Plastic Deformation in Laser-Induced Shock Compression of Monocrystalline Copper

Copper monocrystals were subjected to shock compression at pressures of 10–60 GPa by a short (3 ns initial) duration laser pulse. Transmission electron microscopy revealed features consistent with previous observations of shock-compressed copper, albeit at pulse durations in the µs regime. The results suggest that the defect structure is generated at the shock front. A mechanism for dislocation generation is presented, providing a realistic prediction of dislocation density as a function of pressure. The threshold stress for deformation twinning in shock compression is calculated from the constitutive equations for slip, twinning, and the Swegle-Grady relationship

Design and fabrication of a SIO2/ST-cut quartz love mode surface acoustic wave transducer for operation in liquid media

Love mode surface acoustic wave (SAW) transducers were designed and fabricated by depositing silicon dioxide on a ST-cut quartz crystal wafer using r.f. magnetron sputtering. Two different propagation directions have been investigated by aligning the SAW finger pattern along the x-axis propagation direction and the direction orthogonal to the x-axis of the ST-cut quartz crystal. The latter, in which the propagation mode is dominantly the Love mode, shows promising characteristics for use as a high frequency SAW transducer because of high acoustic wave propagation velocity and electromechanical coupling coefficient. Phase and group velocity, capacitance per unit length of electrodes, insertion loss and input admittance, of two transducers, with different alignments, have been measured and compared

Transient x-ray diffraction used to diagnose shock compressed Si crystals on the Nova laser

Transient x-ray diffraction is used to record time-resolved information about the shock compression of materials. This technique has been applied on Nova shock experiments driven using a hohlraum x-ray drive. Data were recorded from the shock release at the free surface of a Si crystal, as well as from Si at an embedded ablator/Si interface. Modeling has been done to simulate the diffraction data incorporating the strained crystal rocking curves and Bragg diffraction efficiencies. Examples of the data and post-processed simulations are presented

Oral Candidiasis amongst cancer patients at Qods Hospital

Background: Within the past two decades, Candida species have emerged as major human pathogens and are currently the fourth most common cause of nosocomial infection. Propose of this study was to determine the occurrence of oral Candidiasis among cancer patients at Qods hospitals in Sanandaj.Materials and Methods: Sixty cancer patients were examined for oral candidiasis. For all patients, the clinical diagnosis had to be confirmed microbiologically by the presence of yeasts and / or hyphae or pseudohyphae on potassium hydroxide–treated smears of oral swabs. Oral samples were obtained and cultured on Sabouraud's dextrose agar and CHROMagar.Results: 25 out of the 60 patients (41.7%) were males and 35 (58.3%) were females ranging in age from 15 to 79 years. Gastrointestinal cancer and Breast cancer were the most frequent cancer in the studied group, accounting for 65 % and 18.4 % respectively. The mean weight of the patients was 52.67 Kg (range, 38– 80 Kg). Similarly, the mean of hospital stay was 3.58 days (range; 1-9 days). From these patients, 19 Candida spp were isolated; C. albicans alone outnumbered other species and accounted for 73.68% episodes of trash. For C. albicans isolates, the MIC values ranges from 1 to 9 Z g / ml μg / ml for polyenes and from 0.03 to 16 Z g / ml for the azole antifungals. All the Candida albicans had closely related MFCs values.Conclusion: In conclusions, the finding of our study strongly suggest that oral candidiasis is a frequent complication among cancer patients, being C. albicans the main etiological agent.Keywords: Cancer, Oral candidiasis, Candida albicans, Antifungal agentsdoi: 10.4314/ajcem.v12i3.

Measurements of scattering observables for the pdpd break-up reaction

High-precision measurements of the scattering observables such as cross sections and analyzing powers for the proton-deuteron elastic and break-up reactions have been performed at KVI in the last two decades and elsewhere to investigate various aspects of the three-nucleon force (3NF) effects simultaneously. In 2006 an experiment was performed to study these effects in $\vec{p}+d$ break-up reaction at 135 MeV with the detection system, Big Instrument for Nuclear polarization Analysis, BINA. BINA covers almost the entire kinematical phase space of the break-up reaction. The results are interpreted with the help of state-of-the-art Faddeev calculations and are partly presented in this contribution.Comment: Proceedings of 19th International IUPAP Conference on Few-Body Problems in Physics, Bonn University, 31.08 - 05.09.2009, Bonn, GERMAN

