On Some Circular Distributions Induced by Inverse Stereographic Projection

In earlier studies of circular data, the corresponding probability distributions considered were mostly assumed to be symmetric. However, the assumption of symmetry may not be meaningful for some data. Thus there has been increased interest, more recently, in developing skewed circular distributions. In this article we introduce three skewed circular models based on inverse stereographic projection, originally introduced by Minh and Farnum (2003), by considering three different versions of skewed-t considered in the literature, namely skewed-t by Azzalini (1985), two-piece skewed-t (Fern´andez and Steel, 1998) and skewedt by Jones and Faddy (2003). Shape properties of the resulting circular distributions along with estimation of parameters using maximum likelihood are also discussed in this article. Further, real data sets are used to illustrate the application of the new models. It is found that Azzalini and Jones-Faddy skewed-t versions are good competitors, however, the Jones-Faddy version is computationally more tractable

Estimation of the interfacial shears strength, orientation factor and mean equivalent intrinsic tensile strength in old newspaper fiber/polypropylene composites

The present paper investigates the suitability of old newspapers (ONPs) as a source of reinforcing fibers for composite materials. Different percentages of ONP fibers were compounded with polypropylene (PP). A coupling agent was added to the compound to improve the interface between matrix and reinforcing fibers. Tensile test were performed to obtain the mechanical properties of the composite materials. Micromechanics of the fibers were obtained using Hirsch model, Bowyer Bader methodology and Kelly-Tyson equations. Due to the presence of a percentage of calcium carbonate in the obtained fibers (10%), the computed intrinsic characteristics were addressed as equivalent. The most important results were the mean equivalent intrinsic tensile strength of the ONP fibers, the mean orientation angle and the mean interfacial shear strength. The contributions of the matrix, the subcritical and the supercritical fibers to the tensile strength of the composite material were also computed. (C) 2013 Elsevier Ltd. All rights reserved.Serrano, A.; Espinach, FX.; Julian, F.; Rey Tormos, RMD.; Mendez, JA.; Mutje, P. (2013). Estimation of the interfacial shears strength, orientation factor and mean equivalent intrinsic tensile strength in old newspaper fiber/polypropylene composites. Composites Part B: Engineering. 50:232-238. doi:10.1016/j.compositesb.2013.02.018S2322385

Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers-polypropylene composites

Stiffness is one of the most relevant characteristics of composite materials. Natural wood fibers have demonstrated their ability to increase the Young's moduli of composite materials, and old newspapers are a potential source of reinforcing fibers for composite materials. There are some micromechanic models to predict the Young's modulus of composite materials, and one of the input data is the intrinsic modulus of their fibers. This intrinsic modulus is a value which is difficult or impossible to measure in the case of wood fibers, due to their measures. This paper evaluates the stiffening abilities of old newspaper fibers and the possibility to back calculate the value of the intrinsic Young's Modulus by means of micromechanic models. Different percentages of old newspaper fibers were compounded with polypropylene (PP). Micromechanics of the fibers were obtained using Hirsch model, Cox-Krenchel's model, Tsai-Pagano model and Halpin-Tsai equations. The most important results were the average intrinsic Young's modulus of the fibers, the mean orientation angle and the mean modulus efficiency factor.Serrano, A.; Espinach, FX.; Tresserras, J.; Rey Tormos, RMD.; Pellicer, N.; Mutje Pujol, P. (2014). Macro and micromechanics analysis of short fiber composites stiffness: The case of old newspaper fibers-polypropylene composites. Materials and Design. 55:319-324. doi:10.1016/j.matdes.2013.10.011S3193245

Geoeconomic variations in epidemiology, ventilation management, and outcomes in invasively ventilated intensive care unit patients without acute respiratory distress syndrome: a pooled analysis of four observational studies

