Soil Mapping Using Electromagnetic Induction to Assess the Suitability of Land for Growing Leptospermum nitens in Western Australia

Leptospermum sp. with dihydroxyacetone in their nectar are a source of high-value medicinal honey production and can provide income from agriculturally marginal lands. The current study was from two newly planted Leptospermum nitens sites, one with duplex soil and the other in deep sandy soil, in the low rainfall areas of the south-west of Western Australia, with the aim of identifying key soil parameters influencing the plantation’s survival and growth. Electromagnetic induction (EMI) at different depths was used to investigate the possible impact of soil variability on the Leptospermum nitens plantations. Two EMI surveys were conducted at each site, at different times of the year, to account for soil moisture variability (relatively dry and wet conditions). A least-square inversion algorithm was used to determine true electrical conductivities at three different soil depths (0–0.5, 0.5–0.8, and 0.8–1.6 m) to produce quasi-3D maps of soil inverted electrical conductivity. Corresponding soil samples from each depth were used for the physico-chemical analysis of soil parameters and to develop laboratory-based electrical resistivity to soil volumetric moisture calibrations with R2 values between 0.95 and 0.99. Shrub survival and growth (canopy diameter) were estimated using unmanned aerial vehicle (UAV) images and machine learning. Comparing EMI soil mapping with UAV imagery results showed significantly greater shrub survival and growth (p < 0.001) in areas with higher ECa ranges of 12–24 mS m−1 at the variable textured site and 6–9 mS m−1 at the uniformly sandy site. Overall, the variable textured site, with an 82% survival rate, had a significantly higher shrub count and larger plants than the uniformly sandy site, with a 75% survival rate. A principal component analysis (PCA) identified inverted EC to be strongly correlated with soil moisture > pH > soil texture. Such soil mapping may be a robust and effective method for risk assessment of new shrub plantations

Crop Updates 2009 - Genetically Modified Crops, Nutrition, Soils, & Others

This session covers fifteen papers from different authors: 1. Performance of Canola Breeders Roundup Ready® canola hybrid CHYB-166 in 2008, Wallace Cowling, Canola Breeders Western Australia Pty Ltd 2. The implications of GM glyphosate resistant lupin, Art Diggle, Caroline Peek, Frank D’Emden, Fiona Evans, Bob French, Rob Grima, Sam Harburg, Abul Hashem,, John Holmes, Jeremy Lemon, Peter Newman, Janet Paterson, Steve Penny,Department of Agriculture and Food, Peter Portmann, Agriconnect 3. Nufarm Roundup Ready® Canola Systems Trials— 2008 Mark Slatter, Research and Development Officer, Victoria, Nufarm (0438 064 845) Angus MacLennan, Business Development Manager, New South Wales, Nufarm (0408 358 024) Cooperators: Monsanto, Nuseed, Pacific Seeds, Pioneer Seeds 4. Roundup Ready® canola—2008 Limited Commercial Release. Getting the system right, Andrew Wells and Mark Slatter, Nufarm Australia Limited (Reprint from 2008 GRDC Cropping Updates with Introductory note) NUTRITION 5. Fertilising in a changing price environment, Bill Bowden1, Wayne Pluske2 and Jeremy Lemon1, 1Department of Agriculture and Food, 2Back Paddock Company 6. Making better fertiliser for Western Australian cropping systems, Wen Chen1 2, Geoff Anderson1, Ross Brennan1and Richard Bell2 1Department of Agriculture and Food, 2School of Environmental Science, Murdoch University 7. The nitrogen fertiliser replacement value of biosolids from wastewater treatment, Hannah Rigby1, Deborah Pritchard1, David Collins1, Katrina Walton2, David Allen2 and Nancy Penney31School of Agriculture and Environment,Curtin University of Technology, Muresk Campus, 2Chemistry Centre of Western Australia 3Water Corporation of Western Australia 8. Fertilising to soil type (usually) pays, Michael Robertson, Bill Bowden and Roger Lawes, CSIRO, Floreat and Department of Agriculture and Food SOILS 9. Management of subsoil acidity and compaction using a combination of lime, deep ripping and controlled traffic, Stephen Davies, Chris Gazey, Breanne Best and David Gartner, Department of Agriculture and Food 10. Optimising gypsum applications through remote sensing and Variable Rate Technology, Frank D’Emden, Department of Agriculture and Food and Quenten Knight,Precision Agronomics Australia 11. Case study of a 17 year agricultural lime trial, Chris Gazey1, Joel Andrew2and Ryan Pearce3 1Department of Agriculture and Food; 2Precision SoilTech; 3ConsultAg 12. Soil organic carbon in WA agricultural soils, FC Hoyle and A Bennett, Department of Agriculture and Food OTHER 13. Is the no-till revolution complete in WA? Frank D’Emden1, Rick Llewellyn2 and Ken Flower3 1Department of Agriculture and Food, 2CSIRO Sustainable Ecosystems, 3University of Western Australia 14. Progression Planning (The Concept), Julian Krieg and Owen Catto, Wheatbelt Men’s Health 15. Is the Department of Agriculture and Food still a primary source of cropping information? Cindy Parsons, Department of Agriculture and Foo

