Wetlands: Mechanisms For Treating Acid Mine Drainage

A great deal of attention has been given to wetlands in recent years. Research suggests that natural and/or constructed wetlands may play a valuable role in flood flow moderation, sediment retention and stabilization, and waste water treatment while providing habitat for game and nongame wildlife. Only within the last 10 years have wetlands received serious attention in the treatment of acid mine drainage (AMD)

Development and Deployment of a Bioreactor for the Removal of Sulfate and Manganese from Circumneutral Coal Mine Drainage

Surface mining, in the form of contour mining and mountain-top removal, is a common means for retrieving coal in the Appalachian Coal Belt region of Kentucky. Overburden or excess spoil generated by these two methods is placed in valley fills. Traditionally Constructed fills have been shown to adversely impact headwater ecosystems via stream burial and through alterations to the hydrology, sediment supply, water quality and biological composition of downstream reaches. Mine drainages emanating from the toe of valley fills often contain elevated levels of total dissolved solids and heavy metals. Drainage chemistry from Guy Cove, a valley fill located in eastern Kentucky, exhibited a mean pH of 6.5 and Fe, Mn and SO4 concentrations of 1.5, 14, and 1264 mg L-1, respectively. The objective of this research was to develop an anaerobic bioreactor for the purpose of reducing Mn and SO4 concentrations in the mine drainage. Development began with batch experiments that tested five different organic carbon sources and five different inorganic substrates. A synthetic mine drainage with a pH of 6.2 and Mn and SO4 concentrations of 90 and 1,500 mg/L, respectively, was used in the experiment. Manganese and SO4 removal varied widely between treatment matrices, with removal rates \u3c 10 to 100% for Mn and \u3c 10 to \u3e 80% for SO4. The substrate sources which provided the most treatment were hardwood mulch and biosolids combined with creek sediment. Subsequent experiments were performed using the synthetic mine drainage in small bioreactors (55 liter plastic tanks) filled with creek sediment with either hardwood mulch or biosolids, each replicated three times. Over a 65 day treatment period \u3e 90% of the Mn and 70% of the SO4 was removed. There were no statistical differences between the two organic substrates. Using this information, in-situ bioreactors consisting of two 5,500 liter plastic septic tanks filled with creek sediment, hardwood mulch and manure compost were installed at Guy Cove. Mine drainage was collected in a sump and conveyed through the inline bioreactors by gravity. Gate valves were used to control flow through the bioreactors. After a 10-month monitoring period, the in-situ bioreactors removed 12, 11, and 64% of Mn, SO4 and Fe from the drainage, respectively. Results from the field differed greatly from those observed under controlled laboratory conditions. Efforts to improve the efficiency of the in-situ bioreactors are underway

smart sustainable islands vs smart sustainable cities

This paper has several aims: a) the presentation of a critical analysis of the terms "smart sustainable cities" and "smart sustainable islands" b) the presentation of a number of principles towards to the development methodological framework of concepts and actions, in a form of a manual and actions guide, for the smartification and sustainability of islands. This kind of master plan is divided in thematic sectors (key factors) which concern the insular municipalities c) the creation of an island's smartification and sustainability index d) the first steps towards the creation of a portal for the presentation of our smartification actions manual, together with relative resources, smart applications examples, and, in the near future the first results of our index application in a number of Greek islands and e) the presentation of some proposals of possible actions towards their sustainable development and smartification for the municipalities - islands of Paros and Antiparos in Greece, as case studies

Effects on surface atmospheric photo-oxidants over Greece during the total solar eclipse event of 29 March 2006

International audienceThis study investigates the effects of the total solar eclipse of 29 March 2006 on surface air-quality levels over Greece based on observations at a number of sites in conjunction with chemical box modelling and 3-D air-quality modelling. Emphasis is given on surface ozone and other photooxidants at four Greek sites Kastelorizo, Finokalia (Crete), Pallini (Athens) and Thessaloniki, which are located at gradually increasing distances from the path of the eclipse totality and are characterized by different air pollution levels. The eclipse offered the opportunity to test our understanding of air pollution build-up and the response of the gas-phase chemistry of photo-oxidants during a photolytical perturbation using both a photochemical box model and a regional air-quality offline model based on the modeling system WRF/CAMx. At the relatively unpolluted sites of Kastelorizo and Finokalia no clear impact of the solar eclipse on surface O3, NO2 and NO concentrations can be deduced from the observations and model simulations as the calculated changes in net ozone production rates between eclipse and non eclipse conditions are rather small compared to the ozone variability and hence the solar eclipse effects on ozone can be easily masked by transport. At the polluted sites of Thessaloniki and Pallini, the solar eclipse effects on O3, NO2 and NO concentrations are clearly revealed from both the measurements and 3-D air-quality modeling with the net effect being a decrease in O3 and NO and an increase in NO2 as NO2 formed from the reaction of O3 with NO while at the same time NO2 is not efficiently photolysed. It is evident from the 3-D air quality modeling over Greece that the maximum effects of the eclipse on O3, NO2 and NO are reflected at the large urban agglomerations of Athens, and Thessaloniki where the maximum of the emissions occur

