Prevalence of feline immunodeficiency virus and Toxoplasma gondii in Feral Cats on St. Kitts, West Indies

Toxoplasma gondii (T. gondii) is a cosmopolitan protozoan parasite that infects all warm-blooded species including humans. The definitive hosts of T. gondii are felid vertebrates including the domestic cat. Domestic cats shed oocysts for approximately two weeks in their feces after the primary infection. It has been shown that feline immunodeficiency virus (FIV) positive cats have a higher prevalence of and a higher titer of antibodies to T. gondii than those of FIV-negative cats. The main purposes of this study were to determine FIV prevalence and to investigate the oocysts shedding in FIV-positive and FIV-negative feral cats on St. Kitts. Fecal samples were collected from feral cats while their FIV statues were determined using a commercial SNAP kit. Total fecal DNA of each cat was tested for the presence of T. gondii DNA using a polymerase chain reaction (PCR) consistently detecting one genome equivalent. A FIV-positive status was detected in 18 of 105 (17.1%, 95% confidence interval (CI): 9.9%−24.3%) feral cats sampled. Furthermore, males were three times more likely to be FIV positive than females (p = 0.017) with an odds ratio of 3.93 (95% CI: 1.20–12.89). Adults were found to have at least twice the prevalence of FIV compared to cats younger than one year of age (p = 0.056) with an odds ratio of 3.07 (95% CI: 0.94–10.00). Toxoplasma gondii DNA was not detected in the feces of any of the 18 FIV-positive (95% CI: 0%−0.18%) and 87 FIV-negative cats (95% CI: 0%−0.04%). A follow-up study with a much bigger sample size is needed to prove or disprove the hypothesis that FIV-positive cats have a higher prevalence of shedding T. gondii oocysts than FIV-negative cats

Invariant expansion for the trigonal band structure of graphene

We present a symmetry analysis of the trigonal band structure in graphene, elucidating the transformational properties of the underlying basis functions and the crucial role of time-reversal invariance. Group theory is used to derive an invariant expansion of the Hamiltonian for electron states near the K points of the graphene Brillouin zone. Besides yielding the characteristic k-linear dispersion and higher-order corrections to it, this approach enables the systematic incorporation of all terms arising from external electric and magnetic fields, strain, and spin-orbit coupling up to any desired order. Several new contributions are found, in addition to reproducing results obtained previously within tight-binding calculations. Physical ramifications of these new terms are discussed.Comment: 10 pages, 1 figure; expanded version with more details and additional result

Terahertz and infrared spectroscopic evidence of phonon-paramagnon coupling in hexagonal piezomagnetic YMnO3

Terahertz and far-infrared electric and magnetic responses of hexagonal piezomagnetic YMnO3 single crystals are investigated. Antiferromagnetic resonance is observed in the spectra of magnetic permeability mu_a [H(omega) oriented within the hexagonal plane] below the Neel temperature T_N. This excitation softens from 41 to 32 cm-1 on heating and finally disappears above T_N. An additional weak and heavily-damped excitation is seen in the spectra of complex dielectric permittivity epsilon_c within the same frequency range. This excitation contributes to the dielectric spectra in both antiferromagnetic and paramagnetic phases. Its oscillator strength significantly increases on heating towards room temperature thus providing evidence of piezomagnetic or higher-order couplings to polar phonons. Other heavily-damped dielectric excitations are detected near 100 cm-1 in the paramagnetic phase in both epsilon_c and epsilon_a spectra and they exhibit similar temperature behavior. These excitations appearing in the frequency range of magnon branches well below polar phonons could remind electromagnons; however, their temperature dependence is quite different. We have used density functional theory for calculating phonon dispersion branches in the whole Brillouin zone. A detailed analysis of these results and of previously published magnon dispersion branches brought us to the conclusion that the observed absorption bands stem from phonon-phonon and phonon- paramagnon differential absorption processes. The latter is enabled by a strong short-range in-plane spin correlations in the paramagnetic phase.Comment: subm. to PR

Small Energy Scale for Mixed-Valent Uranium Materials

We investigate a two-channel Anderson impurity model with a $5f^1$ magnetic and a $5f^2$ quadrupolar ground doublet, and a $5f^2$ excited triplet. Using the numerical renormalization group method, we find a crossover to a non-Fermi liquid state below a temperature $T^*$ varying as the $5f^2$ triplet-doublet splitting to the 7/2 power. To within numerical accuracy, the non-linear magnetic susceptibility and the $5f^1$ contribution to the linear susceptibility are given by universal one-parameter scaling functions. These results may explain UBe$_{13}$ as mixed valent with a small crossover scale $T^*$.Comment: 4 pages, 3 figures, REVTeX, to appear in Phys. Rev. Let

