23 research outputs found
Miconazole Nitrate based cubosome hydrogels for topical application
Cubosomes are discrete, sub-micron, nano-structured particles of bicontinuous cubic liquid crystalline phase. Cubosomes consist of honeycombed (cavernous) structures separating two internal aqueous channels and a large interfacial area. They are the biocompatible novel approach for the drug delivery system. The controlled release application of these nanoparticles is of a great significance in cosmeceutical and pharmaceutical fields. The present study is concerned with the design and evaluation of a novel nano-particulate system; cubosomes, loaded with miconazole nitrate (MN); which is used as antifungal agent. Cubosome dispersions were formulated by emulsification technique using different concentrations of a lipid phase monoolein and the nonionic surfactant, Poloxamer 407. The prepared cubosomal dispersions were characterized regarding dimensional distribution, particle size, and in vitro drug release. The optimum formulae were incorporated in a CMC or HPMC based hydrogels, to form cubosomal hydrogels (cubogels). The cubogels were characterized regarding in vitro release of (MN), viscosity and pH. A comparison between the cubogels and a commercially available product, MiconazÂź cream, was carried out to judge their efficacy. The drug release from the commercial preparation was lower than all the prepared nano-emulsion based gel formulations. G1 and G8 showed highest drug release percent (100%) after 8 hours, in contrast the marketed formulation released (44.8%) of the drug after 8 hrs. The in vitro Miconazole nitrate release data were fitted to Korsmeyerpeppa's release model. The formulation exhibited non-fickian transport with zero order kinetics. Formulae G1, G8 and G10, that showed both small droplet size and highest extent of drug release, were microbiologically evaluated against Candida albicans (C. albicans) using agar cup diffusion method. The selected formulae showed superior antimycotic activity compared to the commercially available formulation
Miconazole Nitrate based cubosome hydrogels for topical application
Cubosomes are discrete, sub-micron, nano-structured particles of bicontinuous cubic liquid crystalline phase. Cubosomes consist of honeycombed (cavernous) structures separating two internal aqueous channels and a large interfacial area. They are the biocompatible novel approach for the drug delivery system. The controlled release application of these nanoparticles is of a great significance in cosmeceutical and pharmaceutical fields. The present study is concerned with the design and evaluation of a novel nano-particulate system; cubosomes, loaded with miconazole nitrate (MN); which is used as antifungal agent. Cubosome dispersions were formulated by emulsification technique using different concentrations of a lipid phase monoolein and the nonionic surfactant, Poloxamer 407. The prepared cubosomal dispersions were characterized regarding dimensional distribution, particle size, and in vitro drug release. The optimum formulae were incorporated in a CMC or HPMC based hydrogels, to form cubosomal hydrogels (cubogels). The cubogels were characterized regarding in vitro release of (MN), viscosity and pH. A comparison between the cubogels and a commercially available product, MiconazÂź cream, was carried out to judge their efficacy. The drug release from the commercial preparation was lower than all the prepared nano-emulsion based gel formulations. G1 and G8 showed highest drug release percent (100%) after 8 hours, in contrast the marketed formulation released (44.8%) of the drug after 8 hrs. The in vitro Miconazole nitrate release data were fitted to Korsmeyerpeppa's release model. The formulation exhibited non-fickian transport with zero order kinetics. Formulae G1, G8 and G10, that showed both small droplet size and highest extent of drug release, were microbiologically evaluated against Candida albicans (C. albicans) using agar cup diffusion method. The selected formulae showed superior antimycotic activity compared to the commercially available formulation
LORNOXICAM-LOADED NANOSPONGES FOR CONTROLLED ANTI-INFLAMMATORY EFFECT: IN VITRO/IN VIVO ASSESSMENT
Objective: To design a controlled topical delivery system of lornoxicam (LX) in order to enhance skin permeation and treatment efficacy. Nanosponges were selected as a novel carrier for this purpose.
Methods: Nanosponges were formulated via the emulsion solvent evaporation method using ethyl cellulose (polymer) and polyvinyl alcohol (surfactant). Nanosponge dispersions were characterized for colloidal properties, entrapment efficiency and in vitro release study. The nanosponge formulation (LS1) was then incorporated into carboxymethyl cellulose sodium hydrogels and evaluated for pH, viscosity and in vitro drug release. Skin irritation was evaluated, and anti-inflammatory activity was assessed via rat hind paw edema method.
