826 research outputs found
Nonequilibrium electron heating in inter-subband terahertz lasers
Inter-subband laser performance can be critically dependent on the nature of the electron distributions in each subband. In these first Monte Carlo device simulations of optically pumped inter-subband THz lasers, we can see that there are two main causes of electron heating: intersubband decay processes, and inter-subband energy transfer from the "hot" nonequilibrium tails of lower subbands. These processes mean that devices relying on low electron temperatures are disrupted by electron heating, to the extent that slightly populated subbands can have average energies far in excess of the that of either the lattice or other subbands. However, although these heating effects invalidate designs relying on low temperature electron distributions, we see that population inversion is still possible in the high-THz range at 77 K in both stepped and triple-well structures, and that our 11.7 THz triple-well structure even promises inversion at 300 K. © 2002 American Institute of Physics
Stark ladders as tunable far-infrared emitters
A superlattice of GaAs/Ga(1 – x)Al(x)As quantum wells forms a Stark ladder under the influence of a perpendicular electric field. A two level incoherent emitter system, formed by radiative intersubband transitions between adjacent wells, is investigated as a tunable far-infrared radiation source. Intersubband transition rates are calculated at 4, 77, and 300 K for applied fields from 0 to 40 kV cm(–1). It is shown that the quantum efficiency of the radiative emission reaches a maximum at low temperatures for a field of 32 kV cm(–1). Under these conditions the emission wavelength is 38 µm with an estimated power output of 1.1 mW. © 1998 American Institute of Physics
Model of multiple metal electrodeposition in porous electrodes
An electrochemical process is being developed for recovering metals from shredded waste electrical and electronic equipment by leaching and electrowinning. In a membrane-divided electrochemical reactor, chlorine is generated at the anode and used as oxidant in an external leach reactor, in which the metals are dissolved in an acidic chloride solution. As the resulting metal ion concentrations are relatively low, a porous (e.g.,graphite felt) cathode with a large specific surface area and high mass-transport rates is required to achieve acceptable rates and efficiencies of electrodeposition, the counter reaction to the anodic evolution of chlorine. Hence, as a design tool, a mathematical model was developed to predict potential, concentration, current density, and current efficiency distributions for individual metals within the (flow-through) porous cathode, as well as cell voltages and specific electrical energy consumptions of the electrochemical reactor as functions of cathode feeder potential, cathode thickness, porosity, concentrations, and flow rate and direction. To maximize current efficiencies and productivities of the predominant metal, copper, simulations suggest using an initial cathodic feeder electrode potential of -0.5V (standard hydrogen electrode) to metallize the felt, followed by electrodeposition of the bulk of the metal at -0.3V (standard hydrogen electrode), optimal felt thicknesses depending on reactant concentrations. (c) 2006 The Electrochemical Society
Thermodynamic analysis and preliminary design of closed Brayton cycle using nitrogen as working fluid and coupled to small modular Sodium-cooled fast reactor (SM-SFR)
© 2017Sodium-cooled fast reactor (SFR) is considered the most promising of the Generation IV reactors for their near-term demonstration of power generation. Small modular SFRs (SM-SFRs) have less investment risk, can be deployed more quickly, are easier to operate and are more flexible in comparison to large nuclear reactor. Currently, SFRs use the proven Rankine steam cycle as the power conversion system. However, a key challenge is to prevent dangerous sodium-water reaction that could happen in SFR coupled to steam cycle. Nitrogen gas is inert and does not react with sodium. Hence, intercooled closed Brayton cycle (CBC) using nitrogen as working fluid and with a single shaft configuration has been one common power conversion system option for possible near-term demonstration of SFR. In this work, a new two shaft nitrogen CBC with parallel turbines was proposed to further simplify the design of the turbomachinery and reduce turbomachinery size without compromising the cycle efficiency. Furthermore, thermodynamic performance analysis and preliminary design of components were carried out in comparison with a reference single shaft nitrogen cycle. Mathematical models in Matlab were developed for steady state thermodynamic analysis of the cycles and for preliminary design of the heat exchangers, turbines and compressors. Studies were performed to investigate the impact of the recuperator minimum terminal temperature difference (TTD) on the overall cycle efficiency and recuperator size. The effect of turbomachinery efficiencies on the overall cycle efficiency was examined. The results showed that the cycle efficiency of the proposed configuration was comparable to the 39.44% efficiency of the reference cycle. In addition, the study indicated that the new configuration has the potential to simplify the design of turbomachinery, reduce the size of turbomachinery and provide opportunity for improving the efficiency of the turbomachinery. The findings so far revealed that the proposed two-shaft CBC with nitrogen as working fluid could be a promising power conversion system for SM-SFRs near-term demonstration
Life cycle assessment of recycling options for automotive Li-ion battery packs
