The development and application of time resolved PIV at the University of Strathclyde

This paper describes the development of time resolved particle image velocimetry (PIV) within the Department of Mechanical Engineering at the University of Strathclyde. The Department's first PIV systems were developed on a limited budget and used existing and second hand equipment. The original technique which, employed 16mm high speed cinematography, is described. The introduction and development of low cost systems employing high speed digital video (HSDV) is discussed and, finally, the Department's new time resolved PIV system, supplied by Dantec Dynamics, is introduced. For each of the PIV systems that have been developed a critical analysis of their functionality is given and samples of the data that they have been produced are shown. Data are presented from systems such as de-rotated centrifugal impellers, air bubbles growing in columns of water, pulsatile jets and vortex shedding

Convective heat transfer characteristics of flow through open-cell metal foam considering real structural geometry

This study demonstrates numerical prediction of temperature and velocity field when fluid flows through the real 40 PPI metal foam structure extracted by the 3-D μ-CT method. The results are compared to those obtained using structured model and experimental data. The effects of the hollowness of a metal foam ligament on the heat transfer characteristics are presented, and an empirical correlation is suggested for estimating the corresponding Nusselt number. The numerical results clearly show that the hollowness directly affects the heat transfer characteristics, and the Nusselt number for hollowness of 0.79 was about 40% lower than that for a solid ligament. An extended correlation was derived through thermodynamic analysis and numerical results. The experimental data verified that the proposed correlation is appropriate for estimating the Nusselt number for open-cell metal foam with hollow ligaments.Papers presented to the 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Costa de Sol, Spain on 11-13 July 2016

Implementation Problems in the Development of Urban Community Services in the People\u27s Republic of China: The Case of Beijing

To review the ten year implementation of the community service policy of the People\u27s Republic of China, community service implementers and academics located in Beijing were interviewed. By employing implementation theories as a framework of analysis, a number of implementation problems are identified. In terms of policy characteristics and the structuring of implementation, this case shows that the objectives are not specific enough. The decentralized implementation strategy allows the implementers too much discretionary power. The shortage of qualified and motivated personnel further complicate the issue. Lastly, the policy environment of Beijing does not lend adequate support to the policy

Change in fatty liver status and 5-year risk of incident metabolic syndrome: a retrospective cohort study

INTRODUCTION: Fatty liver is associated with metabolic syndrome (MetS) but it may also occur without MetS. Whether resolution of fatty liver in the general population affects risk of MetS is unknown. Our aim was to determine whether a change in fatty liver status (either the development of new fatty liver or the resolution of existing fatty liver) would modify the risk of de novo MetS.METHODS:Two thousand eighty-nine people without hypertension, diabetes, and MetS were examined at baseline and at 5-year follow-up using a retrospective cohort study design. Fatty liver status was assessed at baseline and at follow-up by ultrasonography. Adjusted hazard ratios (aHR) and 95 % confidence intervals (CIs) for de novo MetS at follow-up were calculated controlling for the potential confounders, compared to the reference group (people who never had fatty liver at baseline and follow-up).RESULTS:During follow-up, fatty liver developed in 251 people and fatty liver resolved in 112 people. After the adjustment for multiple confounders, persisting fatty liver and incident fatty liver development were associated with de novo MetS, with aHR of 2.60 (95 % CIs [1.61,4.20]) and 3.31 (95 % CIs [1.99,5.51]), respectively. Risk of new MetS in resolved fatty liver group was attenuated with insignificant aHR of 1.29 accompanying 95 % CIs of 0.60 and 2.80.DISCUSSION:Development or maintenance of fatty liver is positively associated with occurrence of new MetS. Resolution of fatty liver status has similar risk of de novo MetS with those who never had fatty liver. Therefore, cautious management is needed with those with fatty liver

Oxide formation at the surface of late 4d transition metals: Insights from first-principles atomistic thermodynamics

Using density-functional theory we assess the stability of bulk and surface oxides of the late 4d transition metals in a ``constrained equilibrium'' with a gas phase formed of O2 and CO. While the stability range of the most stable bulk oxide extends for ruthenium well into gas phase conditions representative of technological CO oxidation catalysis, this is progressively less so for the 4d metals to its right in the periodic system. Surface oxides could nevertheless still be stable under such conditions. These thermodynamic considerations are discussed in the light of recent experiments, emphasizing the role of (surface) oxides as the active phase of model catalysts formed from these metals.Comment: 7 pages including 3 figures, Related publications can be found at http://www.fhi-berlin.mpg.de/th/paper.htm

Initial Commissioning of a Water-to-Water GHP System in KIER

GHP(Geothermal Heat Pump) system has been extensively disseminated due to the recent increasing demand of the new and renewable energy in Korea. However, the system reliability issues have been key barriers to ensure system performance as initially designed. This paper introduces a systematic method to verify its actually operating performance of a water to water GHP system. The main idea is to compare the actual performance with the manufacture data and then to reduce the gap between the actual and the manufacture data. The key result of this study is the development of a simplified GHP performance verification technique using the ISO standard based manufacture data. The manufacture performance data includes the information of EWT(entering water temperature), LWT(leaving water temperature), capacity, flow rate, power and COP. This technique has been verified to a w to w GHP system designed and installed at KIER site. The verification study showed that actual performance was lower than Manufacture data. And then the refrigerant was recharged and the compressor and the expansion valve were replaced. As a result, we can easily identify the GHP system problems and heating and cooling COP has been increased 25.26%, 18.24%