Results: Nanosponges were in the nano-sized range and attained a uniform round shape with a spongy structure. LS1exhibited the highest LX release after 6 h, so it was incorporated as hydrogel. Formulated hydrogels showed acceptable physicochemical parameters (pH, drug content and rheological properties). Skin irritation testing proved LX-loaded nanosponge hydrogel formulation (G1) to be non-irritant. In vivo study revealed an enhanced anti-inflammatory activity of G1 for 6 h (p<0.001).
Conclusion: The developed nanosponge hydrogel is an efficient nanocarrier for improved and controlled topical delivery of LX
ZOLMITRIPTAN BRAIN TARGETING VIA INTRANASAL ROUTE USING SOLID LIPID NANOPARTICLES FOR MIGRAINE THERAPY: FORMULATION, CHARACTERIZATION, IN-VITRO AND IN-VIVO ASSESSMENT
Objective: Zolmitriptan, a class of antidepressant drugs with poor bioavailability due to its first-pass metabolism. The aim of this study was to improve systemic bioavailability and explore the brain targeting impact of nasal Zolmitriptan (Zol) solid lipid nanoparticles (SLNs) gel for migraine treatment.
Methods: Stearic acid and cholesterol used as solid lipid and lecithin as a surfactant, emulsion solvent evaporation technique was used to produce Zolmitriptan SLNs. (Zol) SLNs were characterized for particle size, percent entrapment efficiency and in vitro drug release. Formula S6 showed greater percent entrapment efficiency (PEE), adequate particle size and sustained drug release behavior. Formula S6 was integrated into HPMC gel (3%) to prepare nasal gel. Zol SLN nasal gel was subjected to histopathological study to ensure brain targeting.
Results: It was observed that all prepared Zol SLNs were in the nano-sized range with a polydispersity index of<0.5. In the cholesterol/lecithin combination, higher PEE%, better stability, and less agglomeration inclination were discovered. Results of the release profiles showed that developed Zol-SLNs were able to release Zolmitriptan in a sustained manner. Histopathological study of the brain tissues showed that Zolmitriptan SLN nasal gel can reach brain cells and localized for 24 h although the hydrophobicity of the target drug.
Conclusion: Intranasal administration of Solid lipid nanostructure of Zolmitriptan through the olfactory pathway in which it travels from the nasal cavity to brain tissue achieved drug targeting potential of about 90% compared with conventional Zolmitriptan tablets. The small particle size helped them to squeeze themselves through the small opening in the olfactory neurons to the brain via different endo-cystic pathways of neuronal cells in nasal tissue membranes
FABRICATION OF BIOADHESIVE OCUSERT WITH DIFFERENT POLYMERS: ONCE A DAY DOSE
Objective: The objective of this current study is to fabricate ocuserts to control the drug release from chosen bioadhesive polymeric matrixes to enhance patient compliance. Ciprofloxacin HCl (CFX HCl) was selected as a model drug.Methods: Different bioadhesive polymers with different film forming capabilities namely Hydroxy Propyl Methyl Cellulose (HPMC K4M), Poly Vinyl Alcohol (PVA), Sodium Carboxy Methyl Cellulose (Na CMC), Hydroxy Propyl Cellulose (HPC), Sodium Alginate (Na Alg.), pullulan and Xanthan Gum (XG) in different ratios were used in fabricating ocuserts using solvent-casting technique. Propylene Glycol (PG) was used as a plasticizer to facilitate the fabrication process. Characterization tests of the developed ocuserts were performed as well as bioadhesive tests and in vitro release studies of the incorporated drug. The obtained results were analysed using different release kinetic models. Stability of the selected ocuserts was investigated at 40ñ0.5 ðC and 75ñ5% Relative Humidity (RH) for three months' storage period. In vivo ocular irritation test was performed to investigate the safety of the formula in rabbits' eyes as well as to test the release profile and thus to estimate In vitro In vivo correlation.Results: All the prepared ocuserts showed the uniformity of film characterization and bioadhesion strength ranged from 240ñ66 and 158ñ52dyne/cm2. Selected formula from the in vitro release study tested for in vivo study showed the slow release of ciprofloxacin drug up to 24 h with no signs of eye irritancy. Results for In vitro In vivo correlation showed an excellent correlation with R2 value of 0.9982.Conclusion: PVA based ocuserts proven to be a promising once-daily, effective and safe ocular delivery system of the drug
One Hundred Priority Questions for the Development of Sustainable Food Systems in Sub-Saharan Africa
Sub-Saharan Africa is facing an expected doubling of human population and tripling of food demand over the next quarter century, posing a range of severe environmental, political, and socio-economic challenges. In some cases, key Sustainable Development Goals (SDGs) are in direct conflict, raising difficult policy and funding decisions, particularly in relation to trade-offs between food production, social inequality, and ecosystem health. In this study, we used a horizon-scanning approach to identify 100 practical or research-focused questions that, if answered, would have the greatest positive impact on addressing these trade-offs and ensuring future productivity and resilience of food-production systems across sub-Saharan Africa. Through direct canvassing of opinions, we obtained 1339 questions from 331 experts based in 55 countries. We then used online voting and participatory workshops to produce a final list of 100 questions divided into 12 thematic sections spanning topics from gender inequality to technological adoption and climate change. Using data on the background of respondents, we show that perspectives and priorities can vary, but they are largely consistent across different professional and geographical contexts. We hope these questions provide a template for establishing new research directions and prioritising funding decisions in sub-Saharan Africa
