844 research outputs found
Atomistic Simulation of Crystal Change and Carbon Diffusion during Drawing of Pearlitic Steel Nano-sizedWire
Wire drawing is an efficient material processing technique for metals. Pearlitic steel is recognized as one of the most reliable and strong wire materials for industrial use. The microstructure of the pearlite phase, however, is quite complicated, with a lamellar structure containing alternating nanometer-thick layers of ferrite and cementite. In the present study, three-dimensional wire drawing models for pearlitic steel, in which a cementite layer occupies one half or one third of the wire cross section, are used in molecular dynamics simulations of the Fe-C system based on a pairwise potential. The results indicate that a body-centered cubic to face-centered cubic phase transition occurs in the ferrite layer during drawing. It is found that compressive hydrostatic stress is required to drive this phase transformation. The phase transition is followed by the formation of dislocations and grain boundaries. Cementite has an orthorhombic crystal structure and is more difficult to plastically deform than pure ferrite. During drawing of a pearlite wire, the large deformation of the ferrite layer compensates for the poor deformability of the cementite layer. The carbon content is important in pearlitic steel because carbon atoms can diffuse through all phases. As a indicator of the amount of carbon diffusion, the mean square displacement of carbon atoms is used. It is found that diffusion perpendicular to the ferrite/cementite interface tends to take place suddenly, but the total amount of diffusion is still less than that in the parallel direction
Ultrafast spin-flip exciton conversion and narrowband sky-blue luminescence in a fused polycyclic selenaborin emitter
Thermally activated delayed fluorescence (TADF) materials with high photoluminescence quantum yields and fast reverse intersystem crossing (RISC) capabilities are highly desirable for applications in high-efficiency organic light-emitting diodes. Herein, we report the synthesis as well as structural and photophysical properties of 5,9-diselena-13b-boranaphtho[3,2,1-de]anthracene (SeBSe) as a narrowband-emissive TADF material. The incorporation of two selenium atoms into the boron-fused pentacyclic Ï-core results in a small singletâtriplet energy gap (ÎEST) and thereby significant TADF properties. Moreover, theoretical calculations revealed a noticeable spin-orbit coupling enhancement between the singlet and triplet manifolds in SeBSe by virtue of the heavy-atom effect of selenium atoms. Consequently, SeBSe allows ultrafast spin-flip RISC with the rate constant surpassing 108 sâ1, which far exceeds the corresponding fluorescence radiative decay rate (âŒ106 sâ1), enabling an ideal singletâtriplet superimposed excited state
PPARα contributes to protection against metabolic and inflammatory derangements associated with acute kidney injury in experimental sepsis
Abstract Sepsisâassociated acute kidney injury (AKI) is a significant problem in critically ill children and adults resulting in increased morbidity and mortality. Fundamental mechanisms contributing to sepsisâassociated AKI are poorly understood. Previous research has demonstrated that peroxisome proliferatorâactivated receptor α (PPARα) expression is associated with reduced organ system failure in sepsis. Using an experimental model of polymicrobial sepsis, we demonstrate that mice deficient in PPARα have worse kidney function, which is likely related to reduced fatty acid oxidation and increased inflammation. Ultrastructural evaluation with electron microscopy reveals that the proximal convoluted tubule is specifically injured in septic PPARα deficient mice. In this experimental group, serum metabolomic analysis reveals unanticipated metabolic derangements in tryptophanâkynurenineâNAD+ and pantothenate pathways. We also show that a subgroup of children with sepsis whose genomeâwide expression profiles are characterized by repression of the PPARα signaling pathway has increased incidence of severe AKI. These findings point toward interesting associations between sepsisâassociated AKI and PPARαâdriven fatty acid metabolism that merit further investigation
Development of the basal hypothalamus through anisotropic growth
The adult hypothalamus is subdivided into distinct domains: preâoptic, anterior, tuberal and mammillary. Each domain harbours an array of neurones that act together to regulate homeostasis. The embryonic origins and the development of hypothalamic neurones, however, remain enigmatic. Here, we summarise recent studies in model organisms that challenge current views of hypothalamic development, which traditionally have attempted to map adult domains to correspondingly located embryonic domains. Instead, new studies indicate that hypothalamic neurones arise from progenitor cells that undergo anisotropic growth, expanding to a greater extent than other progenitors, and grow in different dimensions. We describe in particular how a multipotent Shh/Fgf10âexpressing progenitor population gives rise to progenitors throughout the basal hypothalamus that grow anisotropically and sequentially: first, a subset displaced rostrally give rise to anteriorâventral/tuberal neuronal progenitors; then a subset displaced caudally give rise to mammillary neuronal progenitors; and, finally, a subset(s) displaced ventrally give rise to tuberal infundibular glial progenitors. As this occurs, stable populations of Shh+ive and Fgf10+ive progenitors form. We describe current understanding of the mechanisms that induce Shh+ive/Fgf10+ive progenitors and begin to direct their differentiation to anteriorâventral/tuberal neuronal progenitors, mammillary neuronal progenitors and tuberal infundibular progenitors. Taken together, these studies suggest a new model for hypothalamic development that we term the âanisotropic growth modelâ. We discuss the implications of the model for understanding the origins of adult hypothalamic neurones