Characterization of Environmental Nano- and Macrocolloid Particles Extracted from Selected Soils and Biosolids

Environmental nanoparticles found in soil systems and biosolids may pose a considerable risk to groundwater quality as contaminant carriers. Little effort has been invested in the characterization of natural nanocolloids compared to corresponding macrocolloids. This study involved physicochemical, mineralogical, and morphological characterizations of nanocolloids and macrocolloids fractionated from three Kentucky soils and one biosolid. Particle size and morphology were investigated using scanning/transmission electron microscopy and dynamic light scattering. Mineralogical composition was determined by X-ray diffraction and thermogravimetric and Fourier-transform infrared spectroscopy analyses. Zeta potentials and cation exchange capacities assessed surface charge and chemical reactivity. The estimated average hydrodynamic diameter of nanoparticles was nearly twice the ideal 100 nm range, apparently due to irregular particle shapes and partial aggregation. Nanoparticles were also found attached to surfaces of macrocolloids, forming macro-nano aggregates and obscuring some of their physical and chemical characteristics. However, nanocolloids exhibited greater surface reactivity, likely due to their smaller size, poor crystallinity, and morphological shape distortions. In spite of some behavior modification due to nanoaggregation phenomena, nanocolloids appeared to be much more potent vectors of contaminant transport in subsurface environments than their macrosize fractions. Nevertheless, their heterogeneous nature brings to light important considerations in addressing pollution prevention and remediation challenges

Measurement of the Stray Light in the Advanced Virgo Input Mode Cleaner Cavity using an instrumented baffle

A new instrumented baffle was installed in Spring 2021 at Virgo surrounding the suspended mirror in the input mode cleaner triangular cavity. It serves as a demonstrator of the technology designed to instrument the baffles in the main arms in the near future. We present, for the first time, results on the measured scattered light distribution inside the cavity as determined by the new device using data collected between May and July 2021, with Virgo in commissioning phase and operating with an input laser power in the cavity of 28.5~W. The sensitivity of the baffle is discussed and the data is compared to scattered light simulations.Comment: 4 pages, 5 figures, 1 tabl

Fragipan Horizon Fragmentation in Slaking Experiments with Amendment Materials and Ryegrass Root Tissue Extracts

Slaking experiments were conducted of fragipan clods immersed in solutions of poultry manure, aerobically digested biosolid waste (ADB), fluidized bed combustion byproduct (FBC), D-H2O, CaCO3, NaF, Na-hexa-metaphosphate, and ryegrass root biomass. The fragipan clods were sampled from the Btx horizon of an Oxyaquic Fragiudalf in Kentucky. Wet sieving aggregate analysis showed significantly better fragmentation in the NaF, Na-hexa-metaphosphate, and ryegrass root solutions with a mean weight diameter range of 15.5–18.8 mm compared to the 44.2–47.9 mm of the poultry manure, ADB, and FBC treatments. Dissolved Si, Al, Fe, and Mn levels released in solution were ambiguous. The poor efficiency of the poultry manure, ADB, and FBC treatments was attributed to their high ionic strength, while the high efficiency of the NaF, Na-hexa-metaphosphate, and rye grass root solutions to their high sodium soluble ratio (SSR). A slaking mechanism is proposed suggesting that aqueous solutions with high SSR penetrate faster into the fragipan capillaries and generate the critical swelling pressure and shearing stress required to rupture the fragipan into several fragments. Additional fragmentation occurs in a followup stage during which potential Si, Al, Fe, and Mn binding agents may be released into solution. Field experiments testing these findings are in progress

An instrumented baffle for the Advanced Virgo Input Mode Cleaner End Mirror

A novel instrumented baffle surrounding the suspended end mirror in the input mode cleaner cavity of the Virgo interferometer was installed in spring 2021. Since then, the device has been regularly operated in the experiment and the obtained results indicate a good agreement with simulations of the stray light inside the optical cavity. The baffle will operate in the upcoming O4 observation run, serving as a demonstrator of the technology designed to instrument the baffles in front of the main mirrors in time for O5. In this paper we present a detailed description of the baffle design, including mechanics, front-end electronics, data acquisition, as well as optical and vacuum tests, calibration and installation procedures, and performance results.Comment: 12 pages, 21 figures, 3 tables, to be submitted to PR