Identification of embryonic lethal genes in humans by autozygosity mapping and exome sequencing in consanguineous families
Recommended from our members
One hundred priority questions for the development of sustainable food systems in sub-Saharan Africa
Sub-Saharan Africa is facing an expected doubling of human population and tripling of food demand over the next quarter century, posing a range of severe environmental, political, and socio-economic challenges. In some cases, key Sustainable Development Goals (SDGs) are in direct conflict, raising difficult policy and funding decisions, particularly in relation to trade-offs between food production, social inequality, and ecosystem health. In this study, we used a horizon-scanning approach to identify 100 practical or research-focused questions that, if answered, would have the greatest positive impact on addressing these trade-offs and ensuring future productivity and resilience of food-production systems across sub-Saharan Africa. Through direct canvassing of opinions, we obtained 1339 questions from 331 experts based in 55 countries. We then used online voting and participatory workshops to produce a final list of 100 questions divided into 12 thematic sections spanning topics from gender inequality to technological adoption and climate change. Using data on the background of respondents, we show that perspectives and priorities can vary, but they are largely consistent across different professional and geographical contexts. We hope these questions provide a template for establishing new research directions and prioritising funding decisions in sub-Saharan Africa
Impact of opioid-free analgesia on pain severity and patient satisfaction after discharge from surgery: multispecialty, prospective cohort study in 25 countries
Background: Balancing opioid stewardship and the need for adequate analgesia following discharge after surgery is challenging. This study aimed to compare the outcomes for patients discharged with opioid versus opioid-free analgesia after common surgical procedures.Methods: This international, multicentre, prospective cohort study collected data from patients undergoing common acute and elective general surgical, urological, gynaecological, and orthopaedic procedures. The primary outcomes were patient-reported time in severe pain measured on a numerical analogue scale from 0 to 100% and patient-reported satisfaction with pain relief during the first week following discharge. Data were collected by in-hospital chart review and patient telephone interview 1 week after discharge.Results: The study recruited 4273 patients from 144 centres in 25 countries; 1311 patients (30.7%) were prescribed opioid analgesia at discharge. Patients reported being in severe pain for 10 (i.q.r. 1-30)% of the first week after discharge and rated satisfaction with analgesia as 90 (i.q.r. 80-100) of 100. After adjustment for confounders, opioid analgesia on discharge was independently associated with increased pain severity (risk ratio 1.52, 95% c.i. 1.31 to 1.76; P < 0.001) and re-presentation to healthcare providers owing to side-effects of medication (OR 2.38, 95% c.i. 1.36 to 4.17; P = 0.004), but not with satisfaction with analgesia (beta coefficient 0.92, 95% c.i. -1.52 to 3.36; P = 0.468) compared with opioid-free analgesia. Although opioid prescribing varied greatly between high-income and low- and middle-income countries, patient-reported outcomes did not.Conclusion: Opioid analgesia prescription on surgical discharge is associated with a higher risk of re-presentation owing to side-effects of medication and increased patient-reported pain, but not with changes in patient-reported satisfaction. Opioid-free discharge analgesia should be adopted routinely
A year of genomic surveillance reveals how the SARS-CoV-2 pandemic unfolded in Africa.
The progression of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic in Africa has so far been heterogeneous, and the full impact is not yet well understood. In this study, we describe the genomic epidemiology using a dataset of 8746 genomes from 33 African countries and two overseas territories. We show that the epidemics in most countries were initiated by importations predominantly from Europe, which diminished after the early introduction of international travel restrictions. As the pandemic progressed, ongoing transmission in many countries and increasing mobility led to the emergence and spread within the continent of many variants of concern and interest, such as B.1.351, B.1.525, A.23.1, and C.1.1. Although distorted by low sampling numbers and blind spots, the findings highlight that Africa must not be left behind in the global pandemic response, otherwise it could become a source for new variants