An alternative application to the portuguese agro-industrial residue : wheat straw

The effects of alkaline treatments of the wheat straw with sodium hydroxide were investigated. The optimal condition for extraction of hemicelluloses was found to be with 0.50 mol/l sodium hydroxide at 55 °C for 2 h. This resulted in the release of 17.3% of hemicellulose (% dry starting material), corresponding to the dissolution of 49.3% of the original hemicellulose. The yields were determined by gravimetric analysis and expressed as a proportion of the starting material. Chemical composition and physico-chemical properties of the samples of hemicelluloses were elucidated by a combination of sugar analyses, Fourier transform infrared (FTIR), and thermal analysis. The results showed that the treatments were very effective on the extraction of hemicelluloses from wheat straw and that the extraction intensity (expressed in terms of alkali concentration) had a great influence on the yield and chemical features of the hemicelluloses. The FTIR analysis revealed typical signal pattern for the hemicellulosic fraction in the 1,200–1,000 cm−1 region. Bands between 1,166 and 1,000 cm−1 are typical of xylans.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Fundação de Amparo a Pesquisa do Estado de São Paulo/Brazil (FAPESP)Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BPD/26156/2005, SFRH/BPD/26108/200

ESKIMO1 Disruption in Arabidopsis Alters Vascular Tissue and Impairs Water Transport

Water economy in agricultural practices is an issue that is being addressed through studies aimed at understanding both plant water-use efficiency (WUE), i.e. biomass produced per water consumed, and responses to water shortage. In the model species Arabidopsis thaliana, the ESKIMO1 (ESK1) gene has been described as involved in freezing, cold and salt tolerance as well as in water economy: esk1 mutants have very low evapo-transpiration rates and high water-use efficiency. In order to establish ESK1 function, detailed characterization of esk1 mutants has been carried out. The stress hormone ABA (abscisic acid) was present at high levels in esk1 compared to wild type, nevertheless, the weak water loss of esk1 was independent of stomata closure through ABA biosynthesis, as combining mutant in this pathway with esk1 led to additive phenotypes. Measurement of root hydraulic conductivity suggests that the esk1 vegetative apparatus suffers water deficit due to a defect in water transport. ESK1 promoter-driven reporter gene expression was observed in xylem and fibers, the vascular tissue responsible for the transport of water and mineral nutrients from the soil to the shoots, via the roots. Moreover, in cross sections of hypocotyls, roots and stems, esk1 xylem vessels were collapsed. Finally, using Fourier-Transform Infrared (FTIR) spectroscopy, severe chemical modifications of xylem cell wall composition were highlighted in the esk1 mutants. Taken together our findings show that ESK1 is necessary for the production of functional xylem vessels, through its implication in the laying down of secondary cell wall components

Fructan and its relationship to abiotic stress tolerance in plants

Numerous studies have been published that attempted to correlate fructan concentrations with freezing and drought tolerance. Studies investigating the effect of fructan on liposomes indicated that a direct interaction between membranes and fructan was possible. This new area of research began to move fructan and its association with stress beyond mere correlation by confirming that fructan has the capacity to stabilize membranes during drying by inserting at least part of the polysaccharide into the lipid headgroup region of the membrane. This helps prevent leakage when water is removed from the system either during freezing or drought. When plants were transformed with the ability to synthesize fructan, a concomitant increase in drought and/or freezing tolerance was confirmed. These experiments indicate that besides an indirect effect of supplying tissues with hexose sugars, fructan has a direct protective effect that can be demonstrated by both model systems and genetic transformation

Molecular interactions in bacterial cellulose composites studied by 1D FT-IR and dynamic 2D FT-IR spectroscopy

Specific strain-induced orientation and interactions in three Acetobacter cellulose composites: cellulose (C), cellulose/pectin (CP) and cellulose/xyloglucan (CXG) were characterized by FT-IR and dynamic 2D FT-IR spectroscopies. On the molecular level, the reorientation of the cellulose fibrils occurred in the direction of the applied mechanical strain. The cellulose-network reorientation depends on the composition of the matrix, including the water content, which lubricates the motion of macromolecules in the network. At the submolecular level, dynamic 2D FT-IR data suggested that there was no interaction between cellulose and pectin in CP and that they responded independently to a small amplitude strain, while in CXG, cellulose and xyloglucan were uniformly strained along the sample length. (C) 2002 Elsevier Science Ltd. All rights reserved

Application of FT-IR-ATR Spectroscopy to Evaluate the Penetration of Surface Sizing Agents into the Paper Structure

It is widely recognized that the surface properties of paper depend on the fibrous matrix and the final surface treatment applied to the paper. Regarding chemical paper surface treatments, an important issue is the evaluation of the penetration of chemical compounds into the fibrous matrix, as the chemicals can potentially cause changes in the intrinsic properties of paper. The work presented here aimed to use Fourier transform infrared (FT-IR) spectroscopy to study paper surface sizing, namely, the penetration of the sizing chemicals into the paper structure. Two different surface sizing formulations were applied to paper produced from Eucalyptus globulus bleached pulp (reference paper): both contain 90% (w/w) cationic starch, but one contains 10% (w/w) poly(styrene-co-maleic anhydride) whereas the other contains 10% (w/w) poly(styrene-co-butyl acrylate). The surface-sized paper sheets were further manually delaminated, so that the top surfaces as well as the internal layers could be analyzed by FT-IR spectroscopy. A non-surface-sized sample was taken as the reference. From the spectroscopic results, it was possible to detect the presence of the copolymers on the paper top surfaces, despite the application of only small amounts of these chemicals in the surface sizing. However, the chemicals were not found in the layers closest to the surface (30−40 μm from the top), leading to the conclusion that the penetration of the sizing formulations into the fibrous matrix was insignificant (at least up to this distance). Infrared spectroscopy data also showed that the calcium carbonate added as a filler was always present at higher concentration in the analyzed inner layers than at the top surface, for the reference paper as well as the sized papers