Digital control of magnetic bearings supporting a multimass flexible rotor

The characteristics of magnetic bearings used to support a three mass flexible rotor operated at speeds up to 14,000 RPM are discussed. The magnetic components of the bearing are of a type reported in the literature previously, but the earlier analog controls were replaced by digital ones. Analog-to-digital and digital-to-analog converters and digital control software were installed in an AT&T PC. This PC-based digital controller was used to operate one of the magnetic bearings on the test rig. Basic proportional-derivative control was applied to the bearings, and the bearing stiffness and damping characteristics were evaluated. Particular attention is paid to the frequency dependent behavior of the stiffness and damping properties, and comparisons are made between the actual controllers and ideal proportional-derivative control

ISS Solar Array Management

The International Space Station (ISS) Solar Array Management (SAM) software toolset provides the capabilities necessary to operate a spacecraft with complex solar array constraints. It monitors spacecraft telemetry and provides interpretations of solar array constraint data in an intuitive manner. The toolset provides extensive situational awareness to ensure mission success by analyzing power generation needs, array motion constraints, and structural loading situations. The software suite consists of several components including samCS (constraint set selector), samShadyTimers (array shadowing timers), samWin (visualization GUI), samLock (array motion constraint computation), and samJet (attitude control system configuration selector). It provides high availability and uptime for extended and continuous mission support. It is able to support two-degrees-of-freedom (DOF) array positioning and supports up to ten simultaneous constraints with intuitive 1D and 2D decision support visualizations of constraint data. Display synchronization is enabled across a networked control center and multiple methods for constraint data interpolation are supported. Use of this software toolset increases flight safety, reduces mission support effort, optimizes solar array operation for achieving mission goals, and has run for weeks at a time without issues. The SAM toolset is currently used in ISS real-time mission operations

Response of Metallic Pyramidal Lattice Core Sandwich Panels to High Intensity Impulsive Loading in Air

Small scale explosive loading of sandwich panels with low relative density pyramidal lattice cores has been used to study the large scale bending and fracture response of a model sandwich panel system in which the core has little stretch resistance. The panels were made from a ductile stainless steel and the practical consequence of reducing the sandwich panel face sheet thickness to induce a recently predicted beneficial fluid–structure interaction (FSI) effect was investigated. The panel responses are compared to those of monolithic solid plates of equivalent areal density. The impulse imparted to the panels was varied from 1.5 to 7.6 kPa s by changing the standoff distance between the center of a spherical explosive charge and the front face of the panels. A decoupled finite element model has been used to computationally investigate the dynamic response of the panels. It predicts panel deformations well and is used to identify the deformation time sequence and the face sheet and core failure mechanisms. The study shows that efforts to use thin face sheets to exploit FSI benefits are constrained by dynamic fracture of the front face and that this failure mode is in part a consequence of the high strength of the inertially stabilized trusses. Even though the pyramidal lattice core offers little in-plane stretch resistance, and the FSI effect is negligible during loading by air, the sandwich panels are found to suffer slightly smaller back face deflections and transmit smaller vertical component forces to the supports compared to equivalent monolithic plates.Engineering and Applied Science

Training Load, Injury Burden, and Team Success in Professional Rugby Union:Risk Versus Reward

CONTEXT: Individual and team injury burden and performance are 2 key considerations facing practitioners in the daily prescription of an athlete's training load. Whereas a considerable number of researchers have examined univariate relationships between training load and performance, training load and injury, or injury and performance, few investigators have examined all 3 concurrently. OBJECTIVE: To assess the association among training load, injury burden, and performance in professional rugby union. DESIGN: Descriptive epidemiology study. SETTING: The English Premiership competition. PATIENTS OR OTHER PARTICIPANTS: Individual injury and training load data, as well as team performance data, were captured during the 2015–2016 (n = 433 players) and 2016–2017 (n = 569 players) seasons. MAIN OUTCOME MEASURE(S): Data were aggregated into team average scores for each week, including weekly (acute) load, smoothed chronic load, changes in load, injury burden, and weekly performance. Linear mixed modelling techniques were used to assess the association among measures. RESULTS: Injury burden was negatively associated with performance, with a high weekly burden associated with a likely harmful (P = .01) decrease in performance. Training load measures displayed only trivial associations with performance. Only the acute:chronic workload ratio measure was clearly associated with injury burden, with a possibly harmful effect (P = .02). Both squad size and player availability were associated with only trivial changes in performance. CONCLUSIONS: Whereas no association between average training load and performance existed, associations between training load and injury burden and between injury burden and performance were clear. Further investigation using more sensitive and individualized measures of load, performance, and injury may elicit a clearer relationship and should be considered for future work

