Caractéristiques structurales et écologiques des phytocénoses forestières de la forêt classée d’itchèdè (département du plateau, sud-est bénin)

Notre étude phytosociologique a été menée dans la forêt classée d’Itchèdè (6°59’-7°00’N et 2°37’-2°38’ E). Elle a pour objectif de mieux connaître la forêt pour un meilleur suivi de sa dynamique en vue d’asseoir à terme, une base fiable de son aménagement et de sa gestion durable. Nous avons utilisé l’approche synusiale intégrée pour identifier et caractériser les communautés végétales. La topographie et les sols ont été étudiés à travers la mesure des pentes, l’appréciation de la texture tactile à travers des profils texturaux effectués sur 50 cm de profondeur, la descriptionde profils pédologiques complétée par des analyses d’échantillons de sol au laboratoire. L’étude des paramètres dendrométriques et sylvicoles s’est faite à l’intérieur de placettes circulaires couvrant chacune 0,0314 ha pour les plantations forestières et 0,0615 ha pour la forêt naturelle.Les résultats ont révélé la présence de six phytocénoses dont quatre phytocénoses non pionnières de sous-bois. Les caractéristiques dendrométriques des phytocénoses permettent de déduire que la forêt naturelle d’Itchèdè est une formation secondaire assez dégradée mais relativement riche en sujets de grands diamètres en comparaison avec les autres forêts du Bénin.Mots-clés : phytosociologie synusiale, phytocénoses, stations forestières, Itchèdè, BéninThe main purpose of the phytosociological study in Itchèdè forest reserve (6°59’ to 7°00’ N and 2°37’ to 2°38’ E) was to contribute to the sustainable management of the forest. Phytosociological survey was done using the synusial approach. Soils and topography were studied through textural profiles appreciation in the first 50 cm of the soil, pedological profiles description and laboratory analysis. Dendrometric and sivicultural parameters were studied inside circular plots of 0.0314 ha for plantations and 0.0615 ha for natural forest. The study revealed the existence of six plant-communities including four non pioneer plant-communities were identified and described. Based on dendrometric parameters of the natural forest, we assume that Itchèdè forest reserve is a secondary degraded forest but somewhat rich in trees with high diameters in comparison with other natural forest in Benin

Mobility Support in User-Centric Networks

In this paper, an overview of challenges and requirements for mobility management in user-centric networks is given, and a new distributed and dynamic per-application mobility management solution is presented. After a brief summary of generic mobility management concepts, existing approaches from the distributed and peer-to-peer mobility management literature are introduced, along with their applicability or shortcomings in the UCN environment. Possible approaches to deal with the decentralized and highly dynamic nature of UCNs are also provided with a discussion and an introduction to potential future work

Atomically dispersed Pt-N-4 sites as efficient and selective electrocatalysts for the chlorine evolution reaction

Chlorine evolution reaction (CER) is a critical anode reaction in chlor-alkali electrolysis. Although precious metal-based mixed metal oxides (MMOs) have been widely used as CER catalysts, they suffer from the concomitant generation of oxygen during the CER. Herein, we demonstrate that atomically dispersed Pt-N-4 sites doped on a carbon nanotube (Pt-1/CNT) can catalyse the CER with excellent activity and selectivity. The Pt-1/CNT catalyst shows superior CER activity to a Pt nanoparticle-based catalyst and a commercial Ru/Ir-based MMO catalyst. Notably, Pt-1/CNT exhibits near 100% CER selectivity even in acidic media, with low Cl- concentrations (0.1M), as well as in neutral media, whereas the MMO catalyst shows substantially lower CER selectivity. In situ electrochemical X-ray absorption spectroscopy reveals the direct adsorption of Cl- on Pt-N-4 sites during the CER. Density functional theory calculations suggest the PtN4C12 site as the most plausible active site structure for the CER

A review of the evolution of robotic-assisted total hip arthroplasty.

INTRODUCTION: Total hip arthroplasty (THA) is currently a very successful operation but continues to evolve as we try to perfect techniques and improve outcomes for our patients. Robotic hip surgery (RHS) began with the 'active' ROBODOC system in the 1980s. There were drawbacks associated with the original ROBODOC and most recently, the MAKO robot was introduced with early promising results. AIM: The aim of this paper is to provide an up-to-date review surrounding this area and discuss the pros and cons of this technique. METHODS: A literature review searching Medline, Embase, Ovidsp, Cochrane library, pubmed database and google scholar was performed searching keywords including: 'Robotic hip surgery', 'Robotic orthopaedic surgery', 'Computer assisted hip surgery', 'robotic arthroplasty', and 'computer assisted orthopaedic surgery'. CONCLUSION: Robotic hip surgery aims to tackle the limitations of the human factor in surgery by promising reproducible and reliable methods of component positioning in arthroplasty surgery. However, as orthopaedic surgeons, we must critically appraise all new technology and support the use providing there is sound robust evidence backing it

Accretion disc winds in tidal disruption events: Ultraviolet spectral lines as orientation indicators

