64 research outputs found
Shot peening effect on surface properties and pitting corrosion resistance of biomedical structural steel AISI 316L
AISI 316L is used in biomedical engineering as bone implant materials. The mechanical properties and corrosion resistance of this material can be improved by shot peening. The aim of this research is to investigate the effect of shot peening on surface roughness, hardness, wettability, and pitting corrosion resistance of AISI 316L in 0,9 % NaCl solution. The shot-peening was performed on AISI 316L surfaces with duration of 0, 2, 4, 10, 20, 30 minutes using steel balls with a diameter of 0,6 mm and hardness of 40 - 50 HRC. The results show that shot peening increase roughness after 2 minutes then decrease the roughness with increasing time. The longer duration of shot peening will increase the pitting corrosion resistance
Deposition of fluoride on enamel surfaces released from varnishes is limited to vicinity of fluoridation site
The aim of the in-situ study was to determine fluoride uptake in non-fluoridated, demineralized enamel after application of fluoride varnishes on enamel samples located at various distances from the non-fluoridated samples. All enamel samples used were demineralized with acidic hydroxyethylcellulose before the experiment. Intra-oral appliances were worn by ten volunteers in three series: (1, Mirafluorid, 0.15% F; 2, Duraphat, 2.3% F and 3, unfluoridated controls) of 6days each. Each two enamel samples were prepared from 30 bovine incisors. One sample was used for the determination of baseline fluoride content (BFC); the other was treated according to the respective series and fixed in the intra-oral appliance for 6days. Additionally, from 120 incisors, each four enamel samples were prepared (one for BFC). Three samples (a-c) were placed into each appliance at different sites: (a) directly neighboured to the fluoridated specimen (=next), (b) at 1-cm distance (=1cm) and (c) in the opposite buccal aspect of the appliance (=opposite). At these sites, new unfluoridated samples were placed at days 1, 3 and 5, which were left in place for 1day. The volunteers brushed their teeth and the samples with fluoridated toothpaste twice per day. Both the KOH-soluble and structurally bound fluoride were determined in all samples to determine fluoride uptake and were statistically analyzed. One day, after fluoridation with Duraphat, KOH-soluble fluoride uptake in specimen a (=next) was significantly higher compared to the corresponding samples of both the control and Mirafluorid series, which in turn were not significantly different from each other. At all other sites and time points, fluoride uptake in the enamel samples were not different from controls for both fluoride varnishes. Within the first day after application, intra-oral-fluoride release from the tested fluoride varnish Duraphat leads to KOH-soluble fluoride uptake only in enamel samples located in close vicinity to the fluoridation sit
PERILAKU KONSUMEN DALAM BERBELANJA PAKAIAN WANITA DI PASAR PAGI SAMARINDA
Konsumen sebagai individu memiliki kriteria dan kondisi yang berbeda satu sama lainnya dan perbedaan ini pula yang menyebabkan kompleksnya perilaku konsumen. Secara umum bagaimana konsumen berprilaku yang dipengaruhi oleh faktor internal dan faktor eksternal. Faktor internal adalah faktor yang ada pada diri konsumen itu sendiri. Sedangkan faktor eksternal merupakan faktor yang ada dari luar diri konsum
Investigation of the new cataclysmic variable 1RXS J180834.7+101041
We present the results of our photometric and spectroscopic studies of the
new eclipsing cataclysmic variable star 1RXS J180834.7+101041. Its spectrum
exhibits double-peaked hydrogen and helium emission lines. The Doppler maps
constructed from hydrogen lines show a nonuniform distribution of emission in
the disk similar to that observed in IP Peg. This suggests that the object can
be a cataclysmic variable with tidal density waves in the disk. We have
determined the component masses (M_WD =0.8 \pm 0.22 M_sun and M_RD =0.14 \pm
0.02 M_sun) and the binary inclination (i =78 \pm 1.5 deg) based on well-known
relations between parameters for cataclysmic variable stars. We have modeled
the binary light curves and showed that the model of a disk with two spots is
capable of explaining the main observed features of the light curves.Comment: 22 pages, 9 figures, 2 tables, published in Astronomy Letters, 2011,
37, 845-85
Isospin-Violating Meson-Nucleon Vertices as an Alternate Mechanism of Charge-Symmetry Breaking
We compute isospin-violating meson-nucleon coupling constants and their
consequent charge-symmetry-breaking nucleon-nucleon potentials. The couplings
result from evaluating matrix elements of quark currents between nucleon states
in a nonrelativistic constituent quark model; the isospin violations arise from
the difference in the up and down constituent quark masses. We find, in
particular, that isospin violation in the omega-meson--nucleon vertex dominates
the class IV CSB potential obtained from these considerations. We evaluate the
resulting spin-singlet--triplet mixing angles, the quantities germane to the
difference of neutron and proton analyzing powers measured in elastic
scattering, and find them commensurate to those computed
originally using the on-shell value of the - mixing amplitude.
