Performance Characterization of a Solenoid-type Gas Valve for the H−H^{-} Magnetron Source at FNAL

The magnetron-style $H^{-}$ ion sources currently in operation at Fermilab use piezoelectric gas valves to function. This kind of gas valve is sensitive to small changes in ambient temperature, which affect the stability and performance of the ion source. This motivates the need to find an alternative way of feeding H2 gas into the source. A solenoid-type gas valve has been characterized in a dedicated off-line test stand to assess the feasibility of its use in the operational ion sources. $H^{-}$ ion beams have been extracted at 35 keV using this valve. In this study, the performance of the solenoid gas valve has been characterized measuring the beam current output of the magnetron source with respect to the voltage and pulse width of the signal applied to the gas valve.Comment: 4 pp. arXiv admin note: text overlap with arXiv:1701.0175

Ceramic and coating applications in the hostile environment of a high temperature hypersonic wind tunnel

A Mach 7, blowdown wind tunnel was used to investigate aerothermal structural phenomena on large to full scale high speed vehicle components. The high energy test medium, which provided a true temperature simulation of hypersonic flow at 24 to 40 km altitude, was generated by the combustion of methane with air at high pressures. Since the wind tunnel, as well as the models, must be protected from thermally induced damage, ceramics and coatings were used extensively. Coatings were used both to protect various wind tunnel components and to improve the quality of the test stream. Planned modifications for the wind tunnel included more extensive use of ceramics in order to minimize the number of active cooling systems and thus minimize the inherent operational unreliability and cost that accompanies such systems. Use of nonintrusive data acquisition techniques, such as infrared radiometry, allowed more widespread use of ceramics for models to be tested in high energy wind tunnels

Implementation of Design Changes Towards a More Reliable, Hands-off Magnetron Ion Source

As the main $H^{-}$ ion source for the accelerator complex, magnetron ion sources have been used at Fermilab since the 1970s. At the offline test stand, new R&D is carried out to develop and upgrade the present magnetron-type sources of $H^{-}$ ions of up to 80 mA and 35 keV beam energy in the context of the Proton Improvement Plan. The aim of this plan is to provide high-power proton beams for the experiments at FNAL. In order to reduce the amount of tuning and monitoring of these ion sources, a new electronic system consisting of a current-regulated arc discharge modulator allow the ion source to run at a constant arc current for improved beam output and operation. A solenoid-type gas valve feeds $H_{2}$ gas into the source precisely and independently of ambient temperature. This summary will cover several studies and design changes that have been tested and will eventually be implemented on the operational magnetron sources at Fermilab. Innovative results for this type of ion source include cathode geometries, solenoid gas valves, current controlled arc pulser, cesium boiler redesign, gas mixtures of hydrogen and nitrogen, and duty factor reduction, with the aim to improve source lifetime, stability, and reducing the amount of tuning needed. In this summary, I will highlight the advances made in ion sources at Fermilab and will outline the directions of the continuing R&D effort.Comment: 4 pp. arXiv admin note: substantial text overlap with arXiv:1701.0175

Improvements on the Stability and Operation of a Magnetron H- Ion Source

The magnetron H- ion sources developed in the 1970s currently in operation at Fermilab provide beam to the rest of the accelerator complex. A series of modifications to these sources have been tested in a dedicated offline test stand with the aim of improving different operational issues. The solenoid type gas valve was tested as an alternative to the piezoelectric gas valve in order to avoid its temperature dependence. A new cesium oven was designed and tested in order to avoid glass pieces that were present with the previous oven, improve thermal insulation and fine tune its temperature. A current-regulated arc modulator was developed to run the ion source at a constant arc current, providing very stable beam outputs during operations. In order to reduce beam noise, the addition of small amounts of N2 gas was explored, as well as testing different cathode shapes with increasing plasma volume. This paper summarizes the studies and modifications done in the source over the last three years with the aim of improving its stability, reliability and overall performance.Comment: 8 pages, 19 figure

Techniques for aerothermal tests of large, flightweight thermal protection panels in a Mach 7 wind tunnel

Thermal performance and structural integrity are experimentally evaluated in the Langley 8-ft high temperature structures tunnel, which uses a combustion products test medium to provide realistic combinations of aerodynamic heating and loading. Recently developed techniques provide independent control of rate and magnitude of surface heating and differential pressure, protection against adverse acoustics buffeting during facility starting and stopping, programed radiant heating before exposing test panels to the high energy stream, and infrared radiometry for detailed surface temperatures. These techniques were verified repeatedly by return of useful data on metallic and nonmetallic panel concepts of reusable surface insulation

Recent Operation of the FNAL Magnetron H−H^{-} Ion Source

This paper will detail changes in the operational paradigm of the Fermi National Accelerator Laboratory (FNAL) magnetron $H^{-}$ ion source due to upgrades in the accelerator system. Prior to November of 2012 the $H^{-}$ ions for High Energy Physics (HEP) experiments were extracted at ~18 keV vertically downward into a 90 degree bending magnet and accelerated through a Cockcroft-Walton accelerating column to 750 keV. Following the upgrade in the fall of 2012 the $H^{-}$ ions are now directly extracted from a magnetron at 35 keV and accelerated to 750 keV by a Radio Frequency Quadrupole (RFQ). This change in extraction energy as well as the orientation of the ion source required not only a redesign of the ion source, but an updated understanding of its operation at these new values. Discussed in detail are the changes to the ion source timing, arc discharge current, hydrogen gas pressure, and cesium delivery system that were needed to maintain consistent operation at >99% uptime for HEP, with an increased ion source lifetime of over 9 months.Comment: 8 p

Alternative outlets for sustaining photosynthetic electron transport during dark-to-light transitions.

