34,384 research outputs found

    Flame Instability and Transition to Detonation in Supersonic Reactive Flows

    Full text link
    Multidimensional numerical simulations of a homogeneous, chemically reactive gas were used to study ignition, flame stability, and deflagration-to-detonation transition (DDT) in a supersonic combustor. The configuration studied was a rectangular channel with a supersonic inflow of stoichiometric ethylene-oxygen and a transimissive outflow boundary. The calculation is initialized with a velocity in the computational domain equal to that of the inflow, which is held constant for the duration of the calculation. The compressible reactive Navier-Stokes equations were solved by a high-order numerical algorithm on an adapting mesh. This paper describes two calculations, one with a Mach 3 inflow and one with Mach 5.25. In the Mach 3 case, the fuel-oxidizer mixture does not ignite and the flow reaches a steady-state oblique shock train structure. In the Mach 5.25 case, ignition occurs in the boundary layers and the flame front becomes unstable due to a Rayleigh-Taylor instability at the interface between the burned and unburned gas. Growth of the reaction front and expansion of the burned gas compress and preheat the unburned gas. DDT occurs in several locations, initiating both at the flame front and in the unburned gas, due to an energy-focusing mechanism. The growth of the flame instability that leads to DDT is analyzed using the Atwood number parameter

    The development of absorptive capacity-based innovation in a construction SME

    Get PDF
    Traditionally, construction has been a transaction-oriented industry. However, it is changing from the design-bid-build process into a business based on innovation capability and performance management, in which contracts are awarded on the basis of factors such as knowledge, intellectual capital and skills. This change presents a challenge to construction-sector SMEs with scarce resources, which must find ways to innovate based on those attributes to ensure their future competitiveness. This paper explores how dynamic capability, using an absorptive capacity framework in response to these challenges, has been developed in a construction-based SME. The paper also contributes to the literature on absorptive capacity and innovation by showing how the construct can be operationalized within an organization. The company studied formed a Knowledge Transfer Partnership using action research over a two-year period with a local university. The aim was to increase its absorptive capacity and hence its ability to meet the changing market challenges. The findings show that absorptive capacity can be operationalized into a change management approach for improving capability-based competitiveness. Moreover, it is important for absorptive capacity constructs and language to be contextualized within a given organizational setting (as in the case of the construction-based SME in the present study)

    Inequalities for low-energy symmetric nuclear matter

    Full text link
    Using effective field theory we prove inequalities for the correlations of two-nucleon operators in low-energy symmetric nuclear matter. For physical values of operator coefficients in the effective Lagrangian, the S = 1, I = 0 channel correlations must have the lowest energy and longest correlation length in the two-nucleon sector. This result is valid at nonzero density and temperature.Comment: 9 page

    The Delta-Delta Intermediate State in 1S0 Nucleon-Nucleon Scattering From Effective Field Theory

    Full text link
    We examine the role of the Delta-Delta intermediate state in low energy NN scattering using effective field theory. Theories both with and without pions are discussed. They are regulated with dimensional regularization and MSbar subtraction. We find that the leading effects of the Delta-Delta state can be absorbed by a redefinition of the contact terms in a theory with nucleons only. It does not remove the requirement of a higher dimension operator to reproduce data out to moderate momentum. The explicit decoupling of the Delta-Delta state is shown for the theory without pions.Comment: 16 pages, 3 figures, uses harvma

    Proposal for a Performance Dashboard for the Monitoringof Water and Sewage Service Companies (WaSCs)

    Get PDF
    The water and sewage industry provides an essential service to the community, but it is characterized by natural monopoly tendencies of service suppliers. In this framework, it is very important to assist regulators with a small set of critical indicators (performance dashboard) for the evaluation and monitoring of the service provided by Water and Sewage Companies (WaSCs). The paper originates from the analysis of situation of Piemonte (Italy), where each regional and local body adopts a proprietary Performance Measurement System (PMS). In order to improve the coordination of information flow and to support the definition of common service standards, a methodology to merge existing PMSs and define a unique shared reference system is proposed. The Kaplan and Norton's Balanced Scorecard (BSC) is adopted as the reference model of this approach. BSC is widely recognized to be an exhaustive and balanced framework in describing the performances of an organization and ensures that all the operational aspects of WaSCs are adequately monitored. The output of the proposed procedure is a general performance dashboard for the monitoring of WaSCs. The dashboard is shown and some remarks about indicators properties are developed. In particular, this analysis highlights some common pitfalls originated by a ‘rushed' aggregation of several performance indicators. Description is supported by several example

