A generalized finite element method for modeling arbitrary interfaces in large deformation problems

In this paper, a generalized–FEM technique is presented in modeling of arbitrary interfaces in large deformations. The method is used to model the internal interfaces and arbitrary geometries using a uniform non-conformal mesh. The technique is applied to capture independent deformations at both sides of separated element cut by the interface in a uniform regular mesh. In this approach, a uniform non-conformal mesh is decomposed into subelements that conform to the internal interfaces. The geometry of interface is used to produce various triangular, quadrilateral and pentagonal elements at the intersection of interface with regular FE mesh, in which the extra degrees-of-freedom are defined along the interface. The level set method is employed to describe the material geometry on the background mesh. The technique is used to extrude any arbitrary geometry from an initial background mesh and model under different external effects. The most feature of the technique is to introduce the conformal decomposition finite element method, in which the new conforming elements are produced in the uniform structured mesh by decomposing the uniform mesh into elements that is conformed to the material interfaces. Finally, several numerical examples are analyzed to demonstrate the efficiency of proposed technique in modeling arbitrary interfaces in large deformations

Quantitative evaluation of polymer gel dosimeters by broadband ultrasound attenuation

Ultrasound has been examined previously as an alternative readout method for irradiated polymer gel dosimeters, with authors reporting varying dose response to ultrasound transmission measurements. In this current work we extend previous work to measure the broadband ultrasound attenuation (BUA) response of irradiated PAGAT gel dosimeters, using a novel ultrasound computed tomography system

Research Paper: The antinociceptive effects of rosuvastatin in chronic constriction injury model of male rats

Introduction: According to studies, statins possess analgesics and anti-inflammatory properties. In the present study, we examined the antinociceptive, anti-inflammatory and antioxidative effects of rosuvastatin in an experimental model of Chronic Constriction Injury (CCI). Methods: Our study was conducted on four groups; sham, CCI (the control group), CCI+rosuvastatin (i.p. 5 mg/kg), and CCI+rosuvastatin (i.p. 10 mg/kg). We performed heat hyperalgesia, cold and mechanical allodynia tests on the 3rd, 7th, 14th, and 21st after inducing CCI. Blood samples were collected to measure the serum levels of Tumor Necrosis Factor (TNF)-α, and Interleukin (IL)-6. Rats' spinal cords were also examined to measure tissue concentration of Malondialdehyde (MDA), Superoxide Dismutase (SOD), and Glutathione Peroxidase (GPx) enzymes. Results: Our findings showed that CCI resulted in significant increase in heat hyperalgesia, cold and mechanical allodynia on the 7th, 14th and 21st day. Rosuvastatin use attenuated the CCI-induced hyperalgesia and allodynia. Rosuvastatin use also resulted in reduction of TNF-α, IL-6, and MDA levels. However, rosuvastatin therapy increased the concentration of SOD and GPx in the CCI+Ros (5 mg/kg) and the CCI+Ros (10 mg/kg) groups compared to the CCI group. Conclusion: Rosuvastatin attenuated the CCI-induced neuropathic pain and inflammation. Thus, antinociceptive effects of rosuvastatin might be channeled through inhibition of inflammatory biomarkers and antioxidant properties

The Antinociceptive Effects of Rosuvastatin in Chronic Constriction Injury Model of Male Rats

Introduction: According to studies, statins possess analgesics and anti-inflammatory properties. In the present study, we examined the antinociceptive, anti-inflammatory and antioxidative effects of rosuvastatin in an experimental model of Chronic Constriction Injury (CCI). Methods: Our study was conducted on four groups; sham, CCI (the control group), CCI+rosuvastatin (i.p. 5 mg/kg), and CCI+rosuvastatin (i.p. 10 mg/kg). We performed heat hyperalgesia, cold and mechanical allodynia tests on the 3rd, 7th, 14th, and 21st after inducing CCI. Blood samples were collected to measure the serum levels of Tumor Necrosis Factor (TNF)-α, and Interleukin (IL)-6. Rats' spinal cords were also examined to measure tissue concentration of Malondialdehyde (MDA), Superoxide Dismutase (SOD), and Glutathione Peroxidase (GPx) enzymes. Results: Our findings showed that CCI resulted in significant increase in heat hyperalgesia, cold and mechanical allodynia on the 7th, 14th and 21st day. Rosuvastatin use attenuated the CCI-induced hyperalgesia and allodynia. Rosuvastatin use also resulted in reduction of TNF-α, IL-6, and MDA levels. However, rosuvastatin therapy increased the concentration of SOD and GPx in the CCI+Ros (5 mg/kg) and the CCI+Ros (10 mg/kg) groups compared to the CCI group. Conclusion: Rosuvastatin attenuated the CCI-induced neuropathic pain and inflammation. Thus, antinociceptive effects of rosuvastatin might be channeled through inhibition of inflammatory biomarkers and antioxidant propertie

Preferential Paths of Air-water Two-phase Flow in Porous Structures with Special Consideration of Channel Thickness Effects.

