50 research outputs found
An Evaluation of Electromagnetic Exposure While Using Ultra-High Frequency Radiofrequency Identification (UHF RFID) Guns
The aim is to evaluate specific absorption rate (SAR) values from exposure near handheld ultra-high frequency radiofrequency identification readers (UHF RFID guns-small electronic devices, or even portable computers with relevant accessories-emitting up to several watts of electromagnetic field (EMF) to search for RFID sensors (tags) attached to marked objects), in order to test the hypothesis that they have an insignificant environmental influence. Simulations of SAR in adult male and female models in seven exposure scenarios (gun near the head, arm, chest, hip/thigh of the operator searching for tags, or near to the chest and arm of the scanned person or a bystander). The results showed EMF exposure compliant with SAR limits for general public exposure (ICNIRP/European Recommendation 1999/519/EC) at emissions up to 1 W (reading range 3.5-11 m, depending on tag sensitivity). In the worst-case scenario, guns with a reading range exceeding 5 m (>2 W emission) may cause an SAR exceeding the general public limits in the palm of the user and the torso of the user, a bystander, or a scanned person; occupational exposure limits may be exceeded when emission >5 W. Users of electronic medical implants and pregnant women should be treated as individuals at particular risk in close proximity to guns, even at emissions of 1 W. Only UHF RFID guns emitting below 1 W may be considered as environmentally insignificant EMF sources.Results of a research task (II.N.18) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2017–2019—within the scope of research and development—by the Ministry of Science and Higher Education/National Centre for Research and Development (Central Institute for Labour Protection—National Research Institute was the Programme’s main co-ordinator) and by the project ‘Electromagnetic Characterisation in Smart Environments of Healthcare and their involvement in Personnel. Occupational and Environmental Health’ (PI14CIII/00056) funding from Sub-Directorate-General for Research Assessment and Promotion in Spain (Instituto de Salud Carlos III).S
Modelling and Evaluation of the Absorption of the 866 MHz Electromagnetic Field in Humans Exposed near to Fixed I-RFID Readers Used in Medical RTLS or to Monitor PPE
The aim of this study was to model and evaluate the Specific Energy Absorption Rate (SAR) values in humans in proximity to fixed multi-antenna I-RFID readers of passive tags under various scenarios mimicking exposure when they are incorporated in Real-Time Location Systems (RTLS), or used to monitor Personal Protective Equipment (PPE). The sources of the electromagnetic field (EMF) in the modelled readers were rectangular microstrip antennas at a resonance frequency in free space of 866 MHz from the ultra-high frequency (UHF) RFID frequency range of 865-868 MHz. The obtained results of numerical modelling showed that the SAR values in the body 5 cm away from the UHF RFID readers need consideration with respect to exposure limits set by international guidelines to prevent adverse thermal effects of exposure to EMF: when the effective radiated power exceeds 5.5 W with respect to the general public/unrestricted environments exposure limits, and with respect to occupational/restricted environments exposure limits, when the effective radiated power exceeds 27.5 W.Results of a research tasks (II.PB.15, II.N.19) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2017–2019 and 2020–2022—within the scope of research and development—by the Ministry of Science and Higher Education/National Centre for Research and Development (Central Institute for Labour Protection—National Research Institute was the Programme’s main co-ordinator); grant ‘Architecture for Scalable, Self-human-centric, Intelligent, Secure, and Tactile next generation IoT’ (957258–ASSIST-IoT) funding from the European’s Union Horizon 2020 research innovation programme and the project ‘Electromagnetic Characterisation in Smart Environments of Healthcare and their involvement in Personnel. Occupational and Environmental Health’ (PI14CIII/00056) funding from Sub-Directorate-General for Research Assessment and Promotion in Spain (Instituto de Salud Carlos III).S
MEASUREMENT AND ASSESSMENT OF ELECTROMAGNETIC FIELDS NEAR RADIOPHONES IN LINE WITH PROVISIONS OF EUROPEAN DIRECTIVE 2013/35/EU AND POLISH LABOUR LAW
