Fatigue analysis-based numerical design of stamping tools made of cast iron

This work concerns stress and fatigue analysis of stamping tools made of cast iron with an essentially pearlitic matrix and containing foundry defects. Our approach consists at first, in coupling the stamping numerical processing simulations and structure analysis in order to improve the tool stiffness geometry for minimizing the stress state and optimizing their fatigue lifetime. The method consists in simulating the stamping process by considering the tool as a perfect rigid body. The estimated contact pressure is then used as boundary condition for FEM structure loading analysis of the tool. The result of this analysis is compared with the critical stress limit depending on the automotive model. The acceptance of this test allows calculating the fatigue lifetime of the critical zone by using the S–N curve of corresponding load ratio. If the prescribed tool life requirements are not satisfied, then the critical region of the tool is redesigned and the whole simulation procedures are reactivated. This method is applied for a cast iron EN-GJS-600-3. The stress-failure (S–N) curves for this material is determined at room temperature under push pull loading with different load ratios R0σmin/σmax0−2, R0−1 and R00.1. The effects of the foundry defects are determined by SEM observations of crack initiation sites. Their presence in tested specimens is associated with a reduction of fatigue lifetime by a factor of 2. However, the effect of the load ratio is more important

Geometric observation for the Bures fidelity between two states of a qubit

In this Brief Report, we present a geometric observation for the Bures fidelity between two states of a qubit.Comment: 4 pages, 1 figure, RevTex, Accepted by Phys. Rev.

A novel approach to computer-aided diagnosis of mammographic images

This is a work-in-progress report of a research endeavor that deals with the design and development of a novel approach to computer-aided diagnosis (CAD) of mammographic images. With the initial emphasis being on the analysis of microcalcifications, the proposed approach defines a synergistic paradigm that utilizes new methodologies together with previously developed techniques. The new paradigm is intended to promote a higher degree of accuracy in CAD of mammograms with an increased overall throughput. The process of accomplishing these goals is initiated by the fractal encoding of the input image, which gives rise to the generation of focus-of-attention regions (FARs), that is, regions that contain anomalies. The primary thrust of this work is to demonstrate that by considering FARs, rather than the entire input image, the performances of the ensuing processes (i.e., segmentation, feature extraction, and classification) are enhanced in terms of accuracy and speed. After presenting the proposed approach to CAD of mammographic images, the paper describes the generation of FARs. Furthermore, an experimental study is included that demonstrates the impact of this front-end procedure on the process of microcalcification segmentation. Specifically, the experimentation reveals a dramatic decrease (increase) in the amount of input data (throughput), as well as a reduction in the number of false detections

Electron g-Factor Anisotropy in Symmetric (110)-oriented GaAs Quantum Wells

We demonstrate by spin quantum beat spectroscopy that in undoped symmetric (110)-oriented GaAs/AlGaAs single quantum wells even a symmetric spatial envelope wavefunction gives rise to an asymmetric in-plane electron Land\'e-g-factor. The anisotropy is neither a direct consequence of the asymmetric in-plane Dresselhaus splitting nor of the asymmetric Zeeman splitting of the hole bands but is a pure higher order effect that exists as well for diamond type lattices. The measurements for various well widths are very well described within 14 x 14 band k.p theory and illustrate that the electron spin is an excellent meter variable to map out the internal -otherwise hidden- symmetries in two dimensional systems. Fourth order perturbation theory yields an analytical expression for the strength of the g-factor anisotropy, providing a qualitative understanding of the observed effects

Pressure-sensitive paint measurements in a shock tube

Abstract Surface pressures were measured in the shortduration, transient flow environment of a small-scale, low pressure-ratio shock tube using thin-film pressure-sensitive paint (PSP). Issues regarding coating formulation, measurement uncertainty, optical system design, and temperature and illumination compensation are discussed. The pressure measurements were acquired during steady flow conditions following the passage of normal shocks and expansion regions along a flat sidewall and a wedge sidewall. The PSP characteristic response time was 3 to 6 ms. Overall pressure uncertainty for the shock tube measurements ranged up to 5% over one atmosphere and compared well with theoretical estimates of uncertainty

Frictional drag between quantum wells mediated by phonon exchange

We use the Kubo formalism to evaluate the contribution of acoustic phonon exchange to the frictional drag between nearby two-dimensional electron systems. In the case of free phonons, we find a divergent drag rate ($\tau_{D}^{-1}$). However, $\tau_{D}^{-1}$ becomes finite when phonon scattering from either lattice imperfections or electronic excitations is accounted for. In the case of GaAs quantum wells, we find that for a phonon mean free path $\ell_{ph}$ smaller than a critical value, imperfection scattering dominates and the drag rate varies as $ln (\ell_{ph}/d)$ over many orders of magnitude of the layer separation $d$. When $\ell_{ph}$ exceeds the critical value, the drag rate is dominated by coupling through an electron-phonon collective mode localized in the vicinity of the electron layers. We argue that the coupled electron-phonon mode may be observable for realistic parameters. Our theory is in good agreement with experimental results for the temperature, density, and $d$-dependence of the drag rate.Comment: 45 pages, LaTeX, 8 postscript file figure

Cauchy boundaries in linearized gravitational theory

We investigate the numerical stability of Cauchy evolution of linearized gravitational theory in a 3-dimensional bounded domain. Criteria of robust stability are proposed, developed into a testbed and used to study various evolution-boundary algorithms. We construct a standard explicit finite difference code which solves the unconstrained linearized Einstein equations in the 3+1 formulation and measure its stability properties under Dirichlet, Neumann and Sommerfeld boundary conditions. We demonstrate the robust stability of a specific evolution-boundary algorithm under random constraint violating initial data and random boundary data.Comment: 23 pages including 3 figures and 2 tables, revte