351 research outputs found

    On the hygrothermomechanical characterization of polyvinyl acetate

    Get PDF
    As a part of a program to understand the mechanisms of failure in time-dependent adhesion and film bonding, the creep compliance of polyvinyl acetate (PVAc) in shear has been determined both as a function of temperature and absorbed moisture. Volumetric expansion as a function of temperature or moisture takeup was also measured. We find that practically realizable changes in moisture content affect both the creep compliance and the swelling of PVAc to a degree comparable to that resulting from realistic changes in temperature. For example, the creep rates (histories) at corresponding times for PVAc subjected to 92% relative humidity storage are accelerated by approximately four orders of magnitude over those found for the dry material. Moreover, we find within reasonable experimental error that water concentration affects the time scale of creep like temperature through a concentration-dependent shift factor. An attempt is made at discussing the interrelation of temperature- and moisture-induced volume changes

    Packaging, deployment, and panel design concepts for a truss-stiffened 7-panel precision deployable reflector with feed boom

    Get PDF
    A concept is presented for achieving a remotely deployable truss-stiffened reflector consisting of seven integrated sandwich panels that form the reflective surface, and an integrated feed boom. The concept has potential for meeting aperture size and surface precision requirements for some high-frequency microwave remote sensing applications. The packaged reflector/feed boom configuration is a self-contained unit that can be conveniently attached to a spacecraft bus. The package has a cylindrical envelope compatible with typical launch vehicle shrouds. Dynamic behavior of a deployed configuration having a 216-inch focal length and consisting of 80-inch-diameter, two-inch-thick panels is examined through finite-element analysis. Results show that the feed boom and spacecraft bus can have a large impact on the fundamental frequency of the deployed configuration. Two candidate rib-stiffened sandwich panel configurations for this application are described, and analytical results for panel mass and stiffness are presented. Results show that the addition of only a few rib stiffeners, if sufficiently deep, can efficiently improve sandwich panel stiffness

    Comparison of Autoclave and Out-of-Autoclave Composites

    Get PDF
    The National Aeronautics and Space Administration (NASA) Exploration Systems Mission Directorate initiated an Advanced Composite Technology Project through the Exploration Technology Development Program in order to support the polymer composite needs for future heavy lift launch architectures. As an example, the large composite dry structural applications on Ares V inspired the evaluation of autoclave and out-of-autoclave (OOA) composite materials. A NASA and industry team selected the most appropriate materials based on component requirements for a heavy lift launch vehicle. Autoclaved and OOA composites were fabricated and results will highlight differences in processing conditions, laminate quality, as well as initial room temperature thermal and mechanical performance. Results from this study compare solid laminates that were both fiber-placed and hand-laid. Due to the large size of heavy-lift launch vehicle composite structures, there is significant potential that the uncured composite material or prepreg will experience significant out-life during component fabrication. Therefore, prepreg out-life was a critical factor examined in this comparison. In order to rigorously test material suppliers recommended out-life, the NASA/Industry team extended the out-time of the uncured composite prepreg to values that were approximately 50% beyond the manufacturers out-time limits. Early results indicate that the OOA prepreg composite materials suffered in both composite quality and mechanical property performance from their extended out-time. However, the OOA materials performed similarly to the autoclaved composites when processed within a few days of exposure to ambient "shop" floor handling. Follow on studies evaluating autoclave and OOA aluminum honeycomb core sandwich composites are planned

    NIK Stabilization in Osteoclasts Results in Osteoporosis and Enhanced Inflammatory Osteolysis