Systematic investigation of the elastic proton-deuteron differential cross section at intermediate energies

To investigate the importance of three-nucleon forces (3NF) systematically over a broad range of intermediate energies, the differential cross sections of elastic proton-deuteron scattering have been measured at proton bombarding energies of 108, 120, 135, 150, 170 and 190 MeV at center-of-mass angles between $30^\circ$ and $170^\circ$. Comparisons with Faddeev calculations show unambiguously the shortcomings of calculations employing only two-body forces and the necessity of including 3NF. They also show the limitations of the latest few-nucleon calculations at backward angles, especially at higher beam energies. Some of these discrepancies could be partially due to relativistic effects. Data at lowest energy are also compared with a recent calculation based on \chipt

Precision measurement of vector and tensor analyzing powers in elastic deuteron-proton scattering

High precision vector and tensor analyzing powers of elastic deuteron-proton d+p scattering have been measured at intermediate energies to investigate effects of three-nucleon forces (3NF). Angular distribution in the range of 70-120 degree in the center-of mass frame for incident-deuteron energies of 130 and 180 MeV were obtained using the RIKEN facility. The beam polarization was unambiguously determined by measuring the 12C(d,alpha)10B(2+) reaction at 0 degree. Results of the measurements are compared with state-of-the-art three-nucleon calculations. The present modeling of nucleon-nucleon forces and its extension to the three-nucleon system is not sufficient to describe the high precision data consistently and requires, therefore, further investigation

Alkali ratio control for lead-free piezoelectric thin films utilizing elemental diffusivities in RF plasma

High performance piezoelectric thin films are generally lead-based, and find applications in sensing, actuation and transduction in the realms of biology, nanometrology, acoustics and energy harvesting. Potassium sodium niobate (KNN) is considered to be the most promising lead-free alternative, but it is hindered by the inability to control and attain perfect stoichiometry materials in the thin film form while using practical large area deposition techniques. In this work, we identify the contribution of the elemental diffusivities in the radio frequency (RF) plasma in determining the alkali loss in the KNN thin films. We have also examined the effect of the substrate temperature during the RF magnetron sputtering deposition on the crystal structure of the substrate and KNN thin films, as well as the effect of the postannealing treatments. These results indicate the need for well-designed source materials and the potential to use the deposition partial pressure to alter the dopant concentrations

Proton-deuteron radiative capture cross sections at intermediate energies

Differential cross sections of the reaction $p(d,^3{\rm He})\gamma$ have been measured at deuteron laboratory energies of 110, 133 and 180 MeV. The data were obtained with a coincidence setup measuring both the outgoing $^3$He and the photon. The data are compared with modern calculations including all possible meson-exchange currents and two- and three- nucleon forces in the potential. The data clearly show a preference for one of the models, although the shape of the angular distribution cannot be reproduced by any of the presented models.Comment: 6 pages, 6 figures, accepted for publication in EPJ

Hydrodynamic Instability Experiments on the Nova Laser

Hydrodynamic instabilities in compressible plasmas play a critical role in the fields of inertial confinement fusion (ICF), astrophysics, and high energy-density physics. We are, investigating hydrodynamic instabilities such as the Rayleigh-Taylor (RT) instability, at high compression at the Nova laser in a series of experiments, both in planar and in spherical geometry. In the indirect drive approach, a thermal x-ray drive is generated by focusing the Nova laser beams into a Au cylindrical radiation cavity (hohlraum). Issues in the instability evolution that we are examining are shock propagation and foil compression, RT growth of 2D versus 3D single-mode perturbations, drive pulse shape, perturbation location at the ablation front versus at an embedded interface, and multimode perturbation growth and nonlinear saturation. The effects of convergence on RT growth are being investigated both with hemispherical implosions of packages mounted on the hohlraum wall and with spherical implosions of capsules at the center of the hohlraum. Single-mode perturbations are pre-imposed at the ablation front of these capsules as a seed for the RT growth. In our direct drive experiments, we are investigating the effect of laser imprinting and subsequent RT growth on planar foils, both at {lambda}{sub Laser} = 1/3 {mu}m and 1/2 {mu}m. An overview is given describing recent progress in each of these areas