Temperature-dependent Raman study of CeFeAsO0.9F0.1 Superconductor: Crystal field excitations, phonons and their coupling

We report temperature-dependent Raman spectra of CeFeAsO0.9F0.1 from 4 K to 300 K in spectral range of 60 to 1800 cm-1 and interpret them using estimates of phonon frequencies obtained from first-principles density functional calculations. We find evidence for a strong coupling between the phonons and crystal field excitations; in particular Ce3+ crystal field excitation at 432 cm-1 couples strongly with Eg oxygen vibration at 389 cm-1 . Below the superconducting transition temperature, the phonon mode near 280 cm-1 shows softening, signaling its coupling with the superconducting gap. The ratio of the superconducting gap to Tc thus estimated to be ~ 10 suggests CeFeAsO0.9F0.1 as a strong coupling superconductor. In addition, two high frequency modes observed at 1342 cm-1 and 1600 cm-

Generalized "Quasi-classical" Ground State for an Interacting Two Level System

We treat a system (a molecule or a solid) in which electrons are coupled linearly to any number and type of harmonic oscillators and which is further subject to external forces of arbitrary symmetry. With the treatment restricted to the lowest pair of electronic states, approximate "vibronic" (vibration-electronic) ground state wave functions are constructed having the form of simple, closed expressions. The basis of the method is to regard electronic density operators as classical variables. It extends an earlier "guessed solution", devised for the dynamical Jahn-Teller effect in cubic symmetry, to situations having lower (e.g., dihedral) symmetry or without any symmetry at all. While the proposed solution is expected to be quite close to the exact one, its formal simplicity allows straightforward calculations of several interesting quantities, like energies and vibronic reduction (or Ham) factors. We calculate for dihedral symmetry two different $q$-factors ("$q_z$" and "$q_x$") and a $p$-factor. In simplified situations we obtain $p=q_z +q_x -1$. The formalism enables quantitative estimates to be made for the dynamical narrowing of hyperfine lines in the observed ESR spectrum of the dihedral cyclobutane radical cation.Comment: 28 pages, 4 figure

Photonic Band Gaps of Three-Dimensional Face-Centered Cubic Lattices

We show that the photonic analogue of the Korringa-Kohn-Rostocker method is a viable alternative to the plane-wave method to analyze the spectrum of electromagnetic waves in a three-dimensional periodic dielectric lattice. Firstly, in the case of an fcc lattice of homogeneous dielectric spheres, we reproduce the main features of the spectrum obtained by the plane wave method, namely that for a sufficiently high dielectric contrast a full gap opens in the spectrum between the eights and ninth bands if the dielectric constant $\epsilon_s$ of spheres is lower than the dielectric constant $\epsilon_b$ of the background medium. If $\epsilon_s> \epsilon_b$, no gap is found in the spectrum. The maximal value of the relative band-gap width approaches 14% in the close-packed case and decreases monotonically as the filling fraction decreases. The lowest dielectric contrast $\epsilon_b/\epsilon_s$ for which a full gap opens in the spectrum is determined to be 8.13. Eventually, in the case of an fcc lattice of coated spheres, we demonstrate that a suitable coating can enhance gap widths by as much as 50%.Comment: 19 pages, 6 figs., plain latex - a section on coated spheres, two figures, and a few references adde

Electronic and phononic properties of cinnabar: ab initio calculations and some experimental results

We report ab initio calculations of the electronic band structure, the corresponding optical spectra, and the phonon dispersion relations of trigonal alpha-HgS (cinnabar). The calculated dielectric functions are compared with unpublished optical measurements by Zallen and coworkers. The phonon dispersion relations are used to calculate the temperature and isotopic mass dependence of the specific heat which has been compared with experimental data obtained on samples with the natural isotope abundances of the elements Hg and S (natural minerals and vapor phase grown samples) and on samples prepared from isotope enriched elements by vapor phase transport. Comparison of the calculated vibrational frequencies with Raman and ir data is also presented. Contrary to the case of cubic beta-HgS (metacinnabar), the spin-orbit splitting of the top valence bands at the Gamma-point of the Brillouin zone (Delta_0) is positive, because of a smaller admixture of 5d core electrons of Hg. Calculations of the lattice parameters, and the pressure dependence of Delta_0 and the corresponding direct gap E_0~2eV are also presented. The lowest absorption edge is confirmed to be indirect.Comment: 13 pages, 15 figure

