Deterministic and non-volatile switching of all-van der Waals spin-orbit torque system above room temperature without external magnetic fields

Two-dimensional van der Waals (vdW) magnetic materials hold promise for the development of high-density, energy-efficient spintronic devices for memory and computation. Recent breakthroughs in material discoveries and spin-orbit torque (SOT) control of vdW ferromagnets have opened a path for integration of vdW magnets in commercial spintronic devices. However, a solution for field-free electric control of perpendicular magnetic anisotropy (PMA) vdW magnets at room temperatures, essential for building compact and thermally stable spintronic devices, is still missing. Here, we report the first demonstration of field-free deterministic and non-volatile switching of a PMA vdW ferromagnet, Fe$_3$GaTe$_2$ above room temperature (up to 320 K). We use the unconventional out-of-plane anti-damping torque from an adjacent WTe$_2$ layer to enable such switching with a low current density of $2.23 \times 10^6$ A/cm$^2$. This study exemplifies the efficacy of low-symmetry vdW materials for spin-orbit torque control of vdW ferromagnets and provides an all-vdW solution for the next generation of scalable and energy-efficient spintronic devices

Archaeogenetic study of prehistoric rice remains from Thailand and India: Evidence of early japonica in South and Southeast Asia

We report successful extraction and sequencing of ancient DNA from carbonised rice grains (Oryza sativa) from six archaeological sites, including two from India and four from Thailand, ranging in age from ca. 2500 to 1500 BP. In total, 221 archaeological grains were processed by PCR amplification and primary-targeted fragments were sequenced for comparison with modern sequences generated from 112 modern rice populations, including crop and wild varieties. Our results include the genetic sequences from both the chloroplast and the nuclear genomes, based on 4 markers from the chloroplast and 6 from the nuclear genome. These markers allow differentiation of indica rice from japonica rice, the two major subspecies of Asian rice (Oryza sativa) considered to have separate geographical origins. One nuclear marker differentiates tropical and temperate forms of subspecies japonica. Other markers relate to phenotypic variation selected for under domestication, such as non-shattering, grain stickiness (waxy starch), and pericarp colour. Recovery and identification of sequences from nuclear markers was generally poor, whereas recovery of chloroplast sequences was successful, with at least one of four markers recovered in 61% of archaeological grains. This allowed for successful differentiation of indica or japonica subspecies variety, with japonica identified in all the Thai material and a mixture of indica and japonica chloroplasts in the two Indian assemblages. Rice subspecies was also assessed through conventional archaeobotanical methods relying on grain metrics, based on measurements from 13 modern populations and 2 499 archaeological grains. Grain metrics also suggest a predominance of japonica type grains in the Southeast Asian sites and a mixture of japonica and indica in the Indian sites with indica in the minority. The similar results of grain metrics and aDNA affirms grain measurements have some degree of reliability in rice subspecies identification. The study also highlights the great potential of ancient DNA recovery from archaeological rice. The data generated in the present study adds support to the model of rice evolution that includes hybridization between japonica and proto-indica

Genetic Patterns of Domestication in Pigeonpea (Cajanus cajan (L.) Millsp.) and Wild Cajanus Relatives

Pigeonpea (Cajanus cajan) is an annual or short-lived perennial food legume of acute regional importance, providing significant protein to the human diet in less developed regions of Asia and Africa. Due to its narrow genetic base, pigeonpea improvement is increasingly reliant on introgression of valuable traits from wild forms, a practice that would benefit from knowledge of its domestication history and relationships to wild species. Here we use 752 single nucleotide polymorphisms (SNPs) derived from 670 low copy orthologous genes to clarify the evolutionary history of pigeonpea (79 accessions) and its wild relatives (31 accessions). We identified three well-supported lineages that are geographically clustered and congruent with previous nuclear and plastid sequence-based phylogenies. Among all species analyzed Cajanus cajanifolius is the most probable progenitor of cultivated pigeonpea. Multiple lines of evidence suggest recent gene flow between cultivated and non-cultivated forms, as well as historical gene flow between diverged but sympatric species. Evidence supports that primary domestication occurred in India, with a second and more recent nested population bottleneck focused in tropical regions that is the likely consequence of pigeonpea breeding. We find abundant allelic variation and genetic diversity among the wild relatives, with the exception of wild species from Australia for which we report a third bottleneck unrelated to domestication within India. Domesticated C. cajan possess 75% less allelic diversity than the progenitor clade of wild Indian species, indicating a severe “domestication bottleneck” during pigeonpea domestication

Between China and South Asia: A Middle Asian corridor of crop dispersal and agricultural innovation in the Bronze Age

