A digitally driven manufacturing process for high resolution patterning of cell formations

This paper presents the engineering and validation of an enabling technology that facilitates new capabilities in in vitro cell models for high-throughput screening and tissue engineering applications. This is conducted through a computerized system that allows the design and deposition of high-fidelity microscale patterned coatings that selectively alter the chemical and topographical properties of cell culturing surfaces. Significantly, compared to alternative methods for microscale surface patterning, this is a digitally controlled and automated process thereby allowing scientists to rapidly create and explore an almost infinite range of cell culture patterns. This new capability is experimentally validated across six different cell lines demonstrating how the precise microscale deposition of these patterned coatings can influence spatiotemporal growth and movement of endothelial, fibroblast, neuronal and macrophage cells. To further demonstrate this platform, more complex patterns are then created and shown to guide the behavioral response of colorectal carcinoma cells

Solvent free hydroxylation of the methyl esters of Blighia unijugata seed oil in the presence of cetyltrimethylammonium permanganate

Extraction of oil from the seed of Blighia unijugata gave a yield of 50.82 ± 1.20% using hexane in a soxhlet extractor. The iodine and saponification values were 67.60 ± 0.80 g iodine/100 g and 239.20 ± 1.00 mg KOH/g respectively with C18:1 being the dominant fatty acid. Unsaturated methyl esters of Blighia unijugata which had been previously subjected to urea adduct complexation was used to synthesize methyl 9, 10-dihydroxyoctadecanoate via hydroxylation in the presence of cetyltrimethylammonium permanganate (CTAP). The reaction was monitored and confirmed using FTIR and GC-MS. This study has revealed that oxidation reaction of mono unsaturated bonds using CTAP could be achieved under solvent free condition

The cumulative effect of core lifestyle behaviours on the prevalence of hypertension and dyslipidemia

Background: Most cardiovascular disease (CVD) occurs in the presence of traditional risk factors, including hypertension and dyslipidemia, and these in turn are influenced by behavioural factors such as diet and lifestyle. Previous research has identified a group at low risk of CVD based on a cluster of inter-related factors: body mass index (BMI) < 25 Kg/m2, moderate exercise, alcohol intake, non-smoking and a favourable dietary pattern. The objective of this study was to determine whether these factors are associated with a reduced prevalence of hypertension and dyslipidemia in an Irish adult population. Methods: The study was a cross-sectional survey of 1018 men and women sampled from 17 general practices. Participants completed health, lifestyle and food frequency questionnaires and provided fasting blood samples for analysis of glucose and insulin. We defined a low risk group based on the following protective factors: BMI <25 kg/m2; waist-hip ratio (WHR) <0.85 for women and <0.90 for men; never smoking status; participants with medium to high levels of physical activity; light alcohol consumption (3.5–7 units of alcohol/week) and a "prudent" diet. Dietary patterns were assessed by cluster analysis. Results: We found strong significant inverse associations between the number of protective factors and systolic blood pressure, diastolic blood pressure and dyslipidemia. The prevalence odds ratio of hypertension in persons with 1, 2, 3, ≥ 4 protective factors relative to those with none, were 1.0, 0.76, 0.68 and 0.34 (trend p < 0.01). The prevalence odds ratio of dyslipidemia in persons with 1, 2, 3, ≥ 4 protective factors relative to those with none were 0.83, 0.98, 0.49 and 0.24 (trend p = 0.001). Conclusion: Our findings of a strong inverse association between low risk behaviours and two of the traditional risk factors for CVD highlight the importance of 'the causes of the causes' and the potential for behaviour modification in CVD prevention at a population level

Gender differences in the clinical management of patients with angina pectoris: a cross-sectional survey in primary care

Non peer reviewedPublisher PD

The Tangibility of Personalized 3D-Printed Feedback May Enhance Youths' Physical Activity Awareness, Goal Setting, and Motivation: Intervention Study

