Pengaruh Upah Insentif dan Jaminan Sosial Terhadap Produktivitas Kerja Karyawan (Studi Pada PT. Batam Textile Industry Unggaran, Semarang)

Tujuan dalam penelitian ini adalah menganalisis upah insentif mempunyai pengaruh signifikan terhadap produktivitas karyawan pada PT. Batam Textile Industry Unggaran, Semarang dan menganalisis jaminan sosial mempunyai pengaruh signifikan terhadap produktivitas karyawan pada PT. Batam Textile Industry Unggaran, Semarang Berdasarkan hasil analisis uji t-test dapat disimpulkan : Ho ditolak t hitung lebih besar dari t tabel (2,502 > 2,074) maka hal ini menunjukkan bahwa upah insentif mempunyai pengaruh yang signifikan terhadap produktivitas karyawan. Ho ditolak t hitung lebih besar dari t tabel (2,350 > 2,074), maka hal ini menunjukkan bahwa jaminan sosial mempunyai pengaruh yang signifikan terhadap produktivitas karyawan Dari hasil uji F-test dapat disimpulkan : Fhitung > Ftabel (8,073 > 4,30), maka Ho ditolak berarti ada pengaruh yang significant antara upah insentif dan jaminan sosial dengan produktivitas karyawan. Dari pengujian yang dilakukan, maka hipotesis dapat diterima, karena adanya pemberian upah insentif dan jaminan sosial yang layak dapat meningkatkan produktivitas kerja karyawan pada perusahaan tersebut. Hasil bahwa R2 sebesar 0,659. Hal ini berarti bahwa variabel produktivitas karyawan dijelaskan oleh variansi variabel upah insentif dan jaminan sosial sebesar 65,9%. Sedangkan sisanya sebesar 34,1% dijelaskan oleh variabel lai

Accelerating Creative Techno-preneuriship Through Innovative Design and Technology Integration

Creative techno-preneurship investigates a new frontier in the integration of creative technology to design more innovative entrepreneurship models to suit their business model and the goals of their organization. Entrepreneurs use this technology and approach creatively to identify opportunities from advanced creative technology research and development that can be used for entrepreneurship activities. To remain competitive, businesses must innovate. Simultaneously, technology is constantly advancing, and work-related tools are constantly changing. This forces organizations to stay current with technology and puts pressure on employees to use the technologies at their disposal to create innovative solutions that further the organization’s goals. It is hoped that this integration model will be a milestone in the trend to support future developments of digital content in particular to uplift the digital comic development in Malaysia. Keywords: creative innovation, digital technology, creative techno-preneurship, incubato

Information security risk factors and management framework for ICT outsourcing / Nik Zulkarnaen Khidzir

Information Communication Technology (ICT) services have become increasingly important in today’s business environment with most private and government agencies without sufficient resources and expertise outsourcing their ICT projects to vendors. However, this strategy could invite potentially damaging information security risks (ISRs). Subsequently, a dedicated framework for information security risk management for ICT outsourcing activities needs to be in place to address and manage its related risk factors. The research focuses on managing Information Security Risks (ISRs) in ICT outsourcing projects in a Malaysian environment. The mixed research method, combining the quantitative and qualitative was employed to achieve the research objectives. 110 respondents participated in a survey while focus groups from eight organizations were interviewed. From the quantitative study, the critical information security risks in ICT outsourcing project were identified and ranked. Furthermore, through an exploratory factor analysis, two additional critical Information Security Risk (ISR) factors were discovered, being information security management defects and the challenges of managing unexpected change of service providers. Results show that organizations practiced Information Security Risk- Identification; Information Security Risk-Analysis; Information Security Risk- Treatment Plan; Information Security Risk-Treatment Plan Implementation; Information Security Risk-Monitoring; and Information Security Risk-Control. However, there was divergence in the key activities practiced due to several factors. The findings were then used as a basis for the framework development. The framework proposed step-by-step processes, activities and guidelines to be taken in managing Information Security Risk (ISR). The case study results discovered organizations had excluded some of the processes and activities due to financial, resources and time constraints. However, the framework confirmatory done through expert-judgement proves that the framework had thoroughly assessed information security risk management from an outsourcing perspective and is applicable to ICT projects implemented in Malaysia. Fundamentally, the development of the framework will enable organizations to identify ISR factors and to urgently address them so that the full benefits of ICT outsourcing may be reaped

A model of Islamic animated infographic as an innovative approach for digital Da’wah dissemination / Nur Nazihah Rahim … [et al.]

The animated infographic is becoming increasingly popular because it can attract audience attention instead of simply writing. It becomes a practical approach in disseminating information in most appealing, fun and easiest way. As people are living in myriad information, somehow it creates some problems such as confusing and difficult in recalling such information. Thus, it is unable to give an understanding for each information. Despite this, animated infographics could be a solution to convey the information successfully. Moreover, in this context of the study, Islamic animated infographic turns into one of an innovative approach to convey the Islamic da’wah in the digital era. There were still limited studies to assist in producing a model for Islamic animated infographic for da’wah dissemination. Moreover, there was a lack of reference on Islamic animation specifically in Islamic animated infographic corresponding with the nature of da’wah dissemination through digital towards Muslim community in Malaysia. Therefore, this study intends to develop a model of Islamic animated infographic as an innovative approach in digital da’wah. The method of this study was using assessment by the experts and survey of the 111 respondents both in Islamic background and design field. The significance of the research revealed that the Islamic animated infographic model can gives total comprehension and absorption of da’wah values to understand and practice in life. Islamic animated infographic model as a tool for da’wah dissemination is not just accepted by the audience as mere entertainment but also for the purpose of da’wah dissemination as well. It can be concluded that Islamic animated infographic could be an innovative approach in disseminating da’wah using digital technology towards the Muslim community in Malaysia by express the beauty of Islam through a creative and attractive approach