Accurate understanding and predicting the flow paths of immiscible two-phase flow in rocky porous structures are of critical importance for the evaluation of oil or gas recovery and prediction of rock slides caused by gas-liquid flow. A 2D phase field model was established for compressible air-water two-phase flow in heterogenous porous structures. The dynamic characteristics of air-water two-phase interface and preferential paths in porous structures were simulated. The factors affecting the path selection of two-phase flow in porous structures were analyzed. Transparent physical models of complex porous structures were prepared using 3D printing technology. Tracer dye was used to visually observe the flow characteristics and path selection in air-water two-phase displacement experiments. The experimental observations agree with the numerical results used to validate the accuracy of phase field model. The effects of channel thickness on the air-water two-phase flow behavior and paths in porous structures were also analyzed. The results indicate that thick channels can induce secondary air flow paths due to the increase in flow resistance; consequently, the flow distribution is different from that in narrow channels. This study provides a new reference for quantitatively analyzing multi-phase flow and predicting the preferential paths of immiscible fluids in porous structures

Poboljšanje fizičko-mehaničkih svojstava karbamazepina prekristalizacijom pri različitim pH

The morphology of crystals has an appreciable impact on the physicochemical properties of drugs. Drug properties such as flowability, dissolution, hardness and bioavailability may be affected by crystallinity behaviors of drugs. The objective of this study was to achieve improved physicomechanical properties of carbamazepine powder through recrystallization from aqueous solutions at different pH values. For this purpose, carbamazapine was recrystallized from aqueous solutions at different pH values (1, 7, 11). The morphology of crystals was investigated using scanning electron microscopy; X-ray powder diffraction (XRPD) was used to identify polymorphism; thermodynamic properties were analyzed using differential scanning calorimetery (DSC). Dissolution was determined using USP dissolution apparatus. Mechanical behavior of recrystallized carbamazepine powders was investigated by making tablets under different compaction pressures and measuring their hardness. SEM studies showed that carbamazepine crystallization in different media affected the morphology and size of carbamazepine crystals. The shape of carbamazepine crystals changed from flaky or thin plate-like to needle-shaped. XRPD and DSC results ruled out any crystallinity changes occurring due to the temperature or pH of crystallization media. The crushing strength of tablets indicated that all the recrystallized carbamazepine samples had better compactibility than the original carbamazepine powder. In vitro dissolution studies of carbamazepine samples showed a higher dissolution rate of carbamazepine crystals obtained from media with pH 11 and 1. Carbamazepine particles recrystallized from aqueous solutions of different pH values (all media) appeared to have superior mechanical properties to those of the original carbamazepine sample.Morfologija kristala ima značajan utjecaj na fizičko-mehanička svojstva lijekova. Kristaliničnost može utjecati na tečnost, oslobađanje, tvrdoću i bioraspoloživost lijekova. Cilj ovog rada bio je poboljšati fizičko-mehanička svojstva praha karbamazepina prekristalizacijom iz vodenih otopina pri različitim pH vrijednostima (1, 7 i 11). Fizičko-mehanička svojstva prekristaliziranog karbamazepina određivana su na sljedeći način: morfologija kristala ispitivana je pretražnom elektronskom mikroskopijom, polimorfi su identificirani rendgenskom difrakcijom praha (XRPD), a termodinamička svojstva analizirana su diferencijalnom pretražnom kalorimetrijom (DSC). Topljivost je određena pomoću aparata prema USP. Mehanička svojstva prekristaliziranog karbamazepina ispitivana su tijekom tabletiranja pri različitim tlakovima i mjerenjem tvrdoće nastalih tableta. SEM ispitivanja pokazala su da kristalizacija karbamazepina iz različitih medija utječe na morfologiju i veličinu kristala. Oblik kristala mijenjao se od pahuljastog ili pločastog do igličastog. Rezultati dobiveni XRPD i DSC metodama isključili su promjene kristaliničnosti zbog temperature ili pH medija. Mjerenjem lomljivosti tableta utvrđeno je da su svi prekristalizirani uzorci karbamazepina bili kompaktniji od polaznog praškastog uzorka. Ispitivanja topljivosti in vitro pokazala su da su kristali dobiveni iz otopine s pH 11 i 1 topljiviji. Uzorci karbamazepina dobiveni prekristalizacijom iz vodenih otopina različite pH vrijednosti imali su bolja mehanička svojstva od originalnog uzorka karbamazepina

High-risk behaviors among regular and casual female sexworkers in Iran: A report fromwestern Asia

Background: Female Sex workers are at risk of obtaining sexually transmitted infections, particularly human immunodeficiency virus. Objectives: This study aimed at comparing the high-risk behaviours between regular and casual sex workers. Methods: This was a cross-sectional study conducted on sex workers from February to December, 2015, in a city of northern Iran. The research recruited 184 sex workers, who had the inclusion criteria. Three sampling methods were used to recruit the subjects. The test was conducted at an error level of 5 using the SPSS software. Results: The average age of the casual sex workers (32.53±7.39) was older than that of regular sex workers, with a significant difference (P value > 0.05). A significant association was found between the 2 groups on the inconsistent use of condoms and working in brothels (P value > 0.05). The comparison of drug use before sex was not significantly different (P value < 0.05) between the 2 groups. Conclusions: It is very essential to organize peer groups for outreach services for sex workers, which could be more appropriate and consequently decrease the relevant damage in these groups. ©2018, Iranian Journal of Psychiatry and Behavioral Sciences

