A Deeper Insight into Strain for the Sila-bi[6]prismane (Si\u3csub\u3e18\u3c/sub\u3eH\u3csub\u3e12\u3c/sub\u3e) Cluster with its Endohedrally Trapped Silicon Atom, Si\u3csub\u3e19\u3c/sub\u3eH\u3csub\u3e12\u3c/sub\u3e

A new family of over-coordinated hydrogenated silicon nanoclusters with outstanding optical and mechanical properties has recently been proposed. For one member of this family, namely the highly symmetric Si19H12 nanocrystal, strain calculations have been presented with the goal to question its thermal stability and the underlying mechanism of ultrastability and electron-deficiency aromaticity. Here, the invalidity of these strain energy (SE) calculations is demonstrated mainly based on a fundamentally wrong usage of homodesmotic reactions, the miscounting of atomic bonds, and arithmetic errors. Since the article in question is entirely anchored on those erroneous SE values, all of its conclusions and predictions become without meaning. We provide evidence here that the nanocrystal in question suffers from such low levels of strain that its thermodynamical stability should be largely sufficient for device fabrication in a realistic plasma reactor. Most remarkably, the two “alternative,” irregular isomers explicitly proposed in the aforementioned article are also electron-deficient, nontetrahedral, ultrastable, and aromatic nicely underlining the universality of the ultrastability concept for nanometric hydrogenated silicon clusters. © 2015 Wiley Periodicals, Inc

DEVELOPMENT OF THE NEW EDUCATIONAL CONTENT “SMALL UAS IN CIVIL ENGINEERING APPLICATION SCENARIOS”

The key point of this paper is presentation of the main idea and some results of the project “Small UAS in civil engineering application scenarios” (SUAS-CAS). This project was proposed by newly established in 2016 ISPRS WG V/7: “Innovative Technologies in Training Civil Engineers and Architects”. Here we are presenting our experience in using low-cost UAS in training architects at Kyiv National University of Construction and Architecture, which was chosen as basic for this project. In the first part of paper, the project outline is presented. Then the first and possible follow project outcomes were described. In some details is described the training module “Small UAS in architecture” which was developed and included as a part of the subject “Architectural photogrammetry”

NEW TRENDS IN GIS AND BIM FOR FACILITY MANAGEMENT IN THE CZECH REPUBLIC

Most of the state bureaus and ministries in the Czech Republic are located in the capital city Prague. The buildings are situated mostly in historical part of the city, where are high demands on compliance with the cultural heritage laws. Currently, the buildings are in unsatisfactory building conditions, their maintenance is expensive and due to complicated legislation and political processes the buildings are in a state of “permanent repairs”. More than twenty years our company operates and co-develops GIS/BIM application for facility management of administrative buildings in the Czech Republic. The main topics of this contribution is to present our general experiences in GIS and BIM development which is based on our concrete cases dealt with Czech ministries, to present basic legislation requirements in Czech facility management and to evaluate current trends in the field of GIS and BIM for facility management in the Czech Republic in response to other official state registries

USAGE OF PHOTOGRAMMETRIC PROCESSING OF THERMAL IMAGES FOR CIVIL ENGINEERS

In climate conditions of the Czech Republic is getting more important to carry out thermal inspection during documentation and inventory of buildings. Capturing and photogrammetric processing of thermal images requires special photogrammetric approaches especially because of low thermal image resolution. Part of this paper is focused on photogrammetric processing of thermal images using different methods with different 2D and 3D results which help civil engineers and architects better interpretation of thermal imaging. Those results are presented on chosen test objects. Photogrammetric results are also analysed in terms of geometric accuracy. The importance of integration of 2D and 3D results to GIS and BIM for facility management is discussed in final part of the paper

Clinical Outcomes of Zirconia Dental Implants: A Systematic Review

To determine the survival rate and marginal bone loss (MBL) of zirconia dental implants restored with single crowns or fixed dental prostheses. An electronic search was conducted up to November 2015 (without any restriction regarding the publication time) through the databases MEDLINE (PubMed), Cochrane Library, and EMBASE to identify randomized controlled clinical trials and prospective clinical trials including >15 patients. Primary outcomes were survival rate and MBL. Furthermore, the influence of several covariates on MBL was evaluated. Qualitative assessment and statistical analyses were performed. This review was conducted according to preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines for systematic reviews. With the applied search strategy, 4,196 titles could be identified. After a screening procedure, 2 randomized controlled clinical trials and 7 prospective clinical trials remained for analyses. In these trials, a total of 326 patients received 398 implants. The follow-up ranged from 12 to 60 mo. Implant loss was mostly reported within the first year, especially within the healing period. Thereafter, nearly constant survival curves could be observed. Therefore, separate meta-analyses were performed for the first and subsequent years, resulting in an implant survival rate of 95.6% (95% confidence interval: 93.3% to 97.9%) after 12 mo and, thereafter, an expected decrease of 0.05% per year (0.25% after 5 y). Additionally, a meta-analysis was conducted for the mean MBL after 12 mo, resulting in 0.79 mm (95% confidence interval: 0.73 to 0.86 mm). Implant bulk material and design, restoration type, and the application of minor augmentation procedures during surgery, as well as the modes of temporization and loading, had no statistically significant influence on MBL. The short-term cumulative survival rates and the MBL of zirconia implants in the presented systematic review are promising. However, additional data are still needed to confirm the long-term predictability of these implants

