Edutainment for an enhanced learning experience (ELE)

The paper presents research findings on how effective use of edutainment content can increase learner response. It aims to showcase how learning/instructional material can be made more enticing and conducive for Z-Generation learners in academia. The paper looks at different tools (commercial and free) that can be utilized to create edutainment content and facilitate more creative and effective learning. It also explores the beneficial implications of edutainment from enhancing learner perception and engagement to learner responsiveness and knowledge retention. To measure the effects of edutainment a test case was selected in which students of selected courses were required to complete a weekly survey on their workload for an entire semester. An animated video objectively designed with edutainment at mind was used to deliver instructions on the purpose and importance of completing the survey and made available to students of a particular targeted course. Subsequently, response rate from students was by far the highest for the targeted course who received their instructions through the animated edutainment video when compared to all the other courses for all fourteen weeks of the survey

The association between sedentary leisure and physical activity in middle-aged adults

Aim The aim of this study was to examine the association between time spent in sedentary leisure and physical activity level in mid-aged men and women

Protocolised non-invasive compared with invasive weaning from mechanical ventilation for adults in intensive care : the Breathe RCT

Background: Invasive mechanical ventilation (IMV) is a life-saving intervention. Following resolution of the condition that necessitated IMV, a spontaneous breathing trial (SBT) is used to determine patient readiness for IMV discontinuation. In patients who fail one or more SBTs, there is uncertainty as to the optimum management strategy. Objective: To evaluate the clinical effectiveness and cost-effectiveness of using non-invasive ventilation (NIV) as an intermediate step in the protocolised weaning of patients from IMV. Design: Pragmatic, open-label, parallel-group randomised controlled trial, with cost-effectiveness analysis. Setting: A total of 51 critical care units across the UK. Participants: Adult intensive care patients who had received IMV for at least 48 hours, who were categorised as ready to wean from ventilation, and who failed a SBT. Interventions: Control group (invasive weaning): patients continued to receive IMV with daily SBTs. A weaning protocol was used to wean pressure support based on the patient’s condition. Intervention group (non-invasive weaning): patients were extubated to NIV. A weaning protocol was used to wean inspiratory positive airway pressure, based on the patient’s condition. Main outcome measures: The primary outcome measure was time to liberation from ventilation. Secondary outcome measures included mortality, duration of IMV, proportion of patients receiving antibiotics for a presumed respiratory infection and health-related quality of life. Results: A total of 364 patients (invasive weaning, n = 182; non-invasive weaning, n = 182) were randomised. Groups were well matched at baseline. There was no difference between the invasive weaning and non-invasive weaning groups in median time to liberation from ventilation {invasive weaning 108 hours [interquartile range (IQR) 57–351 hours] vs. non-invasive weaning 104.3 hours [IQR 34.5–297 hours]; hazard ratio 1.1, 95% confidence interval [CI] 0.89 to 1.39; p = 0.352}. There was also no difference in mortality between groups at any time point. Patients in the non-invasive weaning group had fewer IMV days [invasive weaning 4 days (IQR 2–11 days) vs. non-invasive weaning 1 day (IQR 0–7 days); adjusted mean difference –3.1 days, 95% CI –5.75 to –0.51 days]. In addition, fewer non-invasive weaning patients required antibiotics for a respiratory infection [odds ratio (OR) 0.60, 95% CI 0.41 to 1.00; p = 0.048]. A higher proportion of non-invasive weaning patients required reintubation than those in the invasive weaning group (OR 2.00, 95% CI 1.27 to 3.24). The within-trial economic evaluation showed that NIV was associated with a lower net cost and a higher net effect, and was dominant in health economic terms. The probability that NIV was cost-effective was estimated at 0.58 at a cost-effectiveness threshold of £20,000 per quality-adjusted life-year. Conclusions: A protocolised non-invasive weaning strategy did not reduce time to liberation from ventilation. However, patients who underwent non-invasive weaning had fewer days requiring IMV and required fewer antibiotics for respiratory infections. Future work: In patients who fail a SBT, which factors predict an adverse outcome (reintubation, tracheostomy, death) if extubated and weaned using NIV? Trial registration: Current Controlled Trials ISRCTN15635197. Funding: This project was funded by the National Institute for Health Research (NIHR) Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 23, No. 48. See the NIHR Journals Library website for further project information

Diagnosis, treatment, and outcome of patients with oesophagogastric cancer during the COVID-19 pandemic:national study