The antinociceptive effects of rosuvastatin in chronic constriction injury model of male rats

Introduction: According to studies, statins possess analgesics and anti-inflammatory properties. In the present study, we examined the antinociceptive, anti-inflammatory and antioxidative effects of rosuvastatin in an experimental model of Chronic Constriction Injury (CCI). Methods: Our study was conducted on four groups; sham, CCI (the control group), CCI+rosuvastatin (i.p. 5 mg/kg), and CCI+rosuvastatin (i.p. 10 mg/kg). We performed heat hyperalgesia, cold and mechanical allodynia tests on the 3rd, 7th, 14th, and 21st after inducing CCI. Blood samples were collected to measure the serum levels of Tumor Necrosis Factor (TNF)-α, and Interleukin (IL)-6. Rats' spinal cords were also examined to measure tissue concentration of Malondialdehyde (MDA), Superoxide Dismutase (SOD), and Glutathione Peroxidase (GPx) enzymes. Results: Our findings showed that CCI resulted in significant increase in heat hyperalgesia, cold and mechanical allodynia on the 7th, 14th and 21st day. Rosuvastatin use attenuated the CCI-induced hyperalgesia and allodynia. Rosuvastatin use also resulted in reduction of TNF-α, IL-6, and MDA levels. However, rosuvastatin therapy increased the concentration of SOD and GPx in the CCI+Ros (5 mg/kg) and the CCI+Ros (10 mg/kg) groups compared to the CCI group. Conclusion: Rosuvastatin attenuated the CCI-induced neuropathic pain and inflammation. Thus, antinociceptive effects of rosuvastatin might be channeled through inhibition of inflammatory biomarkers and antioxidant properties

Mechanical collision simulation of potato tubers

This paper presents the results of an investigation on internal stress progression and the explicit dynamics simulation of the bruising behavior of potato tubers under dynamic mechanical collision. Physical measurements, mechanical tests, advanced solid modeling, and engineering simulation techniques were utilized in the study. The tuber samples used in the simulation were reverse engineered and finite element analysis (FEA) was set up to simulate the collision-based bruising behavior of the potato tubers. The total number of identical tuber models used in the simulation was 17. The numerical data of the FEA results revealed useful stress distribution and mechanical behavior visuals. These results are presented in a frame that can be used to describe bruise susceptibility value on potato-like agricultural crops. The modulus of elasticity was calculated from compression test data as 3.12 MPa. Structural stresses of 1.40 and 3.13 MPa on the impacting (hitting) and impacted (hit) tubers (respectively) were obtained. These stress values indicate that bruising is likely to occur on the tubers. This research paper provides a useful how-to-do strategy to further research on complicated bruising investigations of solid-like agricultural products through advanced engineering simulation techniques. Practical applications: This research aims to simulate realistic dynamic deformation of potato tubers during mechanical collision, which is very hard to achieve through physical or analytical expressions. This is attractive because related food processing industries have shown their interest in determining the physical properties and bruising behavior of food/agricultural products using experimental, numerical, and engineering simulation methods so that it can be used in their food processing technology. Very limited data have been found available in the literature about the subject of FEM-based explicit dynamics simulation of solid-like agricultural crops such as the self-collision case of potato tubers (which is very important for indoor or outdoor potato processing). Comparative investigations on determination of modulus of elasticity are very limited as well. Most of the research focused on single calculation theory and linear static loading assumption-based FEM simulation solutions. Here, we report a “how-to-do” case study for dynamic self-collision simulation of potato tubers

Application of Nanobiotechnology for Early Diagnosis of SARS-CoV-2 Infection in the COVID-19 Pandemic

Abstract: A most discussed topic of the new decade, COVID-19 is an infectious disease caused by the recently discovered SARS-CoV-2. With an exceedingly high transmission rate, COVID-19 has affected almost all the countries in the world. Absent any vaccine or specific treatment, the humanity is left with nothing but the legacy method of quarantine. However, quarantine can only be effective when combined with early diagnosis of suspected cases. With their high sensitivity and unmatched specificity, biosensors have become an area of interest for development of novel diagnostic methods. Compared to the more traditional diagnostics, nanobiotechnology introduces biosensors as different diagnostics with greater versatility in application. Today, a growing number of analytes are being accurately identified by these nanoscopic sensing machines. Several reports of validated application with real samples further strengthen this idea. As of recent, there has been a rise in the number of studies on portable biosensors. Despite the slow progression, certain devices with embedded biosensors have managed to be of diagnostic value in several countries. The perceptible increase in development of mobile platforms has revolutionized the healthcare delivery system in the new millennium. The present article reviews the most recent advancements in development of diagnostic nanobiosensors and their application in the clinical fields. Key points: � There is no specific treatment for highly transmissible SARS-CoV-2. � Early diagnosis is critical for control of pandemic. � Highly sensitive/specific nanobiosensors are emerging assets against COVID-19. © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature