335 research outputs found

    IMPACT OF DAIRY SUPPORT SERVICES AND STRATEGIES ON REDUCTION OF COST OF MILK PRODUCTION IN DIFFERENT DAIRY PRODUCTION SYSTEMS IN BANGLADESH: IMPLICATIONS FOR RURAL LIVELIHOOD IMPROVEMENT

    Get PDF
    The objective of this study was to analyse the impact of set of dairy supporting policies within the framework of the government ‘National Livestock Development Policy (NLDP)’ on the potential for reduction of cost of milk production in small-scale dairy farmers under different production systems. This study further aims at identifying the link among increasing household income and rural livelihoods-thus reducing poverty. This study applies the method developed by the International Farm Comparison Network (IFCN). The underlying principle of this method is the application of the concept of ‘Typical Farm Approach (TFA)’ and Technology Impact Policy Impact Calculations (TIPI-CAL) model. Three typical farms from three production systems (e.g. extensive, intensive and traditional) were selected from three agro-ecological zones. The required data collection was done in two steps: first, the data were collected from three baseline typical farms (status quo) operating without policy by applying the ‘Panel Approach’. In the second step, 10 different dairy supporting policy scenarios and technologies were simulated and applied in each of the base line farms in each production system and data were collected from 30 farms using the base farm as the status quo farm. The data were analysed by utilizing the extended version of TIPI-CAL (Technology Impact Policy Impact Calculations) model (TIPI-CAL software version 5.1). The results showed that improved dairy support services: improved veterinary services (IM-VHS), improved marketing access (IM-MKS), improved feeding and nutritional services (IM-FNS), community based fodder production system (CB-FPS), national breeding programme (NL-BRP) showed the highest impact on increasing milk productivity, decreasing milk production cost, increasing income from dairy and overall household income in all three production systems compared with base line farms. However, the magnitude of the impacts substantially differs among the production systems. This study also reveals that that there is a direct link among increasing income and reducing poverty since the household income increases as a result of implementing dairy support services to a level above the poverty line (1.9 US$/day equivalent to 147.96 BDT). This study results could be useful for prioritizing the policies on delivery of support services and technology and are expected to be helpful as a benchmark to implement the ‘draft policy proposal’ by the Ministry of Fisheries and Livestock (MOFL) in Bangladesh

    WDARS: A Weighted Data Aggregation Routing Strategy with Minimum Link Cost in Event-Driven WSNs

    Get PDF
    Realizing the full potential of wireless sensor networks (WSNs) highlights many design issues, particularly the trade-offs concerning multiple conflicting improvements such as maximizing the route overlapping for efficient data aggregation and minimizing the total link cost. While the issues of data aggregation routing protocols and link cost function in a WSNs have been comprehensively considered in the literature, a trade-off improvement between these two has not yet been addressed. In this paper, a comprehensive weight for trade-off between different objectives has been employed, the so-called weighted data aggregation routing strategy (WDARS) which aims to maximize the overlap routes for efficient data aggregation and link cost issues in cluster-based WSNs simultaneously. The proposed methodology is evaluated for energy consumption, network lifetime, throughput, and packet delivery ratio and compared with the InFRA and DRINA. These protocols are cluster-based routing protocols which only aim to maximize the overlap routes for efficient data aggregation. Analysis and simulation results revealed that the WDARS delivered a longer network lifetime with more proficient and reliable performance over other methods

    A cache-based approach toward improved scheduling in fog computing

    Get PDF
    Fog computing is a promising technique to reduce the latency and power consumption issues of the Internet of Things (IoT) ecosystem by enabling storage and computational resource close to the end-user devices with additional benefits such as improved execution time and processing. However, with an increase in IoT devices, the resource allocation and job scheduling became a complicated and cumbersome task due to limited and heterogeneous resources along with the locality restriction in such computing environment. Therefore, this paper proposes a cache-based approach for efficient resource allocation in fog computing environment, while maintaining the quality of service. The proposed algorithm is realized using iFogSim simulator and a comprehensive comparison is presented with the traditional First Come First Served and Shortest Job First policies. The performance evaluation revealed that with the proposed scheme the execution time, latency, processing delays and power consumption decreased by 38%, 11.1%, 6%, and 17.8%, respectively, as compared to those of the traditional schemes

    Spin asymmetry A_1^d and the spin-dependent structure function g_1^d of the deuteron at low values of x and Q^2

    Get PDF
    We present a precise measurement of the deuteron longitudinal spin asymmetry A_1^d and of the deuteron spin-dependent structure function g_1^d at Q^2 < 1 GeV^2 and 4*10^-5 < x < 2.5*10^-2 based on the data collected by the COMPASS experiment at CERN during the years 2002 and 2003. The statistical precision is tenfold better than that of the previous measurement in this region. The measured A_1^d and g_1^d are found to be consistent with zero in the whole range of x.Comment: 17 pages, 10 figure