Background: The activities of rescue and uniformed services require the use of wireless communication devices, such as portable radiophones. Assessment of workers' exposure to electromagnetic fields emitted by radiophones is important in view of occupational safety and health (OSH), legislation requirements and reports on possible adverse health effects in users of devices emitting radiofrequency electromagnetic field. Materials and Methods: In this study 50 portable radiophones of conventional and trunked communication systems were investigated. The assessment of electromagnetic hazards to users involved unperturbed electromagnetic field measurements near radiophones' antennas. Results: The electric field strength corresponding to the occupational exposure level (fields of so-called safety zones established by OSH legislation in Poland) was measured at a distance of 45-65 cm from the portable radiophones antennas of conventional system and 75-95 cm from antennas of trunked system radiophones, depending on their type and mode of work. The assessment was based on the averaged results of series of measurements. The electric field strength exceeding action levels defined by Directive 2013/35/EU was found up to 15 cm from radiophone antennas of conventional system and up to 10 cm from the antennas of trunked system radiophones. Conclusions: Taking into account the range of safety zones and the use of portable radiophones near the body, their users should be classified into the group of workers occupationally exposed to electromagnetic fields. Electromagnetic field measurement results and typical conditions of using portable radiophones justify theneed for additional assessment of electromagnetic hazards - the analysis of compliance with relevant exposure limit values provided by Directive 2013/35/EU. Med Pr 2013;64(5):671–68
Modelling the Influence of the 2.4 GHz Electromagnetic Field on the User of a Wearable Internet of Things (IoT) Device for Monitoring Hazards in the Work Environment
The aim was to test the hypothesis that there is an insignificant influence on humans from the absorption of an 2.4 GHz electromagnetic field (EMF) emitted by wearable Internet of Things (IoT) devices (using Meandered Inverted-F Antenna (MIFA) for Wi-Fi and Bluetooth technologies) for monitoring hazards in the work environment. To quantify problem, the specific energy absorption rate (SAR) was calculated in a multi-layer ellipsoidal model of the IoT device user’s head exposed to EMF from MIFA attached to a headband or to a helmet. SAR values may be significant when a modelled IoT wearable device is attached to a headband, but not to a helmet.Results of a research tasks (II.PB.15, 2.G.04, 2.G.05) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2017–2022—within the scope of research and development—by the Ministry of Science and Higher Education/National Centre for Research and Development and within the scope of state services—by the Ministry of Family, Labour, and Social Policy (CIOPPIB is the Programme’s main co-ordinator) and the project ‘Electromagnetic Characterization in Smart Environments of Healthcare and their involvement in Personnel. Occupational and Environmental Health’ (PI14CIII/00056) funding from Sub-Directorate-General for Research Assessment and Promotion in Spain (Instituto de Salud Carlos III) and as part of the research activity of the Warsaw University of Technology.S
Electromagnetic Assessment of UHF-RFID Devices in Healthcare Environment
In this work, the evaluation of electromagnetic effect of Ultra High Frequency Radio Frequency Identification (UHF-RFID) passive tags used in the healthcare environment is presented. In order to evaluate exposure levels caused by EM field (865–868 MHz) of UHF-RFID readers, EM measurements in an anechoic chamber and in a real medical environment (Hospital Universitario de Canarias), as well as simulations by 3D Ray Launching algorithm, and of biophysical exposure effects in human models are presented. The results obtained show that the EM exposure is localized, in close vicinity of RFID reader and inversely proportional to its reading range. The EM exposure levels detected are sufficient to cause EM immunity effects in electronic devices (malfunctions in medical equipment or implants). Moreover, more than negligible direct effects in humans (exceeding relevant SAR values) were found only next to the reader, up to approximately 30% of the reading range. As a consequence, the EM risk could be firstly evaluated based on RFID parameters, but should include an