Scleroderma and related disorders: 223. Long Term Outcome in a Contemporary Systemic Sclerosis Cohort

Background: We have previously compared outcome in two groups of systemic sclerosis (SSc) patients with disease onset a decade apart and we reported data on 5 year survival and cumulative incidence of organ disease in a contemporary SSc cohort. The present study examines longer term outcome in an additional cohort of SSc followed for 10 years. Methods: We have examined patients with disease onset between years 1995 and 1999 allowing for at least 10 years of follow-up in a group that has characteristics representative for the patients we see in contemporary clinical practice. Results: Of the 398 patients included in the study, 252 (63.3%) had limited cutaneous (lc) SSc and 146 (36.7%) had diffuse cutaneous (dc) SSc. The proportion of male patients was higher among the dcSSc group (17.1% v 9.9%, p = 0.037) while the mean age of onset was significantly higher among lcSSc patients (50 ± 13 v 46 ± 13 years ± SD, p = 0.003). During a 10 year follow-up from disease onset, 45% of the dcSSc and 21% of the lcSSc subjects developed clinically significant pulmonary fibrosis, p < 0.001. Among them approximately half reached the endpoint within the first 3 years (23% of dcSSc and 10% of lcSSc) and over three quarters within the first 5 years (34% and 16% respectively). There was a similar incidence of pulmonary hypertension (PH) in the two subsets with a steady rate of increase over time. At 10 years 13% of dcSSc and 15% of lcSSc subjects had developed PH (p=0.558), with the earliest cases observed within the first 2 years of disease. Comparison between subjects who developed PH in the first and second 5 years from disease onset demonstrated no difference in demographic or clinical characteristics, but 5-year survival from PH onset was better among those who developed this complication later in their disease (49% v 24%), with a strong trend towards statistical significance (p = 0.058). Incidence of SSc renal crisis (SRC) was significantly higher among the dcSSc patients (12% v 4% in lcSSc, p = 0.002). As previously observed, the rate of development of SRC was highest in the first 3 years of disease- 10% in dcSSc and 3% in lcSSc. All incidences of clinically important cardiac disease developed in the first 5 years from disease onset (7% in dcSSc v 1% in lcSSc, p < 0.001) and remained unchanged at 10 years. As expected, 10-year survival among lcSSc subjects was significantly higher (81%) compared to that of dcSSc patients (70%, p = 0.006). Interestingly, although over the first 5 years the death rate was much higher in the dcSSc cohort (16% v 6% in lcSSc), over the following years it became very similar for both subsets (14% and 13% between years 5 and 10, and 18% and 17% between years 10 and 15 for dcSSc and lcSSc respectively). Conclusions: Even though dcSSc patients have higher incidence for most organ complications compared to lcSSc subjects, the worse survival among them is mainly due to higher early mortality rate. Mortality rate after first 5 years of disease becomes comparable in the two disease subsets. Disclosure statement: The authors have declared no conflicts of interes

Energy Resolution Performance of the CMS Electromagnetic Calorimeter

The energy resolution performance of the CMS lead tungstate crystal electromagnetic calorimeter is presented. Measurements were made with an electron beam using a fully equipped supermodule of the calorimeter barrel. Results are given both for electrons incident on the centre of crystals and for electrons distributed uniformly over the calorimeter surface. The electron energy is reconstructed in matrices of 3 times 3 or 5 times 5 crystals centred on the crystal containing the maximum energy. Corrections for variations in the shower containment are applied in the case of uniform incidence. The resolution measured is consistent with the design goals

