectors, the value and use of Seasonal Correction Factors (SCFs), the uncertainties in short and medium term exposures and the interpretation of results

Non-linearity and spatial resolution in a cellular automaton model of a small upland basin

International audienceThe continuing development of computational fluid dynamics is allowing the high resolution study of hydraulic and sediment transport processes but, due to computational complexities, these are rarely applied to areas larger than a reach. Existing approaches, based upon linked cross sections, can give a quasi two-dimensional view, effectively simulating sediment transport for a single river reach. However, a basin represents a whole discrete dynamic system within which channel, floodplain and slope processes operate over a wide range of space and time scales. Here, a cellular automaton (CA) approach has been used to overcome some of these difficulties, in which the landscape is represented as a series of fixed size cells. For every model iteration, each cell acts only in relation to the influence of its immediate neighbours in accordance with appropriate rules. The model presented here takes approximations of existing flow and sediment transport equations, and integrates them, together with slope and floodplain approximations, within a cellular automaton framework. This method has been applied to the basin of Cam Gill Beck (4.2 km2 ) above Starbotton, upper Wharfedale, a tributary of the River Wharfe, North Yorkshire, UK. This approach provides, for the first time, a workable model of the whole basin at a 1 m resolution. Preliminary results show the evolution of bars, braids, terraces and alluvial fans which are similar to those observed in the field, and examples of large and small scale non-linear behaviour which may have considerable implications for future models