Optimal numerical design of bucket elevators using discontinuous deformation analysis

Bucket elevators are efficient machines to transport granular materials in industrial and civil engineering applications. These materials are composed of hundreds, thousands or even more particles, the global behavior of which is defined by contact interactions. The first attempts to analyze the transportation of granular materials were treated by very simple continuum methods that do not take into account these interactions, producing simulations that do not fit the experimental results accurately. Given the internal discontinuity nature of granular media, it is reasonable to use numerical methods to model their behavior, such as discontinuous deformation analysis (DDA)-a member of the discrete element method family that started to be used in the 90s to analyze similar problems. The version of DDA used in the current work treats grains as rigid circular particles with friction, damping and eventually cohesion with the objective of simulating and analyzing in detail the discharge of granular materials with bucket elevators. A deterministic computer code has been implemented and validated against simplified analytical formulae and experimental results taken from the literature. This computer code is then used to obtain optimum two-dimensional bucket geometries under specific working conditions. The optimization aims to maximize transport distance and to minimize remaining material, taking into account bucket velocity and the properties of the grains. The resulting geometries are discussed and compared against standard designs.J.L. Perez-Aparicio, R. Bravo were partially supported by the MFOM I+D (2004/38), both by MICIIN #BIA 2008-00522 and the first also by Polytechnic University of Valencia under grant PAID 05-10-2674. J.J. Gomez-Hernandez was partially supported by MICIIN #CGL 2011-23295.Pérez Aparicio, JL.; Bravo, R.; Gómez-Hernández, JJ. (2014). Optimal numerical design of bucket elevators using discontinuous deformation analysis. Granular Matter. 16(4):485-498. https://doi.org/10.1007/s10035-014-0485-5S485498164Rademacher, F.: Non-spill discharge characteristics of bucket elevators. Powder Technol. 22(2), 215–241 (1979)Koster, K.: Bulk material discharge of bucket elevators, especially high-capacity bucket elevators. [zum schuettgutabwurf bei becherwerken, insbesondere bei hochleistungsbecherwerken]. Aufbereitungs-Technik 25(8), 450–463 (1984)Koster, K.: Use of high-capacity bucket elevators in the cement industry. [zum einsatz von hochleistungsbecherwerken in der zementindustrie]. Zement-Kalk-Gips 33(3), 116–119 (1980)Koster, K.: Development and state of the art in heavy-duty bucket elevators with central chains—part 2 [entwicklung und stand der technik von hochleistungs-becherwerken mit zentralkette—teil 2]. ZKG Int. 49(4), 173–187 (1996)Koster, K.: Centrifugal discharge of bucket elevators. Bulk Solids Handl. 5(2), 449–460 (1985)Koster, K.: Problem of complete emptying of high-speed elevator buckets. Aufbereitungs-Technik 27(9), 471–481 (1986)Korzen, Z.: Mechanics of gravitational discharge of cell-less bucket wheels in reclaiming machines. Bulk Solids Handl. 7(6), 801–812 (1987)Korzen, Z., Dudek, K.: Mathematical model of the operational efficiency of a multibucket centrifugal discharge wheel [model matematyczny wydajnosci roboczego procesu kola wieloczerpakowego z odsrodkowym wysypem]. Politechnika Warszawska Prace Naukowe Mechanika 1(121), 187–199 (1989)Shi, G., Goodman, R.: Two dimensional discontinuous deformation analysis. Int. J. Numer. Anal. Methods Geomech. 9(6), 541–556 (1985)Pérez-Aparicio, J., Bravo, R.: Discrete Elements, vol. 2, pp. 41–77. Consorcio TCN (2006)Shi, G.: Discontinuous Deformation Analysis: A New Model for the Statics and Dynamics of Block Systems. Ph.D. thesis, University of California, Berkeley (1988)Moosavi, M., Grayeli, R.: A model for cable bolt-rock mass interaction: integration with discontinuous deformation analysis (DDA) algorithm. Int. J. Rock Mech. Min. Sci. 43(4), 661–670 (2006)Pérez-Aparicio, J., Bravo, R., Ortiz, P.: Refined element discontinuous numerical analysis of dry-contact masonry arches. Eng. Struct. 48, 578–587 (2013)McBride, W., Sinnott, M., Cleary, P.: Discrete element modelling of a bucket elevator head pulley transition zone. Granul. Matter 13(2), 169–174 (2011)Kruggel-Emden, H., Sudbrock, F., Wirtz, S., Scherer, V.: Experimental and numerical investigation of the bulk behavior of wood pellets on a model type grate. Granul. Matter 14(6), 681–693 (2012)Walton, O., Moor, C., Gill, K.: Effects of gravity on cohesive behavior of fine powders: implications for processing lunar regolith. Granul. Matter 9(5), 353–363 (2007)Gao, Y., Muzzio, F., Ierapetritou, M.: Optimizing continuous powder mixing processes using periodic section modeling. Chem. Eng. Sci. 80, 70–80 (2012)Shmulevich, I.: State of the art modeling of soil-tillage interaction using discrete element method. Soil Tillage Res. 111(1), 41–53 (2010)Moon, T., Oh, J.: A study of optimal rock-cutting conditions for hard rock tbm using the discrete element method. Rock Mech. Rock Eng. 45(5), 837–849 (2012)Makokha, A., Moys, M., Bwalya, M., Kimera, K.: A new approach to optimising the life and performance of worn liners in ball mills: experimental study and DEM simulation. Int. J. Miner. Process. 84(1–4), 221–227 (2007)Balevičius, R., Kačianauskas, R., Mroz, Z., Sielamowicz, I.: Discrete element method applied to multiobjective optimization of discharge flow parameters in hoppers. Struct. Multidiscip. Optim. 31(3), 163–175 (2006)Hu, L.: Gradual deformation and iterative calibration of Gaussian-related stochastic models. Math. Geol. 32(1), 87–108 (2000)Bravo, R., Pérez-Aparicio, J., Laursen, T.: An energy consistent frictional dissipating algorithm for particle contact problems. Int. J. Numer. Methods Eng. 92(9), 753–781 (2012)Belytschko, T., Liu, W., Moran, B.: Nonlinear Finite Elements for Continua and Structures. Wiley, New York (2000)Beckert, R., Föll, R.: Untersuchung der abwurfverhältnisse an kettenbecherwerken. Förden Heben 1(15), 833–836 (1966)Jaskulski, A.: Engineer-to-order approach to high speed bucket elevator design in a small-enterprise. Appl. Eng. Agric. 24(5), 545–557 (2008)Beverley, G.: Mechanics of High Speed Bucket Elevator Discharge. Ph.D. thesis. University of Newcastle (1986)Beverley, G., Roberts, A., Hayes, J.: Mechanics of high speed elevator discharge. Bulk Solids Handl. 3(4), 853–859 (1983)Korzen, Z., Dudek, K.: Reclaiming with a high-speed bucket wheel with centrifugal discharge. Bulk Solids Handl. 11(3), 615–626 (1991)Bravo, R., Pérez-Aparicio, J., Laursen, T.: An enhanced energy conserving time stepping algorithm for frictionless particle contacts. Int. J. Numer. Methods Eng. 85(11), 1415–1435 (2011)Jaskulski, A.: Methodology of Multi-Criteria Optimization of Appliances for Vertical Grain Transportation. Ph.D. thesis. Warsaw University of Technology (1992