ABSTRACT Some tidal disruption events (TDEs) exhibit blueshifted broad absorption lines (BALs) in their rest-frame ultraviolet (UV) spectra, while others display broad emission lines (BELs). Similar phenomenology is observed in quasars and accreting white dwarfs, where it can be interpreted as an orientation effect associated with line formation in an accretion disc wind. We propose and explore a similar unification scheme for TDEs. We present synthetic UV spectra for disc and wind-hosting TDEs, produced by a state-of-the-art Monte Carlo ionization and radiative transfer code. Our models cover a wide range of disc wind geometries and kinematics. Such winds naturally reproduce both BALs and BELs. In general, sightlines looking into the wind cone preferentially produce BALs, while other orientations preferentially produce BELs. We also study the effect of wind clumping and CNO-processed abundances on the observed spectra. Clumpy winds tend to produce stronger UV emission and absorption lines, because clumping increases both the emission measure and the abundances of the relevant ionic species, the latter by reducing the ionization state of the outflow. The main effect of adopting CNO-processed abundances is a weakening of C iv 1550 Å  and an enhancement of N v 1240 Å  in the spectra. We conclude that line formation in an accretion disc wind is a promising mechanism for explaining the diverse UV spectra of TDEs. If this is correct, the relative number of BAL and BEL TDEs can be used to estimate the covering factor of the outflow. The models in this work are publicly available online and upon request.</jats:p

Updated clinical recommendations for the use of tibolone in Asian women

Tibolone, which is indicated for the relief of climacteric symptoms and the prevention of osteoporosis in postmenopausal women, has a tissue-specific mode of action different to that of conventional hormone replacement therapy (HRT). A large proportion of Asian postmenopausal women experience symptoms that most frequently include musculoskeletal pain, insomnia, forgetfulness, hot flushes and sexual dysfunction, and there is a need to address their specific requirements. Recent studies show that, in comparison to HRT, tibolone is as effective in alleviating menopausal symptoms and preventing bone loss, has a greater positive effect on sexual dysfunction and is associated with less vaginal bleeding, but it is rarely mentioned in guidelines for menopausal treatment. Levels of awareness amongst women about treatments for menopausal symptoms vary between Asian countries but, even in countries where awareness is high, HRT usage is much lower than in the West. To provide a practical approach to the use of tibolone in Asian postmenopausal women, a panel of experts in the management of menopause from 11 Asia Pacific countries has developed recommendations for its use, based on the evidence from clinical studies published since 2005. However, as much of the clinical data reviewed are from international studies, the recommendations and the treatment algorithm presented here are widely applicable

Rapid generation of endogenously driven transcriptional reporters in cells through CRISPR/Cas9

CRISPR/Cas9 technologies have been employed for genome editing to achieve gene knockouts and knock-ins in somatic cells. Similarly, certain endogenous genes have been tagged with fluorescent proteins. Often, the detection of tagged proteins requires high expression and sophisticated tools such as confocal microscopy and flow cytometry. Therefore, a simple, sensitive and robust transcriptional reporter system driven by endogenous promoter for studies into transcriptional regulation is desirable. We report a CRISPR/Cas9-based methodology for rapidly integrating a firefly luciferase gene in somatic cells under the control of endogenous promoter, using the TGFβ-responsive gene PAI-1. Our strategy employed a polycistronic cassette containing a non-fused GFP protein to ensure the detection of transgene delivery and rapid isolation of positive clones. We demonstrate that firefly luciferase cDNA can be efficiently delivered downstream of the promoter of the TGFβ-responsive gene PAI-1. Using chemical and genetic regulators of TGFβ signalling, we show that it mimics the transcriptional regulation of endogenous PAI-1 expression. Our unique approach has the potential to expedite studies on transcription of any gene in the context of its native chromatin landscape in somatic cells, allowing for robust high-throughput chemical and genetic screens

Remodelling of a polypyrimidine tract-binding protein complex during apoptosis activates cellular IRESs.

Post-transcriptional control of gene expression is mediated by the interaction of RNA-binding proteins with their cognate mRNAs that specifically regulate their stability, localization and translation. mRNA-binding proteins are multifunctional and it has been proposed therefore that a combinatorial RNA-binding protein code exists that allows specific protein sub-complexes to control cytoplasmic gene expression under a range of pathophysiological conditions. We show that polypyrimidine tract-binding protein (PTB) is central to one such complex that forms in apoptotic cells. Thus, during apoptosis initiated by TNF-related apoptosis inducing ligand there is a change in the repertoire of RNA-binding proteins with which PTB interacts. We show that altering the cellular levels of PTB and its binding partners, either singly or in combination, is sufficient to directly change the rates of apoptosis with increased expression of PTB, YBX1, PSF and NONO/p54(nrb) accelerating this process. Mechanistically, we show that these proteins post-transcriptionally regulate gene expression, and therefore apoptotic rates, by interacting with and stimulating the activity of RNA elements (internal ribosome entry segments) found in mRNAs that are translated during apoptosis. Taken together, our data show that PTB function is controlled by a set of co-recruited proteins and importantly provide further evidence that it is possible to dictate cell fate by modulating cytoplasmic gene expression pathways alone

Simulating eddy current sensor outputs for blade tip timing

Blade tip timing is a contactless method used to monitor the vibration of blades in rotating machinery. Blade vibration and clearance are important diagnostic features for condition monitoring, including the detection of blade cracks. Eddy current sensors are a practical choice for blade tip timing and have been used extensively. As the data requirements from the timing measurement become more stringent and the systems become more complicated, including the use of multiple sensors, the ability to fully understand and optimize the measurement system becomes more important. This requires detailed modeling of eddy current sensors in the blade tip timing application; the current approaches often rely on experimental trials. Existing simulations for eddy current sensors have not considered the particular case of a blade rotating past the sensor. Hence, the novel aspect of this article is the development of a detailed quasi-static finite element model of the electro-magnetic field to simulate the integrated measured output of the sensor. This model is demonstrated by simulating the effect of tip clearance, blade geometry, and blade velocity on the output of the eddy current sensor. This allows an understanding of the sources of error in the blade time of arrival estimate and hence insight into the accuracy of the blade vibration measurement