Color and gloss constancy under diverse lighting environments
When we look at an object, we simultaneously see how glossy or matte it is, how light or dark, and what color. Yet, at each point on the object's surface, both diffuse and specular reflections are mixed in different proportions, resulting in substantial spatial chromatic and luminance variations. To further complicate matters, this pattern changes radically when the object is viewed under different lighting conditions. The purpose of this study was to simultaneously measure our ability to judge color and gloss using an image set capturing diverse object and illuminant properties. Participants adjusted the hue, lightness, chroma, and specular reflectance of a reference object so that it appeared to be made of the same material as a test object. Critically, the two objects were presented under different lighting environments. We found that hue matches were highly accurate, except for under a chromatically atypical illuminant. Chroma and lightness constancy were generally poor, but these failures correlated well with simple image statistics. Gloss constancy was particularly poor, and these failures were only partially explained by reflection contrast. Importantly, across all measures, participants were highly consistent with one another in their deviations from constancy. Although color and gloss constancy hold well in simple conditions, the variety of lighting and shape in the real world presents significant challenges to our visual system's ability to judge intrinsic material properties
Body Design Of Tendon-Driven Jumping Robot Using Single Actuator And Wire Set
Although a mechanism in which a single actuator and a wire passing through pulleys drive the joints is a strong candidate for realizing the dynamic behavior because of its appropriate weight and simple mechanism, the problem arises that the position of the pulley influences the dynamic behavior. This paper is focused on vertical jumping. In our research, we searched an appropriate set of positions of a pulley considering the practical development of the robot and derived the relationship between the position of the pulley and the force on the tips of the robot’s foot for jumping. Simulation results suggest the possibility that some sets of positions allow an error in the attachment of the pulley, and the derived relationship indicates that the ratio of the pulling force of wire and vertical force on the ground strongly constrain the position of the pulley
Recommended from our members
Implementation of earlier antibiotic administration in patients with severe sepsis and septic shock in Japan: a descriptive analysis of a prospective observational study.
BACKGROUND: Time to antibiotic administration is a key element in sepsis care; however, it is difficult to implement sepsis care bundles. Additionally, sepsis is different from other emergent conditions including acute coronary syndrome, stroke, or trauma. We aimed to describe the association between time to antibiotic administration and outcomes in patients with severe sepsis and septic shock in Japan. METHODS: This prospective observational study enrolled 1184 adult patients diagnosed with severe sepsis based on the Sepsis-2 criteria and admitted to 59 intensive care units (ICUs) in Japan between January 1, 2016, and March 31, 2017, as the sepsis cohort of the Focused Outcomes Research in Emergency Care in Acute Respiratory Distress Syndrome, Sepsis and Trauma (FORECAST) study. We compared the characteristics and in-hospital mortality of patients administered with antibiotics at varying durations after sepsis recognition, i.e., 0-60, 61-120, 121-180, 181-240, 241-360, and 361-1440âmin, and estimated the impact of antibiotic timing on risk-adjusted in-hospital mortality using the generalized estimating equation model (GEE) with an exchangeable, within-group correlation matrix, with "hospital" as the grouping variable. RESULTS: Data from 1124 patients in 54 hospitals were used for analyses. Of these, 30.5% and 73.9% received antibiotics within 1âh and 3âh, respectively. Overall, the median time to antibiotic administration was 102âmin [interquartile range (IQR), 55-189]. Compared with patients diagnosed in the emergency department [90âmin (IQR, 48-164âmin)], time to antibiotic administration was shortest in patients diagnosed in ICUs [60âmin (39-180âmin)] and longest in patients transferred from wards [120âmin (62-226)]. Overall crude mortality was 23.4%, where patients in the 0-60âmin group had the highest mortality (28.0%) and a risk-adjusted mortality rate [28.7% (95% CI 23.3-34.1%)], whereas those in the 61-120âmin group had the lowest mortality (20.2%) and risk-adjusted mortality rates [21.6% (95% CI 16.5-26.6%)]. Differences in mortality were noted only between the 0-60âmin and 61-120âmin groups. CONCLUSIONS: We could not find any association between earlier antibiotic administration and reduction in in-hospital mortality in patients with severe sepsis
- âŠ