in situ exposure assessment. It requires attention and additional studies, as increased applications of monitoring systems are observed in the healthcare sector—specifically when any system is located close to the workplace that is permanently occupied.This work was supported by Instituto de Salud Carlos III project “Electromagnetic “Characterization in Smart Environments of Healthcare, and their involvement in Personal, Occupational, and Environmental Health” (PI14CIII/00056) https://portalfis.isciii.es/es/Paginas/DetalleProyecto. aspx?idProyecto=PI14CIII%2f00056 (accessed on 24 July 2022), and project “ (PI19CIII/00033) TMPY 508/19 “ Metrics development for electromagnetic safety assessment in healthcare centers in the context of 5G“ https://portalfis.isciii.es/es/Paginas/DetalleProyecto.aspx?idProyecto=PI19 CIII%2f00033, (accessed on 24 July 2022) from Sub-Directorate-General for Research Assessment and Promotion. The results of a research task (II.PB.15) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2020-2022-within the scope of research and development-by the National Centre for Research and Development were also included.S
Electromagnetic assessment of UHF-RFID devices in healthcare environment
In this work, the evaluation of electromagnetic effect of Ultra High Frequency Radio Frequency Identification (UHF-RFID) passive tags used in the healthcare environment is presented. In order to evaluate exposure levels caused by EM field (865–868 MHz) of UHF-RFID readers, EM measurements in an anechoic chamber and in a real medical environment (Hospital Universitario de Canarias), as well as simulations by 3D Ray Launching algorithm, and of biophysical exposure effects in human models are presented. The results obtained show that the EM exposure is localized, in close vicinity of RFID reader and inversely proportional to its reading range. The EM exposure levels detected are sufficient to cause EM immunity effects in electronic devices (malfunctions in medical equipment or implants). Moreover, more than negligible direct effects in humans (exceeding relevant SAR values) were found only next to the reader, up to approximately 30% of the reading range. As a consequence, the EM risk could be firstly evaluated based on RFID parameters, but should include an in situ exposure assessment. It requires attention and additional studies, as increased applications of monitoring systems are observed in the healthcare sector—specifically when any system is located close to the workplace that is permanently occupied.This work was supported by Instituto de Salud Carlos III project “Electromagnetic Characterization in Smart Environments of Healthcare, and their involvement in Personal, Occupational, and Environmental Health” (PI14CIII/00056), and project (PI19CIII/00033) TMPY 508/19 “Metrics development for electromagnetic safety assessment in healthcare centers in the context of 5G“ from Sub-Directorate-General for Research Assessment and Promotion. The results of a research task (II.PB.15) carried out within the National Programme “Improvement of safety and working conditions” partly supported in Poland in 2020–2022—within the scope of research and development—by the National Centre for Research and Development were also included
Protecting against electromagnetic hazards in the context of new international references
Wymagania prawne dotyczące ochrony przed zagrożeniami elektromagnetycznymi ewoluują wraz z rozwojem technologii powodujących emisję pola elektromagnetycznego do środowiska pracy oraz wiedzy naukowej o mechanizmach jego oddziaływania na ludzi i inne obiekty materialne, a także związanych z nim zagrożeniach bezpieczeństwa i zdrowia. Punktem odniesienia dla wielu dokumentów prawnych stały się w Europie zalecenia opracowane przez International Commission on Non-Ionizing Radiation Protection (ICNIRP). W artykule scharakteryzowano genezę tych zaleceń na tle polskich i międzynarodowych (IEEE, INIRC) doświadczeń praktycznych w zakresie ochrony pracowników przed zagrożeniami elektromagnetycznymi oraz użyteczność dla systemowego zapewniania bezpiecznych i higienicznych warunków pracy najnowszych zaleceń ICNIRP (2020), dotyczących ochrony przed skutkami oddziaływania pola elektromagnetycznego o częstotliwości przekraczającej 100 kHz.The legal requirements for protection against electromagnetic hazards are developing along with the development of technologies that cause the emission of electromagnetic field into the work environment and scientific knowledge