Background: The national response to COVID-19 has had a significant impact on cancer services. This study investigated the effect of national lockdown on diagnosis, management, and outcomes of patients with oesophagogastric cancers in Scotland. Methods: This retrospective cohort study included consecutive new patients presenting to regional oesophagogastric cancer multidisciplinary teams in National Health Service Scotland between October 2019 and September 2020. The study interval was divided into before and after lockdown, based on the first UK national lockdown. Electronic health records were reviewed and results compared. Results: Some 958 patients with biopsy-proven oesophagogastric cancer in 3 cancer networks were included: 506 (52.8 per cent) before and 452 (47.2 per cent) after lockdown. Median age was 72 (range 25–95) years and 630 patients (65.7 per cent) were men. There were 693 oesophageal (72.3 per cent) and 265 gastric (27.7 per cent) cancers. Median time to gastroscopy was 15 (range 0–337) days before versus 19 (0–261) days after lockdown (P < 0.001). Patients were more likely to present as an emergency after lockdown (8.5 per cent before versus 12.4 per cent after lockdown; P = 0.005), had poorer Eastern Cooperative Oncology group performance status, were more symptomatic, and presented with a higher stage of disease (stage IV: 49.8 per cent before versus 58.8 per cent after lockdown; P = 0.04). There was a shift to treatment with non-curative intent (64.6 per cent before versus 77.4 per cent after lockdown; P < 0.001). Median overall survival was 9.9 (95 per cent c.i. 8.7 to 11.4) months before and 6.9 (5.9 to 8.3) months after lockdown (HR 1.26, 95 per cent c.i. 1.09 to 1.46; P = 0.002). Conclusion: This national study has highlighted the adverse impact of COVID-19 on oesophagogastric cancer outcomes in Scotland. Patients presented with more advanced disease and a shift towards treatment with non-curative intent was observed, with a subsequent negative impact on overall survival

The interaction between practice and performance pressure on the planning and control of fast target directed movement

Pressure to perform often results in decrements to both outcome accuracy and the kinematics of motor skills. Furthermore, this pressure-performance relationship is moderated by the amount of accumulated practice or the experience of the performer. However, the interactive effects of performance pressure and practice on the underlying processes of motor skills are far from clear. Movement execution involves both an offline pre-planning process and an online control process. The present experiment aimed to investigate the interaction between pressure and practice on these two motor control processes. Two groups of participants (control and pressure; N = 12 and 12, respectively) practiced a video aiming amplitude task and were transferred to either a non-pressure (control group) or a pressure condition (pressure group) both early and late in practice. Results revealed similar accuracy and movement kinematics between the control and pressure groups at early transfer. However, at late transfer, the introduction of pressure was associated with increased performance compared to control conditions. Analysis of kinematic variability throughout the movement suggested that the performance increase was due to participants adopting strategies to improve movement planning in response to pressure reducing the effectiveness of the online control system

Birthing practices of traditional birth attendants in South Asia in the context of training programmes

Traditional Birth Attendants (TBA) training has been an important component of public health policy interventions to improve maternal and child health in developing countries since the 1970s. More recently, since the 1990s, the TBA training strategy has been increasingly seen as irrelevant, ineffective or, on the whole, a failure due to evidence that the maternal mortality rate (MMR) in developing countries had not reduced. Although, worldwide data show that, by choice or out of necessity, 47 percent of births in the developing world are assisted by TBAs and/or family members, funding for TBA training has been reduced and moved to providing skilled birth attendants for all births. Any shift in policy needs to be supported by appropriate evidence on TBA roles in providing maternal and infant health care service and effectiveness of the training programmes. This article reviews literature on the characteristics and role of TBAs in South Asia with an emphasis on India. The aim was to assess the contribution of TBAs in providing maternal and infant health care service at different stages of pregnancy and after-delivery and birthing practices adopted in home births. The review of role revealed that apart from TBAs, there are various other people in the community also involved in making decisions about the welfare and health of the birthing mother and new born baby. However, TBAs have changing, localised but nonetheless significant roles in delivery, postnatal and infant care in India. Certain traditional birthing practices such as bathing babies immediately after birth, not weighing babies after birth and not feeding with colostrum are adopted in home births as well as health institutions in India. There is therefore a thin precarious balance between the application of biomedical and traditional knowledge. Customary rituals and perceptions essentially affect practices in home and institutional births and hence training of TBAs need to be implemented in conjunction with community awareness programmes

Design of a Customized Neck Orthosis for FDM Manufacturing with a New Sustainable Bio-composite

The interest in developing customized external orthopaedic devices, thanks to the advent of Additive Manufacturing (AM), has grown in recent years. Greater attention was focused on upper limb casts, while applications to other body’s parts, such as the neck, were less investigated. In this paper the computer aided design (CAD) modelling, assessment and 3D printing with fused deposition modelling (FDM) of a customized neck orthosis are reported. The modelling, based on anatomic data of a volunteer subject, was aimed to obtain a lightweight, ventilated, hygienic and comfortable orthosis compared to the produced medical devices generally used for neck injuries. CAD models with different geometrical patterns, introduced for lightening and improving breathability, were considered, specifically, a honeycomb pattern and an elliptical holes pattern. These models were structurally assessed by means of finite elements analysis (FEA). Furthermore, an innovative composite material was considered for 3D printing. The material, Hemp Bio-Plastic® (HBP), composed by polylactic acid (PLA) and hemp shives, offers different advantages including lightweight, improved superficial finish and antibacterial properties. The results obtained in terms of design methodology and manufacturing by 3D printing of a prototype have shown the feasibility to develop customized cervical orthoses, with potentially improved performance with respect to cervical collars available on the market also thanks to the use of the innovative composite material