Impact of availability of guidelines and active surveillance in reducing the incidence of ventilator-associated pneumonia in Europe and worldwide

Background: To analyse whether the availability of written standards for management of mechanically ventilated patients and/or the existence of a surveillance system for cases of ventilation-associated pneumonia (VAP) are positively associated with compliance with 6 well-established VAP prevention measures. Methods: Ecological study based on responses to an online-questionnaire completed by 1730 critical care physicians. Replies were received from 77 different countries, of which the majority, i.e. 1351, came from 36 European countries. Results: On a cross-country level, compliance with VAP prevention measures is higher in countries with a large number of prevention standards and/or VAP surveillance systems in place at ICU level., Likewise, implementation of standards and VAP surveillance systems has a significant impact on self-reported total compliance with VAP prevention measures (both p < 0.001). Moreover, predictions of overall prevention measure compliance show the effect size of the availability of written standards and existence of surveillance system. For instance, a female physician with 10 years of experience in critical care working in a 15-bed ICU in France has a predicted baseline level of VAP prevention measure compliance of 63 per cent. This baseline level increases by 9.5 percentage points (p < 0.001) if a written clinical VAP prevention standard is available in the ICU, and by another 4 percentage points (p < 0.001) if complemented by a VAP surveillance system. Conclusions: The existence of written standards for management of mechanically ventilated patients in an ICU and the availability of VAP surveillance systems have shown to be positively associated with compliance with VAP prevention measures and should be fostered on a policy level

The impact of post-procedural complications on reimbursement, length of stay and mechanical ventilation among patients undergoing transcatheter aortic valve implantation in Germany

BACKGROUND: The impact of various post-procedural complications after transcatheter aortic valve implantation (TAVI) on resource use and their consequences in the German reimbursement system has still not been properly quantified. METHODS: In a retrospective observational study, we use data from the German DRG statistic on patient characteristics and in-hospital outcomes of all isolated TAVI procedures in 2013 (N = 9147). The impact of post-procedural complications on reimbursement, length of stay and mechanical ventilation was analyzed using both unadjusted and risk-adjusted linear and logistic regression analyses. RESULTS: A total of 235 (2.57%) strokes, 583 (6.37%) bleeding events, 474 (5.18%) cases of acute kidney injury and 1428 (15.61%) pacemaker implantations were documented. The predicted reimbursement of an uncomplicated TAVI procedure was €33,272, and bleeding events were associated with highest additional reimbursement (€12,839, p 48 h: OR 6.93, p 48 h: OR 5.73, p < 0.001). Pacemaker implantations, in contrast, were associated with comparably small increases in reimbursement (€662, p = 0.006) and length of stay (3.54 days, p = 0.006) and no impaired likelihood of mechanical ventilation more than 48 h (OR 1.22, p = 0.156). Interestingly, these complication-related consequences remain mostly unchanged after baseline risk-adjustment. CONCLUSIONS: Post procedural complications such as bleeding events, acute kidney injuries and strokes are associated with increased resource use and substantial amounts of additional reimbursement in Germany, which has important implications for decision making outside of the usual clinical sphere

Test-retest repeatability of child's respiratory symptoms and perceived indoor air quality - comparing self-and parent-administered questionnaires

Background: Questionnaires can be used to assess perceived indoor air quality and symptoms in schools. Questionnaires for primary school aged children have traditionally been parent-administered, but self-administered questionnaires would be easier to administer and may yield as good, if not better, information. Our aim was to compare the repeatability of self- and parent-administered indoor air questionnaires designed for primary school aged pupils. Methods: Indoor air questionnaire with questions on child's symptoms and perceived indoor air quality in schools was sent to parents of pupils aged 7-12 years in two schools and again after two weeks. Slightly modified version of the questionnaire was administered to pupils aged 9-12 years in another two schools and repeated after a week. 351 (52%) parents and 319 pupils (86%) answered both the first and the second questionnaire. Test-retest repeatability was assessed with intra-class correlation (ICC) and Cohen's kappa coefficients (k). Results: Test-retest repeatability was generally between 0.4-0.7 (ICC; k) in both self-and parent-administered questionnaire. In majority of the questions on symptoms and perceived indoor air quality test-retest repeatability was at the same level or slightly better in self-administered compared to parent-administered questionnaire. Agreement of self-and parent administered questionnaires was generally <0.4 (ICC; k) in reported symptoms and 0.4-0.6 (ICC; k) in perceived indoor air quality. Conclusions: Children aged 9-12 years can give as, or even more, repeatable information about their respiratory symptoms and perceived indoor air quality than their parents. Therefore, it may be possible to use self-administered questionnaires in future studies also with children.Peer reviewe