'Choosing shoes': a preliminary study into the challenges facing clinicians in assessing footwear for rheumatoid patients

Background: Footwear has been accepted as a therapeutic intervention for the foot affected by rheumatoid arthritis (RA). Evidence relating to the objective assessment of footwear in patients with RA is limited. The aims of this study were to identify current footwear styles, footwear characteristics, and factors that influence footwear choice experienced by patients with RA. Methods: Eighty patients with RA were recruited from rheumatology clinics during the summer months. Clinical characteristics, global function, and foot impairment and disability measures were recorded. Current footwear, footwear characteristics and the factors associated with choice of footwear were identified. Suitability of footwear was recorded using pre-determined criteria for assessing footwear type, based on a previous study of foot pain. Results: The patients had longstanding RA with moderate-to severe disability and impairment. The foot and ankle assessment demonstrated a low-arch profile with both forefoot and rearfoot structural deformities. Over 50% of shoes worn by patients were opentype footwear. More than 70% of patients’ footwear was defined as being poor. Poor footwear characteristics such as heel rigidity and sole hardness were observed. Patients reported comfort (17%) and fit (14%) as important factors in choosing their own footwear. Only five percent (5%) of patients wore therapeutic footwear. Conclusions: The majority of patients with RA wear footwear that has been previously described as poor. Future work needs to aim to define and justify the specific features of footwear that may be of benefit to foot health for people with RA

An evaluation of seasonal variations in footwear worn by adults with inflammatory arthritis: a cross-sectional observational study using a web-based survey

Background: Foot problems are common in adults with inflammatory arthritis and therapeutic footwear can be effective in managing arthritic foot problems. Accessing appropriate footwear has been identified as a major barrier, resulting in poor adherence to treatment plans involving footwear. Indeed, previous New Zealand based studies found that many people with rheumatoid arthritis and gout wore inappropriate footwear. However, these studies were conducted in a single teaching hospital during the New Zealand summer therefore the findings may not be representative of footwear styles worn elsewhere in New Zealand, or reflect the potential influence of seasonal climate changes. The aim of the study was to evaluate seasonal variations in footwear habits of people with inflammatory arthritic conditions in New Zealand. Methods: A cross-sectional study design using a web-based survey. The survey questions were designed to elicit demographic and clinical information, features of importance when choosing footwear and seasonal footwear habits, including questions related to the provision of therapeutic footwear/orthoses and footwear experiences. Results: One-hundred and ninety-seven participants responded who were predominantly women of European descent, aged between 46–65 years old, from the North Island of New Zealand. The majority of participants identified with having either rheumatoid arthritis (35%) and/or osteoarthritis (57%) and 68% reported established disease (>5 years duration). 18% of participants had been issued with therapeutic footwear. Walking and athletic shoes were the most frequently reported footwear type worn regardless of the time of year. In the summer, 42% reported wearing sandals most often. Comfort, fit and support were reported most frequently as the footwear features of greatest importance. Many participants reported difficulties with footwear (63%), getting hot feet in the summer (63%) and the need for a sandal which could accommodate a supportive insole (73%). Conclusions: Athletic and walking shoes were the most popular style of footwear reported regardless of seasonal variation. During the summer season people with inflammatory arthritis may wear sandals more frequently in order to accommodate disease-related foot deformity. Healthcare professionals and researchers should consider seasonal variation when recommending appropriate footwear, or conducting footwear studies in people with inflammatory arthritis, to reduce non-adherence to prescribed footwear

Impedance spectroscopy characterization of neutron irradiated thermoelectric modules for space nuclear power