Background: In the United Kingdom, most youth fail to achieve the government guideline of 60 min of moderate to vigorous physical activity (MVPA) daily. Reasons that are frequently cited for the underachievement of this guideline include (1) a lack of awareness of personal physical activity levels (PALs) and (2) a lack of understanding of what activities and different intensities contribute to daily targets of physical activity (PA). Technological advances have enabled novel ways of representing PA data through personalized tangible three-dimensional (3D) models. Objective: The purpose of this study was to investigate the efficacy of 3D-printed models to enhance youth awareness and understanding of and motivation to engage in PA. Methods: A total of 39 primary school children (22 boys; mean age 7.9 [SD 0.3] years) and 58 secondary school adolescents (37 boys; mean age 13.8 [SD 0.3] years) participated in a 7-week fading intervention, whereby participants were given 3D-printed models of their previous week’s objectively assessed PALs at 4 time points. Following the receipt of their 3D model, each participant completed a short semistructured video interview (children, 4.5 [SD 1.2] min; adolescents, 2.2 [SD 0.6] min) to assess their PA awareness, understanding, and motivation. Data were transcribed verbatim and thematically analyzed to enable key emergent themes to be further explored and identified. Results: Analyses revealed that the 3D models enhanced the youths’ awareness of and ability to recall and self-evaluate their PA behaviors. By the end of the study, the youths, irrespective of age, were able to correctly identify and relate to the government’s PA guideline represented on the models, despite their inability to articulate the government's guideline through time and intensity. Following the fourth 3D model, 72% (71/97) of the youths used the models as a goal-setting strategy, further highlighting such models as a motivational tool to promote PA.Conclusions: The results suggest that 3D-printed models of PA enhanced the youths’ awareness of their PA levels and provided a motivational tool for goal setting, potentially offering a unique strategy for future PA promotion

Clinical characteristics and outcomes of patients with acute lung injury and ARDS

Background : Acute lung injury (ALI) and acute respiratory distress syndrome (ARDS) are critical illnesses associated with significant morbidity and mortality. Aims : This was designed to assess various etiologies of ALI/ARDS, to determine the correlation between the diagnostic criteria and need of mechanical ventilation, and to correlate biochemical factors with the outcome of patients. Settings and Design : An observational, prospective study was conducted in a medical intensive care unit (MICU) of a tertiary care hospital, for a period of 1 year. Materials and Methods : This study encompassed 58 consecutive cases of ALI/ARDS admitted to a MICU as per AECC guidelines. Patients excluded were with cardiac failure, chronic kidney diseases with fluid overload, and age below 12 years. Statistical Analysis : The data were analysed applying χ2 -test, multivariate logistic regression analysis of significance, using computer-based program SPSS. Results : There were more males (74%) than females, and presentation was more common in the younger age group, with a total mortality of 57%. Factors attributable for ALI/ARDS were malaria in 16 patients (27.6%), leptospirosis in 12 (20.7%), malaria with dengue in 3 (5.2%), undiagnosed fever in 16 (27.6%), pneumonia in 8 (13.8%), urinary tract infection in 2 (3.4%), and pancreatitis in 1 (1.7%) patient. Out of 41 patients with PaO 2 /FiO 2 200, 11 patients though initially managed on noninvasive ventilation (NIV) subsequently required invasive ventilation, and remaining six were successfully managed on NIV. Out of 41 patients requiring mechanical ventilation, 36 had LIS >2.5, whereas only 3 out of 17 patients with LIS <2.5 required mechanical ventilation. Conclusion : Malaria, leptospirosis, and undiagnosed fever were the main etiologies followed by pneumonia, urinary tract infections, and pancreatitis. Both the PaO 2 /FiO 2 ratio and lung injury score (LIS) at the time of admission were significant predictors of the outcome and of necessity of mechanical ventilation. PaO 2 /FiO 2 was a better predictor of duration of stay at the intensive care unit than the LIS. Sepsis, acidosis, hypotension, and multiorgan failure were individual predictors of mortality in patients with ALI/ARDS while age, sex, anemia, thrombocytopenia, renal failure, hepatic failure, and X-ray picture were not predictors of the outcome