Environmental stresses dramatically impact the balance between the production of photosynthetically derived energetic electrons and Calvin-Benson-Bassham cycle (CBBC) activity; an imbalance promotes accumulation of reactive oxygen species and causes cell damage. Hence, photosynthetic organisms have developed several strategies to route electrons toward alternative outlets that allow for storage or harmless dissipation of their energy. In this work, we explore the activities of three essential outlets associated with Chlamydomonas reinhardtii photosynthetic electron transport: (i) reduction of O2 to H2O through flavodiiron proteins (FLVs) and (ii) plastid terminal oxidases (PTOX) and (iii) the synthesis of starch. Real-time measurements of O2 exchange have demonstrated that FLVs immediately engage during dark-to-light transitions, allowing electron transport when the CBBC is not fully activated. Under these conditions, we quantified maximal FLV activity and its overall capacity to direct photosynthetic electrons toward O2 reduction. However, when starch synthesis is compromised, a greater proportion of the electrons is directed toward O2 reduction through both the FLVs and PTOX, suggesting an important role for starch synthesis in priming/regulating CBBC and electron transport. Moreover, partitioning energized electrons between sustainable (starch; energetic electrons are recaptured) and nonsustainable (H2O; energetic electrons are not recaptured) outlets is part of the energy management strategy of photosynthetic organisms that allows them to cope with the fluctuating conditions encountered in nature. Finally, unmasking the repertoire and control of such energetic reactions offers new directions for rational redesign and optimization of photosynthesis to satisfy global demands for food and other resources

Manipulation of gene expression by an ecdysone-inducible gene switch in tumor xenografts

BACKGROUND: Rapid, robust and reversible induction of transgene expression would significantly facilitate cancer gene therapy as well as allow the in vivo functional study of newly discovered genes in tumor formation and progression. The popularity of the ecdysone inducible gene switch system has led us to investigate whether such a system can successfully regulate gene expression in a syngeneic tumor system in vivo. RESULTS: MBT-2 and Panc02 carcinoma cells were transfected with components of a modification of the ecdysone switch system driving firefly luciferase (F-Luc). In vitro luciferase expression ± ecdysone analog GS-E indicated a robust induction with minimal baseline activity and complete decay after 24 hours without drug. In vitro selection of MBT-2 transfected cell clones which had complete absence of F-Luc expression in the absence of stimulation but which expressed this gene at high levels in response to GS-E were chosen for in vivo evaluation. Tumors from engineered MBT-2 cells were grown to 5 mm in diameter prior to GS-E administration, animals euthanized and tumors removed at 6, 12 and 24 hours after GS-E administration and assayed for F-Luc activity. GS-E resulted in a maximal induction of F-Luc activity at 6 hours in tumor tissue with almost complete reversion to control levels by 12 hours. CONCLUSIONS: This study is the first demonstration that robust and reversible transgene expression in tumors is feasible using the ecdysone system, allowing future rapid in vivo functional characterization of gene function or gene therapy applications

Regulation of smooth muscle α-actin expression and hypertrophy in cultured mesangial cells

Regulation of smooth muscle α-actin expression and hypertrophy in cultured mesangial cells.BackgroundMesangial cells during embryonic development and glomerular disease express smooth muscle α-actin (α-SMA). We were therefore surprised when cultured mesangial cells deprived of serum markedly increased expression of α-SMA. Serum-deprived mesangial cells appeared larger than serum-fed mesangial cells. We hypothesized that α-SMA expression may be more reflective of mesangial cell hypertrophy than hyperplasia.MethodsHuman mesangial cells were cultured in medium alone or with fetal bovine serum, thrombin, platelet-derived growth factor-BB (PDGF-BB) and/or transforming growth factor-β1 (TGF-β1). α-SMA expression was examined by immunofluorescence, Western blot, and Northern blot analysis. Cell size was analyzed by forward light scatter flow cytometry.Resultsα-SMA mRNA was at least tenfold more abundant after three to five days in human mesangial cells plated without serum, but β-actin mRNA was unchanged. Serum-deprived cells contained 5.3-fold more α-SMA after three days and 56-fold more after five days by Western blot. Serum deprivation also increased α-SMA in rat and mouse mesangial cells. The effects of serum deprivation on α-SMA expression were reversible. Mesangial cell mitogens, thrombin or PDGF-BB, decreased α-SMA, but TGF-β1 increased α-SMA expression and slowed mesangial cell proliferation in serum-plus medium. Flow cytometry showed that serum deprivation or TGF-β1 treatment caused mesangial cell hypertrophy. PDGF-BB, thrombin, or thrombin receptor-activating peptide blocked hypertrophy in response to serum deprivation.ConclusionsWe conclude that increased α-SMA expression in mesangial cells reflects cellular hypertrophy rather than hyperplasia