7,632 research outputs found
A finite element surface impedance representation for steady-state problems
A procedure for determining the scattered pressure field resulting from a monochromatic harmonic wave that is incident upon a layer energy absorbing structure is treated. The situation where the structure is modeled with finite elements and the surrounding acoustic medium (water or air) is represented with either acoustic finite elements, or some type of boundary integral formulation, is considered. Finite element modeling problems arise when the construction of the structure, at the fluid structure interface, are nonhomogeneous and in particular, when the inhomogeneities are small relative to the acoustic wave length. An approximate procedure is presented for replacing the detailed microscopic representation of the layered surface configuration with an equivalent simple surface impedance finite element, which is especially designed to work only at limited frequencies. An example problem is presented using NASTRAN. However, the procedure is general enough to adapt to practically any finite element code having a steady state option
Solution sensitivity and accuracy study of NASTRAN for large dynamic problems involving structural damping
Large dynamic problems involving NASTRAN SOLUTION 8 (i.e., the steady state dynamic response option wherein all response quantities vary as e sub i omega t, where omega is the driving frequency and t is time) are considered. Using a submerged steel plate with a viscoelastic layer layer as the bench mark sample, the solution sensitivity and solution accuracy are checked. The solution sensitivity is examined by running the same finite element model on different computers, different versions of NASTRAN, and different precision levels. The solution accuracy is evaluated for these same runs by comparing the NASTRAN results with the exact solution of the same problem
Steady state solutions to dynamically loaded periodic structures
The general problem of solving for the steady state (time domain) dynamic response (i.e., NASTRAN rigid format-8) of a general elastic periodic structure subject to a phase difference loading of the type encountered in traveling wave propagation problems was studied. Two types of structural configurations were considered; in the first type, the structure has a repeating pattern over a span that is long enough to be considered, for all practical purposes, as infinite; in the second type, the structure has structural rotational symmetry in the circumferential direction. The theory and a corresponding set of DMAP instructions which permits the NASTRAN user to automatically alter the rigid format-8 sequence to solve the intended class of problems are presented. Final results are recovered as with any ordinary rigid format-8 solution, except that the results are only printed for the typical periodic segment of the structure. A simple demonstration problem having a known exact solution is used to illustrate the implementation of the procedure
Propagation of flexural and membrane waves with fluid loaded NASTRAN plate and shell elements
Modeling of flexural and membrane type waves existing in various submerged (or in vacuo) plate and/or shell finite element models that are excited with steady state type harmonic loadings proportioned to e(i omega t) is discussed. Only thin walled plates and shells are treated wherein rotary inertia and shear correction factors are not included. More specifically, the issue of determining the shell or plate mesh size needed to represent the spatial distribution of the plate or shell response is of prime importance towards successfully representing the solution to the problem at hand. To this end, a procedure is presented for establishing guide lines for determining the mesh size based on a simple test model that can be used for a variety of plate and shell configurations such as, cylindrical shells with water loading, cylindrical shells in vacuo, plates with water loading, and plates in vacuo. The procedure for doing these four cases is given, with specific numerical examples present only for the cylindrical shell case
A summary of NASTRAN fluid/structure interaction capabilities
A summary of fluid/structure interaction capabilities for the NASTRAN computer program is presented. Indirect applications of the program towards solving this class of problem were concentrated on. For completeness and comparitive purposes, direct usage of NASTRAN is briefly discussed. The solution technology addresses both steady state and transient dynamic response problems
HDECAY: a Program for Higgs Boson Decays in the Standard Model and its Supersymmetric Extension
We describe the Fortran code HDECAY which calculates the decay widths and the
branching ratios of the Standard Model Higgs boson, and of the neutral and
charged Higgs particles of the Minimal Supersymmetric extension of the Standard
Model. The program is self-contained (with all subroutines included), easy to
run, fast and calculates the decay widths and branching ratios according to the
current theoretical knowledge.Comment: LaTeX, 26 pages, 3 ps figures include
Propagating plane harmonic waves through finite length plates of variable thickness using finite element techniques
An analysis is given using finite element techniques which addresses the propagaton of a uniform incident pressure wave through a finite diameter axisymmetric tapered plate immersed in a fluid. The approach utilized in developing a finite element solution to this problem is based upon a technique for axisymmetric fluid structure interaction problems. The problem addressed is that of a 10 inch diameter axisymmetric fixed plate totally immersed in a fluid. The plate increases in thickness from approximately 0.01 inches thick at the center to 0.421 inches thick at a radius of 5 inches. Against each face of the tapered plate a cylindrical fluid volume was represented extending five wavelengths off the plate in the axial direction. The outer boundary of the fluid and plate regions were represented as a rigid encasement cylinder as was nearly the case in the physical problem. The primary objective of the analysis is to determine the form of the transmitted pressure distribution on the downstream side of the plate
Library of SM and anomalous WWgamma couplings for the e+e- -> f \bar{f} n\gamma Monte Carlo programs
A brief description of the library of the Standard Model and anomalous
WWgamma coupling contribution to the matrix element for e+e- -> \nu \bar{\nu}
n\gamma process is given. It can be used with any Monte Carlo program for e+e-
-> f \bar f n\gamma processes. A working example of the application for the
KORALZ version 4.04 is also provided.Comment: 1+5 pages (LaTeX
CP violation at one loop in the polarization-independent chargino production in e+e- collisions
Recently Osland and Vereshagin noticed, based on sample calculations of some
box diagrams, that in unpolarised e+e- collisions CP-odd effects in the
non-diagonal chargino-pair production process are generated at one-loop. Here
we perform a full one-loop analysis of these effects and point out that in some
cases the neglected vertex and self-energy contributions may play a dominant
role. We also show that CP asymmetries in chargino production are sensitive not
only to the phase of mu parameter in the chargino sector but also to the phase
of stop trilinear coupling A_t.Comment: 14 pages, 5 figure
- …