Ramping up automotive lithium-ion battery (LIB) production volumes creates an imperative need for the establishment of end-of-life treatment chains for spent automotive traction battery packs. Life Cycle Assessment (LCA) is an essential tool in evaluating the environmental performance of such chains and options. This work synthesises publicly-available data to expand upon previously reported LCA studies for LIB recycling and holistically model end-of-life treatment chains for spent automotive traction battery packs with lithium nickel cobalt manganese oxide positive electrodes. The study provides an in-depth analysis of unit process contributions to the environmental benefits and burdens of battery recycling options and integrates these with the battery production impacts to estimate the net environmental benefit achieved by the introduction of recycling in the value chain. The attributional LCA model accounts for the whole recycling chain, from the point of end-of-life LIB collection to the provision of secondary materials for battery manufacturing. Pyrometallurgical processing of spent automotive traction battery cells is predicted to have a larger Global Warming Potential (GWP), due to its higher energy intensity, while hydrometallurgical processing is shown to be more environmentally beneficial, due to the additional recovery of lithium as hydroxide. The majority of the environmental benefits arise from the recovery of aluminium and copper fractions of battery packs, with important contributions also arising from the recovery of nickel and cobalt from the battery cells. Overall, the LCA model presented estimates a net benefit in 11 out of 13 environmental impact categories based on the ReCiPe characterisation method, as compared to battery production without recycling. An investigation of the effect of geographic specificity on the combined production and recycling indicates that it is as a key source of GWP impact variability and that the more climate burdening chains offer a significantly higher potential for GWP reductions through battery recycling. The sensitivity analysis carried out shows that impacts related to air quality are higher when recovering lower grade materials. This study provides a quantitative and replicable inventory model which highlights the significance of the environmental benefits achieved through the establishment of circular automotive battery value chains
En route to a unified model for photo-electrochemical reactor optimization. I - Photocurrent and H₂ yield predictions
A semi-empirical model was developed for prediction of photocurrent densities and implemented to predict the performance of a photo-electrochemical reactor for water splitting in alkaline solutions, using Sn-doped α-Fe₂O₃ photo-anodes produced by spray pyrolysis. Photo-anodes annealed at different temperatures were characterized using photo-electrochemical impedance spectroscopy, cyclic voltammetry in the presence and absence of a hole scavenger and also the open circuit potential under high intensity illumination. Mott-Schottky analysis was used cautiously to estimate charge carrier concentration and the flat band potential. In addition to overpotential/current distribution and ohmic potential losses, the model also accounts for absorbed photon flux, surface and bulk electron-hole recombination rates, gas desorption, bubble formation and (H₂-O₂) cross-over losses. This allows the model to estimate the total yield of hydrogen, charge and gas collection efficiencies. A methodology is presented here in order to evaluate parameters required to assess the performance of a photo-electrochemical reactor in 1D and 2D geometries. The importance of taking into account bubble generation and gas desorption is discussed, together with the difficulties of measuring charge carrier concentration and electron-hole recombination in the bulk of the semiconductor, which are of major importance in the prediction of photocurrent densities
Si/SiGe bound-to-continuum quantum cascade emitters
Si/SiGe bound-to-continuum quantum cascade emitters designed
by self-consistent 6-band k.p modeling and grown by low energy
plasma enhanced chemical vapour deposition are presented
demonstrating electroluminescence between 1.5 and 3 THz. The
electroluminescence is Stark shifted by an electric field and
demonstrates polarized emission consistent with the design.
Transmission electron microscopy and x-ray diffraction are also
presented to characterize the thick heterolayer structure
Comparison of the COBE FIRAS and DIRBE Calibrations
We compare the independent FIRAS and DIRBE observations from the COBE in the
wavelength range 100-300 microns. This cross calibration provides checks of
both data sets. The results show that the data sets are consistent within the
estimated gain and offset uncertainties of the two instruments. They show the
possibility of improving the gain and offset determination of DIRBE at 140 and
240 microns.Comment: Accepted for publication in the Astrophysical Journal 11 pages, plus
3 figures in separate postscript files. Figure 3 has three part
Ge-on-Si single-photon avalanche diode detectors: design, modeling, fabrication, and characterization at wavelengths 1310 and 1550 nm
The design, modeling, fabrication, and characterization of single-photon avalanche diode detectors with an epitaxial Ge absorption region grown directly on Si are presented. At 100 K, a single-photon detection efficiency of 4% at 1310 nm wavelength was measured with a dark count rate of ~ 6 megacounts/s, resulting in the lowest reported noise-equivalent power for a Ge-on-Si single-photon avalanche diode detector (1×10-14 WHz-1/2). The first report of 1550 nm wavelength detection efficiency measurements with such a device is presented. A jitter of 300 ps was measured, and preliminary tests on after-pulsing showed only a small increase (a factor of 2) in the normalized dark count rate when the gating frequency was increased from 1 kHz to 1 MHz. These initial results suggest that optimized devices integrated on Si substrates could potentially provide performance comparable to or better than that of many commercially available discrete technologies
- …