3D CAD model physical analysis using additive manufacturing process

The purposes of this paper are evaluated the 3D physical quality models commencing of 3D Scanning and 3D CAD model using Additive Manufacturing of Fused Deposition Modeling (FDM) technique. The analysis is to determine their geometry errors. The physical evaluation model from 3D Scanning image processing and CAD model were compared. The analysis on the surface roughness and surface morphology of both models were carried out. The results from the analysis show that the quality model of the surface roughness and surface morphology of 3D Scanning model consist of less inclusion, irregular layers but rougher surface with uniform tessellation geometry. However the CAD model consists of inclusion but with consistent layer with smoother staircase surface geometry. These analysis findings show that the utilization of Additive Manufacturing approach to engineering science which is expected can be produced quality of manufacturing components in the future

3D CAD model physical analysis using aditive manufacturing process

The purposes of this paper are evaluated the 3D physical quality models commencing of 3D Scanning and 3D CAD model using Additive Manufacturing of Fused Deposition Modeling (FDM) technique. The analysis is to determine their geometry errors. The physical evaluation model from 3D Scanning image processing and CAD model were compared. The analysis on the surface roughness and surface morphology of both models were carried out. The results from the analysis show that the quality model of the surface roughness and surface morphology of 3D Scanning model consist of less inclusion, irregular layers but rougher surface with uniform tessellation geometry. However the CAD model consists of inclusion but with consistent layer with smoother staircase surface geometry. These analysis findings show that the utilization of Additive Manufacturing approach to engineering science which is expected can be produced quality of manufacturing components in the future

THE IMPACT OF PERSONAL PRODUCTIVITY DUE TO THE ATTACKS OF CORONAVIRUS DISEASE 2019: USING PARTIAL LEAST STRUCTURAL EQUATION MODEL

Global coronavirus disease 2019 (COVID-19) is an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The disease was first identified in December 2019 in Wuhan, the capital of China’s Hubei Province, and has since spread globally, resulting in the ongoing 2019–2020 coronavirus pandemic that has an impact which would be disturbed the personal productivity in the community. The dependent variable which is threat of COVID-19 (Thr_Cov-19), vulnerability of COVID-19 (Vul_Cov-19), and the unexpected change in society factors and one independent variable that is personal disturbance factors is used in this paper. Moreover, using as an indicator which will determine disturbance of personal productivity (D_PP) in the society. Since multiple regression by partial least square-structural equation modeling is used to examined of data by following unstructured method. Moreover, the resulting point out three dependent variables significantly influences on the independent variable of personal productivity in the society. As a matter of fact, this study concludes the foremost influence factor on D_PP in society due to COVID-19 risk factors such as Thr_Cov-19, Vul_Cov-19, and unexpected changed in the society factors. This study contributes to introductory study but vibrant understanding in stimulating the prediction of personal productivity in the society due to the COVID-19 attacks

Wettability effect and performance of nano-columnar DLC Coating via advancing sessile drop method in an ambient environmnet

Diamond-like carbon (DLC) coating is refer to amorphous carbon (a-C) or hydrogenated amorphous carbon (a-C:H) which has excellent mechanical and tribological properties. It can be used as protective coatings for optical windows and biomedical devices. Apart from that, there has been keen interest in the study of wetting properties of DLC film. The spreading behavior of a liquid on the surface of DLC coating is important to many applications especially in coatings industry. In this study, the DLC coating was produced by using RFsputtering and then it was undergone the chemical modification via electron beam (EB) irradiation. The experiment of surface wettability of DLC film was investigated under different parameters setting by using sessile drop method. In addition, the advancing sessile drop analysis also have been carried out in order to further study the effect of volume distilled water to the spreading behavior of droplets on the surface of DLC coating. The contact angle of distilled water was measured by using Image J software. The findings of this study indicate that the parameter setting of RF-sputtering and EB-irradiation are the important factors that able to influence the wettability performance of DLC film. Finally, the analysis also is expected can be enhanced the surface quality of manufacturing components in the future

Task-Technology Fit for Textile Cyberpreneur’s Intention to Adopt Cloud-based M-Retail Application

Task-Technology  Fit  (TTF)  model  has been widely used in many researches for understanding the compatibility of task characteristics and technology characteristics. Applying TTF in mobile retail (m-retail) context from the perspectives of retailers might give the insights of their intention to adopt mobile cloud application technology for online business operations. Since it is currently common for retailers such as textile cyberpreneurs to conduct m-retail via the uses of certain mobile applications and devices, it is essential to investigate the usage intention based on task-related factors. Therefore, the objective of this study is to examine the compatibility of textile cyberpreneurs’ tasks and characteristics of cloud-based m-retail application (CBMA) along with their usage intention to adopt the technology for their online business transactions. This research model surveyed 348 Malaysian textile cyberpreneurs. The results show that both task characteristics and technology characteristics have positive significant effects on task-technology fit. Further analysis also suggests the fitness between task and technology has positively influenced textile cyberpreneurs’ intention to adopt cloud-based m-retail application. The findings contributed in acknowledging the usage intention among textile cyberpreneurs based on task-related factors which might be useful for service providers in delivering the right services for end-users. The directions for future research are also discussed