Finishing the euchromatic sequence of the human genome

The sequence of the human genome encodes the genetic instructions for human physiology, as well as rich information about human evolution. In 2001, the International Human Genome Sequencing Consortium reported a draft sequence of the euchromatic portion of the human genome. Since then, the international collaboration has worked to convert this draft into a genome sequence with high accuracy and nearly complete coverage. Here, we report the result of this finishing process. The current genome sequence (Build 35) contains 2.85 billion nucleotides interrupted by only 341 gaps. It covers ∼99% of the euchromatic genome and is accurate to an error rate of ∼1 event per 100,000 bases. Many of the remaining euchromatic gaps are associated with segmental duplications and will require focused work with new methods. The near-complete sequence, the first for a vertebrate, greatly improves the precision of biological analyses of the human genome including studies of gene number, birth and death. Notably, the human enome seems to encode only 20,000-25,000 protein-coding genes. The genome sequence reported here should serve as a firm foundation for biomedical research in the decades ahead

Herbicide Resistance Management: Recent Developments and Trends

This review covers recent developments and trends in herbicide-resistant (HR) weed management in agronomic field crops. In countries where input-intensive agriculture is practiced, these developments and trends over the past decade include renewed efforts by the agrichemical industry in herbicide discovery, cultivation of crops with combined (stacked) HR traits, increasing reliance on preemergence vs. postemergence herbicides, breeding for weed-competitive crop cultivars, expansion of harvest weed seed control practices, and advances in site-specific or precision weed management. The unifying framework or strategy underlying these developments and trends is mitigation of viable weed seeds into the soil seed bank and maintaining low weed seed banks to minimize population proliferation, evolution of resistance to additional herbicidal sites of action, and spread. A key question going forward is: how much weed control is enough to consistently achieve the goal of low weed seed banks? The vision for future HR weed management programs must be sustained crop production and profitability with reduced herbicide (particularly glyphosate) dependency

Detecting Frost Stress in Wheat: A Controlled Environment Hyperspectral Study on Wheat Plant Components and Implications for Multispectral Field Sensing

Radiant frost during the reproductive stage of plant growth can result in considerable wheat (Triticum aestivum L.) yield loss. Much effort has been spent to prevent and manage these losses, including post-frost remote sensing of damage. This study was done under controlled conditions to examine the effect of imposed frost stress on the spectral response of wheat plant components (heads and flag leaves). The approach used hyperspectral profiling to determine whether changes in wheat components were evident immediately after a frost (up to 5 days after frosting (DAF)). Significant differences were found between frost treatments, irrespective of DAF, in the Blue/Green (419&ndash;512 nanometers (nm)), Red (610&ndash;675 nm) and Near Infrared (NIR; 749&ndash;889 nm) regions of the electromagnetic spectrum (EMS) in head spectra, and in the Blue (415&ndash;494 nm), Red (670&ndash;687 nm) and NIR (727&ndash;889 nm) regions in the leaf spectra. Significant differences were found for an interaction between time and frost treatment in the Green (544&ndash;575 nm) and NIR (756&ndash;889 nm) in head spectra, and in the UV (394&ndash;396 nm) and Green/Red (564&ndash;641 nm) in leaf spectra. These findings were compared with spectral and temporal resolutions of commonly used field agricultural multispectral sensors to examine their potential suitability for frost damage studies at the canopy scale, based on the correspondence of their multispectral bands to the results from this laboratory-based hyperspectral study

Assessing the Capability and Potential of LiDAR for Weed Detection

Conventional methods of uniformly spraying fields to combat weeds, requires large herbicide inputs at significant cost with impacts on the environment. More focused weed control methods such as site-specific weed management (SSWM) have become popular but require methods to identify weed locations. Advances in technology allows the potential for automated methods such as drone, but also ground-based sensors for detecting and mapping weeds. In this study, the capability of Light Detection and Ranging (LiDAR) sensors were assessed to detect and locate weeds. For this purpose, two trials were performed using artificial targets (representing weeds) at different heights and diameter to understand the detection limits of a LiDAR. The results showed the detectability of the target at different scanning distances from the LiDAR was directly influenced by the size of the target and its orientation toward the LiDAR. A third trial was performed in a wheat plot where the LiDAR was used to scan different weed species at various heights above the crop canopy, to verify the capacity of the stationary LiDAR to detect weeds in a field situation. The results showed that 100% of weeds in the wheat plot were detected by the LiDAR, based on their height differences with the crop canopy