© The Author(s) 2016. The period from the late third millennium BC to the start of the first millennium AD witnesses the first steps towards food globalization in which a significant number of important crops and animals, independently domesticated within China, India, Africa and West Asia, traversed Central Asia greatly increasing Eurasian agricultural diversity. This paper utilizes an archaeobotanical database (AsCAD), to explore evidence for these crop translocations along southern and northern routes of interaction between east and west. To begin, crop translocations from the Near East across India and Central Asia are examined for wheat (Triticum aestivum) and barley (Hordeum vulgare) from the eighth to the second millennia BC when they reach China. The case of pulses and flax (Linum usitatissimum) that only complete this journey in Han times (206 BC–AD 220), often never fully adopted, is also addressed. The discussion then turns to the Chinese millets, Panicum miliaceum and Setaria italica, peaches (Amygdalus persica) and apricots (Armeniaca vulgaris), tracing their movement from the fifth millennium to the second millennium BC when the Panicum miliaceum reaches Europe and Setaria italica Northern India, with peaches and apricots present in Kashmir and Swat. Finally, the translocation of japonica rice from China to India that gave rise to indica rice is considered, possibly dating to the second millennium BC. The routes these crops travelled include those to the north via the Inner Asia Mountain Corridor, across Middle Asia, where there is good evidence for wheat, barley and the Chinese millets. The case for japonica rice, apricots and peaches is less clear, and the northern route is contrasted with that through northeast India, Tibet and west China. Not all these journeys were synchronous, and this paper highlights the selective long-distance transport of crops as an alternative to demic-diffusion of farmers with a defined crop package

CdO Doped Indium Oxide Thick Film as a Low Temperature H2S Gas Sensor

The thick films of AR grade In2O3 were prepared by standard screen-printing technique. The gas sensing performance of thick film was tested for various gases. It showed maximum gas response to ethanol vapor at 350 oC for 80 ppm. To improve the gas response and selectivity of the film towards a particular gas, In2O3 thick films were modified by dipping them in an aqueous solution of 0.1 M CdCl2 for different intervals of time. The surface modified (10 min) In2O3 thick film showed maximum response to H2S gas (10 ppm) than pure In2O3 thick film at 150 oC. Cadmium oxide on the surface of the film shifts the gas response from ethanol vapor to H2S gas. A systematic study of sensing performance of the thick films indicates the key role played by cadmium oxide on the surface of thick films. The selectivity, gas response and recovery time of the thick films were measured and presented

Studies on Gas Sensing Performance of Cr-doped Indium Oxide Thick Film Sensors

A series of In1-xCrxO3 composites, with x ranging from 0.01 to 0.5wt% were prepared by mechanochemically starting from InCl3 and CrO3. Structural and micro structural characteristics of the sample were investigated by XRD, SEM with EDAX. Thick films of pure Indium Oxide and composites were prepared by standard screen printing technique. The gas sensitivity of these thick films was tested for various gases. The pure Indium Oxide thick film (x=0) shows maximum sensitivity to ethanol vapour (80 ppm) at 350 oC, but composite-A (x=0.01) thick film shows maximum sensitivity to H2S gas (40 ppm) at 250 oC, composite-B (x=0.1) thick film shows higher sensitivity to NH3 gas (80 ppm) at 250 oC and composite-C (x=0.5) thick film shows maximum sensitivity to Cl2 gas (80 ppm) at 350 oC. A systematic study of gas sensing performance of the sensors indicates the key role played by concentration variation of Cr doped species. The sensitivity, selectivity and recovery time of the sensor were measured and presented

Spray Pyrolyzed Polycrystalline Tin Oxide Thin Film as Hydrogen Sensor

Polycrystalline tin oxide (SnO2) thin film was prepared by using simple and inexpensive spray pyrolysis technique (SPT). The film was characterized for their phase and morphology by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The crystallite size calculated from the XRD pattern is 84 nm. Conductance responses of the polycrystalline SnO2 were measured towards gases like hydrogen (H2), liquefied petroleum gas (LPG), ethanol vapors (C2H5OH), NH3, CO, CO2, Cl2 and O2. The gas sensing characteristics were obtained by measuring the sensor response as a function of various controlling factors like operating temperature, operating voltages (1 V, 5 V, 10 V 15 V, 20 V and 25 V) and concentration of gases. The sensor response measurement showed that the SnO2 has maximum response to hydrogen. Furthermore; the SnO2 based sensor exhibited fast response and good recovery towards hydrogen at temperature 150 oC. The result of response towards H2 reveals that SnO2 thin film prepared by SPT would be a suitable material for the fabrication of the hydrogen sensor

Nano Ag-Doped In2O3 Thick Film: A Low-Temperature H2S Gas Sensor

Thick films of AR grade In2O3 were prepared by standard screen-printing technique. The gas sensing performances of thick films were tested for various gases. It showed maximum sensitivity to ethanol vapour at 350°C for 80 ppm concentration. To improve the sensitivity and selectivity of the film towards a particular gas, In2O3 sensors were surface-modified by dipping them in a solution of 2% nanosilver for different intervals of time. Obtained results indicated that spherical nano-Ag grains are highly dispersed on the surface of In2O3sensor. The surface area of the nano-Ag/ In2O3 sensor is several times larger than that of pure In2O3 sensor. In comparison with pure In2O3 sensor, all of the nano-Ag-doped sensors showed better sensing performance in respect of response, selectivity, and optimum operating temperature. The surface-modified (30 min) In2O3 sensor showed larger sensitivity to H2S gas (10 ppm) at 100°C. Nano silver on the surface of the film shifts the reactivity of film from ethanol vapour to H2S gas. A systematic study of gas sensing performance of the sensor indicates the key role played by the nano silver species on the surface. The sensitivity, selectivity, response, and recovery time of the sensor were measured and presented