Background: Geoeconomic variations in epidemiology, the practice of ventilation, and outcome in invasively ventilated intensive care unit (ICU) patients without acute respiratory distress syndrome (ARDS) remain unexplored. In this analysis we aim to address these gaps using individual patient data of four large observational studies. Methods: In this pooled analysis we harmonised individual patient data from the ERICC, LUNG SAFE, PRoVENT, and PRoVENT-iMiC prospective observational studies, which were conducted from June, 2011, to December, 2018, in 534 ICUs in 54 countries. We used the 2016 World Bank classification to define two geoeconomic regions: middle-income countries (MICs) and high-income countries (HICs). ARDS was defined according to the Berlin criteria. Descriptive statistics were used to compare patients in MICs versus HICs. The primary outcome was the use of low tidal volume ventilation (LTVV) for the first 3 days of mechanical ventilation. Secondary outcomes were key ventilation parameters (tidal volume size, positive end-expiratory pressure, fraction of inspired oxygen, peak pressure, plateau pressure, driving pressure, and respiratory rate), patient characteristics, the risk for and actual development of acute respiratory distress syndrome after the first day of ventilation, duration of ventilation, ICU length of stay, and ICU mortality. Findings: Of the 7608 patients included in the original studies, this analysis included 3852 patients without ARDS, of whom 2345 were from MICs and 1507 were from HICs. Patients in MICs were younger, shorter and with a slightly lower body-mass index, more often had diabetes and active cancer, but less often chronic obstructive pulmonary disease and heart failure than patients from HICs. Sequential organ failure assessment scores were similar in MICs and HICs. Use of LTVV in MICs and HICs was comparable (42\ub74% vs 44\ub72%; absolute difference \u20131\ub769 [\u20139\ub758 to 6\ub711] p=0\ub767; data available in 3174 [82%] of 3852 patients). The median applied positive end expiratory pressure was lower in MICs than in HICs (5 [IQR 5\u20138] vs 6 [5\u20138] cm H2O; p=0\ub70011). ICU mortality was higher in MICs than in HICs (30\ub75% vs 19\ub79%; p=0\ub70004; adjusted effect 16\ub741% [95% CI 9\ub752\u201323\ub752]; p<0\ub70001) and was inversely associated with gross domestic product (adjusted odds ratio for a US$10 000 increase per capita 0\ub780 [95% CI 0\ub775\u20130\ub786]; p<0\ub70001). Interpretation: Despite similar disease severity and ventilation management, ICU mortality in patients without ARDS is higher in MICs than in HICs, with a strong association with country-level economic status. Funding: No funding

Integrated Approach of Ergonomics and MCDM into Truck Drivers' Seat Comfort: A Case Study in Bangladesh

Seats are one of the most significant components for automotive vehicles. Prolonged driving a truck in Bangladesh is not so comfortable because no one design the seat properly considering anthropometric data. The improper seat design causes various health problems. Therefore, the improvement of seating posture is the urgency for reducing health issues. In this paper, a total of 120 Bangladeshi truck drivers were taken as sample for measuring anthropometric data. A comparison of health status between drivers and normal people showed that drivers suffer much than the control group. The relevant feedbacks required for the analysis were collected from the expert's opinion. The integrated approach (AHP-TOPSIS)found that among four health issues, back pain is more critical health issue associated with the existing seat dimension. Finally, the study suggested seat width as the most decisive design parameter on which designers should give much attention while designing truck drivers' seat

AHP based Anthropometric Analysis of University Hall Bed Design in Bangladesh

In university hall, different types of bed are used for providing sleeping environment to the students. Although there are wide variations in the design of students bed in Bangladeshi university hall, none of them are designed properly considering the anthropometric data. In this study, four anthropometric measurements related to normal students bed dimensions were measured from 300 students from a public university hall in Bangladesh. The feedbacks regarding different health problems and their reasons were collected from considering practical situations of the students and gathering experts opinions. Chi-square test showed that back pain, blood circulation problem, fatigue, comfort, and sleeping problem are related to students anthropometric measurements. The analytic hierarchy process (AHP) analysis identified students bed length as the most responsible attribute for ergonomic problems of the students. Finally, the linear regression and correlation analysis suggested the bed dimensions based on stature of the students. This study can be a helpful guideline for industrial engineers and manufacturers in designing more comfortable students bed

Not Available

Not AvailableNot AvailableNot Availabl