The use of the on-shell - mixing amplitude at has been
called into question; rather, the amplitude is zero in a wide class of models.
Our model possesses no contribution from - mixing at , and
we find that omega-meson exchange suffices to explain the measured
analyzing power difference~at~183 MeV.Comment: 20 pages, revtex, 3 uuencoded PostScript figure
Bilkent University at TRECVID 2007
We describe our fourth participation, that includes two high-level feature extraction runs, and one manual search run, to the TRECVID video retrieval evaluation. All of these runs have used a system trained on the common development collection. Only visual information, consisting of color, texture and edge-based low-level features, was used
Menanti Cahaya Diujung Senja (Sebuah Catatan dari Negeri Tallasa)
Dalam menjalankan tugas-tugaspengabdian ini, pihak universitas memberikan tugas pokok kepada Lembaga Penelitian dan Pengabdian kepada Masyarakat (LP2M), khususnya pada Pusat Pengabdian kepada Masyarakat (PPM)
Deposition of fluoride on enamel surfaces released from varnishes is limited to vicinity of fluoridation site
The aim of the in-situ study was to determine fluoride uptake in non-fluoridated, demineralized enamel after application of fluoride varnishes on enamel samples located at various distances from the non-fluoridated samples. All enamel samples used were demineralized with acidic hydroxyethylcellulose before the experiment. Intra-oral appliances were worn by ten volunteers in three series: (1, Mirafluorid, 0.15% F; 2, Duraphat, 2.3% F and 3, unfluoridated controls) of 6Â days each. Each two enamel samples were prepared from 30 bovine incisors. One sample was used for the determination of baseline fluoride content (BFC); the other was treated according to the respective series and fixed in the intra-oral appliance for 6Â days. Additionally, from 120 incisors, each four enamel samples were prepared (one for BFC). Three samples (aâc) were placed into each appliance at different sites: (a) directly neighboured to the fluoridated specimen (=next), (b) at 1-cm distance (=1Â cm) and (c) in the opposite buccal aspect of the appliance (=opposite). At these sites, new unfluoridated samples were placed at days 1, 3 and 5, which were left in place for 1Â day. The volunteers brushed their teeth and the samples with fluoridated toothpaste twice per day. Both the KOH-soluble and structurally bound fluoride were determined in all samples to determine fluoride uptake and were statistically analyzed. One day, after fluoridation with Duraphat, KOH-soluble fluoride uptake in specimen a (=next) was significantly higher compared to the corresponding samples of both the control and Mirafluorid series, which in turn were not significantly different from each other. At all other sites and time points, fluoride uptake in the enamel samples were not different from controls for both fluoride varnishes. Within the first day after application, intra-oral-fluoride release from the tested fluoride varnish Duraphat leads to KOH-soluble fluoride uptake only in enamel samples located in close vicinity to the fluoridation site
The correlation between endometrial thickness and outcome of in vitro fertilization and embryo transfer (IVF-ET) outcome
<p>Abstract</p> <p>Background</p> <p>To evaluate the relationship between endometrial thickness on day of human chorionic gonadotrophin administration (hCG) and pregnancy outcome in a large number of consecutive in vitro fertilization and embryo transfer (IVF-ET) cycles.</p> <p>Methods</p> <p>A retrospective cohort study including all patients who had IVF-ET from January 2003âDecember 2005 conducted at a tertiary center.</p> <p>Results</p> <p>A total of 2464 cycles were analysed. Pregnancy rate (PR) was 35.8%. PR increased linearly (r = 0.864) from 29.4% among patients with a lining of less than or equal to 6 mm, to 44.4% among patients with a lining of greater than or equal to 17 mm. ROC showed that endometrial thickness is not a good predictor of PR, so a definite cut-off value could not be established (AUC = 0.55).</p> <p>Conclusion</p> <p>There is a positive linear relationship between the endometrial thickness measured on the day of hCG injection and PR, and is independent of other variables. Hence aiming for a thicker endometrium should be considered.</p
The COST292 experimental framework for TRECVID 2007
In this paper, we give an overview of the four tasks submitted to TRECVID 2007 by COST292. In shot boundary (SB) detection task, four SB detectors have been developed and the results are merged using two merging algorithms. The framework developed for the high-level feature extraction task comprises four systems. The first system transforms a set of low-level descriptors into the semantic space using
Latent Semantic Analysis and utilises neural networks for feature detection. The second system uses a Bayesian classifier trained with a âbag of subregionsâ. The third system uses a multi-modal classifier based on SVMs and several descriptors. The fourth system uses two image classifiers based on ant colony optimisation and particle swarm optimisation respectively. The system submitted to the search task is
an interactive retrieval application combining retrieval functionalities in various modalities with a user interface supporting automatic and interactive search over all queries submitted. Finally, the rushes task submission is based on a video summarisation and browsing system comprising two different interest curve algorithms and three features
- âŠ