The contribution of hormone sensitive lipase to adipose tissue lipolysis and its regulation by insulin in periparturient dairy cows

Hormone sensitive lipase (HSL) activation is part of the metabolic adaptations to the negative energy balance common to the mammalian periparturient period. This study determined HSL contribution to adipose tissue (AT) lipolysis and how insulin regulates its activity in periparturient dairy cows. Subcutaneous AT (SCAT) samples were collected at 11 d prepartum (dry) and 11 (fresh) and 24 d (lactation) postpartum. Basal and stimulated lipolysis (ISO) responses were determined using explant cultures. HSL contribution to lipolysis was assessed using an HSL inhibitor (CAY). Basal lipolysis was higher in SCAT at dry compared with fresh. CAY inhibited basal lipolysis negligibly at dry, but at fresh and lactation it reduced basal lipolysis by 36.1 +/- 4.51% and 43.1 +/- 4.83%, respectively. Insulin inhibited lipolysis more pronouncedly in dry compared to fresh. Results demonstrate that HSL contribution to basal lipolysis is negligible prepartum. However, HSL is a major driver of SCAT lipolytic responses postpartum. Lower basal lipolysis postpartum suggests that reduced lipogenesis is an important contributor to fatty acid release from SCAT. Loss of adipocyte sensitivity to the antilipolytic action of insulin develops in the early lactation period and supports a state of insulin resistance in AT of cows during the first month postpartum