    Get PDF
    Maintenance of healthy bone requires the balanced activities of osteoclasts (OCs), which resorb bone, and osteoblasts, which build bone. Disproportionate action of OCs is responsible for the bone loss associated with postmenopausal osteoporosis and rheumatoid arthritis. NF-κB inducing kinase (NIK) controls activation of the alternative NF-κB pathway, a critical pathway for OC differentiation. Under basal conditions, TRAF3-mediated NIK degradation prevents downstream signaling, and disruption of the NIK:TRAF3 interaction stabilizes NIK leading to constitutive activation of the alternative NF-κB pathway.Using transgenic mice with OC-lineage expression of NIK lacking its TRAF3 binding domain (NT3), we now find that alternative NF-κB activation enhances not only OC differentiation but also OC function. Activating NT3 with either lysozyme M Cre or cathepsinK Cre causes high turnover osteoporosis with increased activity of OCs and osteoblasts. In vitro, NT3-expressing precursors form OCs more quickly and at lower doses of RANKL. When cultured on bone, they exhibit larger actin rings and increased resorptive activity. OC-specific NT3 transgenic mice also have an exaggerated osteolytic response to the serum transfer model of arthritis.Constitutive activation of NIK drives enhanced osteoclastogenesis and bone resorption, both in basal conditions and in response to inflammatory stimuli

    Epidemiology of Streptococcus pneumoniae and Staphylococcus aureus colonization in healthy Venezuelan children

    Get PDF
    Streptococcus pneumoniae and Staphylococcus aureus cause significant morbidity and mortality worldwide. We investigated both the colonization and co-colonization characteristics for these pathogens among 250 healthy children from 2 to 5 years of age in Merida, Venezuela, in 2007. The prevalence of S. pneumoniae colonization, S. aureus colonization, and S. pneumoniae–S. aureus co-colonization was 28%, 56%, and 16%, respectively. Pneumococcal serotypes 6B (14%), 19F (12%), 23F (12%), 15 (9%), 6A (8%), 11 (8%), 23A (6%), and 34 (6%) were the most prevalent. Non-respiratory atopy was a risk factor for S. aureus colonization (p = 0.017). Vaccine serotypes were negatively associated with preceding respiratory infection (p = 0.02) and with S. aureus colonization (p = 0.03). We observed a high prevalence of pneumococcal resistance against trimethoprim–sulfamethoxazole (40%), erythromycin (38%), and penicillin (14%). Semi-quantitative measurement of pneumococcal colonization density showed that children with young siblings and low socioeconomic status were more densely colonized (p = 0.02 and p = 0.02, respectively). In contrast, trimethoprim–sulfamethoxazole- and multidrug-resistant-pneumococci colonized children sparsely (p = 0.03 and p = 0.01, respectively). Our data form an important basis to monitor the future impact of pneumococcal vaccination on bacterial colonization, as well as to recommend a rationalized and restrictive antimicrobial use in our community

    STAT3/LKB1 controls metastatic prostate cancer by regulating mTORC1/CREB pathway

    Get PDF
    Prostate cancer (PCa) is a common and fatal type of cancer in men. Metastatic PCa (mPCa) is a major factor contributing to its lethality, although the mechanisms remain poorly understood. PTEN is one of the most frequently deleted genes in mPCa. Here we show a frequent genomic co-deletion of PTEN and STAT3 in liquid biopsies of patients with mPCa. Loss of Stat3 in a Pten-null mouse prostate model leads to a reduction of LKB1/pAMPK with simultaneous activation of mTOR/CREB, resulting in metastatic disease. However, constitutive activation of Stat3 led to high LKB1/pAMPK levels and suppressed mTORC1/CREB pathway, preventing mPCa development. Metformin, one of the most widely prescribed therapeutics against type 2 diabetes, inhibits mTORC1 in liver and requires LKB1 to mediate glucose homeostasis. We find that metformin treatment of STAT3/AR-expressing PCa xenografts resulted in significantly reduced tumor growth accompanied by diminished mTORC1/CREB, AR and PSA levels. PCa xenografts with deletion of STAT3/AR nearly completely abrogated mTORC1/CREB inhibition mediated by metformin. Moreover, metformin treatment of PCa patients with high Gleason grade and type 2 diabetes resulted in undetectable mTORC1 levels and upregulated STAT3 expression. Furthermore, PCa patients with high CREB expression have worse clinical outcomes and a significantly increased risk of PCa relapse and metastatic recurrence. In summary, we have shown that STAT3 controls mPCa via LKB1/pAMPK/mTORC1/CREB signaling, which we have identified as a promising novel downstream target for the treatment of lethal mPCa