    Physicochemical Characterization of Passive Films and Corrosion Layers by Differential Admittance and Photocurrent Spectroscopy

    Get PDF
    Two different electrochemical techniques, differential admittance and photocurrent spectroscopy, for the characterization of electronic and solid state properties of passive films and corrosion layers are described and critically evaluated. In order to get information on the electronic properties of passive film and corrosion layers as well as the necessary information to locate the characteristic energy levels of the passive film/electrolyte junction like: flat band potential (Ufb), conduction band edge (EC) or valence band edge (EV), a wide use of Mott-Schottky plots is usually reported in corrosion science and passivity studies. It has been shown, in several papers, that the use of simple M-S theory to get information on the electronic properties and energy levels location at the film/electrolyte interface can be seriously misleading and/or conflicting with the physical basis underlying the M-S theory. A critical appraisal of this approach to the study of very thin and thick anodic passive film grown on base-metals (Cr, Ni, Fe, SS etc..) or on valve metals (Ta, Nb, W etc..) is reported in this work, together with possible alternative approach to overcome some of the mentioned inconsistencies. At this aim the theory of amorphous semiconductor Schottky barrier, introduced several years ago in the study of passive film/electrolyte junction, is reviewed by taking into account some of the more recent results obtained by the present authors. Future developments of the theory appears necessary to get more exact quantitative information on the electronic properties of passive films, specially in the case of very thin film like those formed on base metals and their alloys. The second technique described in this chapter, devoted to the physico-chemical characterization of passive film and corrosion layers, is a more recent technique based on the analysis of the photo-electrochemical answer of passive film/electrolyte junction under illumination with photons having suitable energy. Such a technique usually referred to as Photocurrent Spectroscopy (PCS) has been developed on the basis of the large research effort carried out by several groups in the 1970’s and aimed to investigate the possible conversion of solar energy by means of electrochemical cells. In this work the fundamentals of semiconductor/electrolyte junctions under illumination will be highlighted both for crystalline and amorphous materials. The role of amorphous nature and film thickness on the photo-electrochemical answer of passive film/solution interface is reviewed as well the use of PCS for quantitative analysis of the film composition based on a semi-empirical correlation between optical band gap and difference of electronegativity of film constituents previously suggested by the present authors. In this frame the results of PCS studies on valve metal oxides and valve metal mixed oxides will be discussed in order to show the validity of the proposed method. The results of PCS studies aimed to get information on passive film composition and carried out by different authors on base metals (Fe, Cr, Ni) and their alloys, including stainless steel, will be also compared with compositional analysis carried out by well-established surface analysis techniques

    Mapping child growth failure across low- and middle-income countries

    Get PDF
    Childhood malnutrition is associated with high morbidity and mortality globally1. Undernourished children are more likely to experience cognitive, physical, and metabolic developmental impairments that can lead to later cardiovascular disease, reduced intellectual ability and school attainment, and reduced economic productivity in adulthood2. Child growth failure (CGF), expressed as stunting, wasting, and underweight in children under five years of age (0�59 months), is a specific subset of undernutrition characterized by insufficient height or weight against age-specific growth reference standards3�5. The prevalence of stunting, wasting, or underweight in children under five is the proportion of children with a height-for-age, weight-for-height, or weight-for-age z-score, respectively, that is more than two standard deviations below the World Health Organization�s median growth reference standards for a healthy population6. Subnational estimates of CGF report substantial heterogeneity within countries, but are available primarily at the first administrative level (for example, states or provinces)7; the uneven geographical distribution of CGF has motivated further calls for assessments that can match the local scale of many public health programmes8. Building from our previous work mapping CGF in Africa9, here we provide the first, to our knowledge, mapped high-spatial-resolution estimates of CGF indicators from 2000 to 2017 across 105 low- and middle-income countries (LMICs), where 99 of affected children live1, aggregated to policy-relevant first and second (for example, districts or counties) administrative-level units and national levels. Despite remarkable declines over the study period, many LMICs remain far from the ambitious World Health Organization Global Nutrition Targets to reduce stunting by 40 and wasting to less than 5 by 2025. Large disparities in prevalence and progress exist across and within countries; our maps identify high-prevalence areas even within nations otherwise succeeding in reducing overall CGF prevalence. By highlighting where the highest-need populations reside, these geospatial estimates can support policy-makers in planning interventions that are adapted locally and in efficiently directing resources towards reducing CGF and its health implications. © 2020, The Author(s)
    corecore