The European Space Agency is currently supporting the research and development of advanced radioisotope power systems utilising thermoelectric modules. The performance of thermoelectric modules following exposure to neutron radiation is of significant interest due to the likely application of radioisotope thermoelectric generators in deep space exploration or planetary landers requiring prolonged periods of operation. This study utilises impedance spectroscopy to characterise the effects of neutron irradiation on the performance of complete thermoelectric modules, as opposed to standalone material. For a 50 We americium-241 radioisotope thermoelectric generator design, it is estimated that the TE modules could be exposed to a total integrated flux of approximately 5 × 1013 neutrons cm-2 (>1 MeV). In this study, an equivalent neutron dose was simulated experimentally via an acute 2-hour exposure in a research pool reactor. Bi2Te3-based thermoelectric modules with different leg aspect ratios and microstructures were investigated. Gamma-ray spectroscopy was initially used to identify activated radionuclides and hence quantify irradiation induced transmutation doping. To evaluate the thermoelectric properties pre- and post-irradiation, impedance spectroscopy characterization was employed. Isochronal thermal annealing of defects imparted by the irradiation process, revealed that polycrystalline based modules required significantly higher temperature than those with a monolithic microstructure. Whilst this may indicate a greater susceptibility to neutron irradiation, all tested modules demonstrated sufficient radiation hardness for use within an americium-241 radioisotope thermoelectric generator. Furthermore, the work reported demonstrates that impedance spectroscopy is a highly capably diagnostic tool for characterising the in-service degradation of complete thermoelectric devices

Juror Perceptions of Trial Testimony as a Function of the Method of Presentation: A Comparison of Live, Color Video, Black-and-White Video, Audio, and Transcript Presentations

Summary of Contents I. Introduction A. Uses of videotape in the litigation process 1. Prelitigation videotape uses 2. Videotaped depositions 3. Electronic trial records 4. Electronic presentation of evidence B. A review of the research literature II. The Research Design: Rationale and Description A. The need to assess the impact of videotape in the litigation process B. The live trial as a standard of comparison C. Description of the research design 1. The stimulus trial 2. The trial participants 3. The physical setting 4. A description of the different trial procedures 5. The questionnaire III. Research Results A. Juror perceptions of the trial participants as rated on the bipolar adjective scales 1. Competency 2. Honesty 3. Friendliness 4. Appearance 5. Objectivity 6. Additional adjective pairs B. The amount of compensation awarded the landowner C. The relationship of the dollar awards to juror ratings of trial participants D. Juror preferences for the trial participants E. Juror reactions to the trials IV. Discussion of the Results A. Comparative merits of deposition presentation methods 1. Read transcript 2. Audiotape 3. Black-and-white videotape 4. Color videotape 5. Conclusion B. An evaluation of the use of videotape to present all testimony at trial C. Recommendations for future researc

Juror Perceptions of Trial Testimony as a Function of the Method of Presentation: A Comparison of Live, Color Video, Black-and-White Video, Audio, and Transcript Presentations

Summary of Contents I. Introduction A. Uses of videotape in the litigation process 1. Prelitigation videotape uses 2. Videotaped depositions 3. Electronic trial records 4. Electronic presentation of evidence B. A review of the research literature II. The Research Design: Rationale and Description A. The need to assess the impact of videotape in the litigation process B. The live trial as a standard of comparison C. Description of the research design 1. The stimulus trial 2. The trial participants 3. The physical setting 4. A description of the different trial procedures 5. The questionnaire III. Research Results A. Juror perceptions of the trial participants as rated on the bipolar adjective scales 1. Competency 2. Honesty 3. Friendliness 4. Appearance 5. Objectivity 6. Additional adjective pairs B. The amount of compensation awarded the landowner C. The relationship of the dollar awards to juror ratings of trial participants D. Juror preferences for the trial participants E. Juror reactions to the trials IV. Discussion of the Results A. Comparative merits of deposition presentation methods 1. Read transcript 2. Audiotape 3. Black-and-white videotape 4. Color videotape 5. Conclusion B. An evaluation of the use of videotape to present all testimony at trial C. Recommendations for future researc