    Mouse Genome-Wide Association and Systems Genetics Identify Asxl2 As a Regulator of Bone Mineral Density and Osteoclastogenesis

    Get PDF
    Significant advances have been made in the discovery of genes affecting bone mineral density (BMD); however, our understanding of its genetic basis remains incomplete. In the current study, genome-wide association (GWA) and co-expression network analysis were used in the recently described Hybrid Mouse Diversity Panel (HMDP) to identify and functionally characterize novel BMD genes. In the HMDP, a GWA of total body, spinal, and femoral BMD revealed four significant associations (−log10P>5.39) affecting at least one BMD trait on chromosomes (Chrs.) 7, 11, 12, and 17. The associations implicated a total of 163 genes with each association harboring between 14 and 112 genes. This list was reduced to 26 functional candidates by identifying those genes that were regulated by local eQTL in bone or harbored potentially functional non-synonymous (NS) SNPs. This analysis revealed that the most significant BMD SNP on Chr. 12 was a NS SNP in the additional sex combs like-2 (Asxl2) gene that was predicted to be functional. The involvement of Asxl2 in the regulation of bone mass was confirmed by the observation that Asxl2 knockout mice had reduced BMD. To begin to unravel the mechanism through which Asxl2 influenced BMD, a gene co-expression network was created using cortical bone gene expression microarray data from the HMDP strains. Asxl2 was identified as a member of a co-expression module enriched for genes involved in the differentiation of myeloid cells. In bone, osteoclasts are bone-resorbing cells of myeloid origin, suggesting that Asxl2 may play a role in osteoclast differentiation. In agreement, the knockdown of Asxl2 in bone marrow macrophages impaired their ability to form osteoclasts. This study identifies a new regulator of BMD and osteoclastogenesis and highlights the power of GWA and systems genetics in the mouse for dissecting complex genetic traits

    Effects of Charge State and Cationizing Agent on the Electron Capture Dissociation of a Peptide

    Get PDF
    Electron capture dissociation (ECD) is a promising method for de novo sequencing proteins and peptides and for locating the positions of labile posttranslational modifications and binding sites of noncovalently bound species. We report the ECD of a synthetic peptide containing 10 alanine residues and 6 lysine residues uniformly distributed across the sequence. ECD of the (M + 2H) 2+ produces a limited range of c (c 7 -c 15 ) and z (z 9 -z 15 ) fragment ions, but ECD of higher charge states produces a wider range of c (c 2 -c 15 ) and z (z 2 -z 6 , z 9 -z 15 ) ions. Although mass spectrometry (MS) and tandem mass spectrometry (MS/MS) have been used to characterize peptides for more than three decades, 1,2 the developments of electrospray ionization (ESI) 3 and matrix-assisted laser desorption/ionization 4 have dramatically expanded the size and type of molecules amenable to characterization by MS/MS. For example, ESI has been used to form intact gas-phase ions from virus particles (4.0 × 10 7 Da) 5 and DNA molecules as large as 1.2 × 10 8 Da. 6 ESI-MS and ESI-MS/MS experiments can be performed using as little as 10 -18 mol of sample. 7 For these measurements, Fourier transform (FT) MS has the advantages of ultrahigh resolution, multichannel detection, and MS n capabilities. 8,9 Dissociation methods in FTMS, including collisionally activated dissociation (CAD), 10 surface-induced dissociation, 11,12 infrared multiphoton dissociation, 13 and blackbody infrared radiative dissociation, 14,15 have been used to obtain sequence information and locations of posttranslational modifications (PTMs) in biomolecules. With these activation methods, the most labile bonds within an ion are typically cleaved. This often produces incomplete sequence coverage, the loss of PTMs, and a lack of backbone cleavages within regions enclosed by disulfide bridges. The recently developed method of electron capture dissociation (ECD), [16][17][18][19][20][21][22][23][24][25
    corecore