    Enhanced chiral logarithms in partially quenched QCD

    Get PDF
    I discuss the properties of pions in ``partially quenched'' theories, i.e. those in which the valence and sea quark masses, mVm_V and mSm_S, are different. I point out that for lattice fermions which retain some chiral symmetry on the lattice, e.g. staggered fermions, the leading order prediction of the chiral expansion is that the mass of the pion depends only on mVm_V, and is independent of mSm_S. This surprising result is shown to receive corrections from loop effects which are of relative size mSln⁥mVm_S \ln m_V, and which thus diverge when the valence quark mass vanishes. Using partially quenched chiral perturbation theory, I calculate the full one-loop correction to the mass and decay constant of pions composed of two non-degenerate quarks, and suggest various combinations for which the prediction is independent of the unknown coefficients of the analytic terms in the chiral Lagrangian. These results can also be tested with Wilson fermions if one uses a non-perturbative definition of the quark mass.Comment: 14 pages, 3 figures, uses psfig. Typos in eqs (18)-(20) corrected (alpha_4 is replaced by alpha_4/2

    The continued spectral and temporal evolution of RX J0720.4-3125

    Get PDF
    RX J0720.4-3125 is the most peculiar object among a group of seven isolated X-ray pulsars (the so-called "Magnificent Seven"), since it shows long-term variations of its spectral and temporal properties on time scales of years. This behaviour was explained by different authors either by free precession (with a seven or fourteen years period) or possibly a glitch that occurred around MJD=52866±73days\mathrm{MJD=52866\pm73 days}. We analysed our most recent XMM-Newton and Chandra observations in order to further monitor the behaviour of this neutron star. With the new data sets, the timing behaviour of RX J0720.4-3125 suggests a single (sudden) event (e.g. a glitch) rather than a cyclic pattern as expected by free precession. The spectral parameters changed significantly around the proposed glitch time, but more gradual variations occurred already before the (putative) event. Since MJD≈53000days\mathrm{MJD\approx53000 days} the spectra indicate a very slow cooling by ∌\sim2 eV over 7 years.Comment: seven pages, three figures, three tables; accepted by MNRA

    study on the chopping and mixing of cotton stalks with soil

    Get PDF
    This study examined the methods adopted in Turkey to remove cotton stalks remaining in the field after the cotton harvest and quantified the efficiency of different mechanized stalk choppers. In this study, theperformance of three different types of cotton stalk choppers was assessed (chain-type, splined-type and vertical-blade rotating dredge). Field experiments were conducted with each type to determine the proportion of non-uprooted cotton stalks; mean “post-chopping height” of the stalks, measured from soil surface; and the frequency distribution of the piece length of the stalks scattered around the field or mixed with soil after chopping. In addition, the workforce requirement, using time and fuel consumption of each type of chopper was calculated. The lowest fuel consumption was recorded by the chain-type stalk chopper (5.0 l/da), while the highest fuel consumption was recorded by the vertical-blade rotatingdredge (7.1 l/ha). The largest “mean post-chopping piece size” was achieved by the vertical-blade rotating dredge plus geared cylinder (28.36 cm), while the smallest size was recorded by the splinedtype stalk chopper (13.38 cm). The highest rate of stalks mixed with the soil after chopping was achieved by the splined-type stalk copper (92.5%)

    Sensitivity of a Bolometric Interferometer to the CMB power spectrum

    Full text link
    Context. The search for B-mode polarization fluctuations in the Cosmic Microwave Background is one of the main challenges of modern cosmology. The expected level of the B-mode signal is very low and therefore requires the development of highly sensitive instruments with low systematic errors. An appealing possibility is bolometric interferometry. Aims. We compare in this article the sensitivity on the CMB angular power spectrum achieved with direct imaging, heterodyne and bolometric interferometry. Methods. Using a simple power spectrum estimator, we calculate its variance leading to the counterpart for bolometric interferometry of the well known Knox formula for direct imaging. Results. We find that bolometric interferometry is less sensitive than direct imaging. However, as expected, it is finally more sensitive than heterodyne interferometry due to the low noise of the bolometers. It therefore appears as an alternative to direct imagers with different and possibly lower systematic errors, mainly due to the absence of an optical setup in front of the horns.Comment: 5 pages, 3 figures. This last version matches the published version (Astronomy and Astrophysics 491 3 (2008) 923-927). Sensitivity of Heterodyne Interferometers modified by a factor of tw

    Eigenstate Structure in Graphs and Disordered Lattices

    Full text link
    We study wave function structure for quantum graphs in the chaotic and disordered regime, using measures such as the wave function intensity distribution and the inverse participation ratio. The result is much less ergodicity than expected from random matrix theory, even though the spectral statistics are in agreement with random matrix predictions. Instead, analytical calculations based on short-time semiclassical behavior correctly describe the eigenstate structure.Comment: 4 pages, including 2 figure
    • 

    corecore