about the mechanisms of its impact on people and other material objects and the related safety and health hazards. Recommendations developed by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) have become the point of reference for many legal documents in Europe. This article characterizes the origin of these recommendations against the background of Polish and international (IEEE, INIRC) practical experience in the protection of workers against electromagnetic hazards and the usefulness of the latest ICNIRP (2020) recommendations regarding protection against the effects of electromagnetic field with a frequency exceeding 100 kHz for applications in the field of occupational health and safety
Experimental evaluation of ballistic hazards in imaging diagnostic center
Background: Serious hazards for human health and life and devices in close proximity to the magnetic resonance scanners (MRI scanners) include the effects of being hit by ferromagnetic objects attracted by static magnetic field (SMF) produced by scanner magnet - the so-called ballistic hazards classified among indirect electromagnetic hazards. International safety guidelines and technical literature specify different SMF threshold values regarding ballistic hazards - e.g. 3 mT (directive 2004/40/EC, EN 60601-2-33), and 30 mT (BMAS 2009, directive proposal 2011). Investigations presented in this article were performed in order to experimentally verify SMF threshold for ballistic hazards near MRI scanners used in Poland. Material/Methods: Investigations were performed with the use of a laboratory source of SMF (0-30 mT) and MRI scanners of various types. The levels of SMF in which metal objects of various shapes and 0.4-500 g mass are moved by the field influence were investigated. The distance from the MRI scanners (0.2-3T) where hazards may occur were also investigated. Results: Objects investigated under laboratory conditions were moved by SMF of 2.2-15 mT magnetic flux density when they were freely suspended, but were moved by the SMF of 5.6-22 mT when they were placed on a smooth surface. Investigated objects were moved in fields of 3.5-40 mT by MRI scanners. Distances from scanner magnet cover, where ballistic hazards might occur are: up to 0.5 m for 0.2-0.3T scanners; up to 1.3 m for 0.5T scanners; up to 2.0 m for 1.5T scanners and up to 2.5 m for 3T scanners (at the front and back of the magnet). Conclusions: It was shown that SMF of 3 mT magnetic flux density should be taken as the threshold for ballistic hazards. Such level is compatible with SMF limit value regarding occupational safety and health-protected areas/zones, where according to the Polish labor law the procedures of work environment inspection and prevention measures regarding indirect electromagnetic hazards should be applied. Presented results do not support the increase up to 30 mT of the SMF limit for protected area
An Assessment of Hazards Caused by Electromagnetic Interaction on Humans Present near Short-Wave Physiotherapeutic Devices of Various Types Including Hazards for Users of Electronic Active Implantable Medical Devices (AIMD)
Leakage of electromagnetic fields (EMF) from short-wave radiofrequency physiotherapeutic diathermies (SWDs) may cause health and safety hazards affecting unintentionally exposed workers (W) or general public (GP) members (assisting patient exposed during treatment or presenting there for other reasons). Increasing use of electronic active implantable medical devices (AIMDs), by patients, attendants, and workers, needs attention because dysfunctions of these devices may be caused by electromagnetic interactions. EMF emitted by 12 SWDs (with capacitive or inductive applicators) were assessed following international guidelines on protection against EMF exposure (International Commission on Nonionizing Radiation Protection for GP and W, new European directive 2013/35/EU for W, European Recommendation for GP, and European Standard EN 50527-1 for AIMD users). Direct EMF hazards for humans near inductive applicators were identified at a distance not exceeding 45 cm for W or 62 cm for GP, but for AIMD users up to 90 cm (twice longer than that for W and 50% longer than that for GP because EMF is pulsed modulated). Near capacitive applicators emitting continuous wave, the corresponding distances were: 120 cm for W or 150 cm for both—GP or AIMD users. This assessment does not cover patients who undergo SWD treatment (but it is usually recommended for AIMD users to be careful with EMF treatment)