(Invited) towards a vertical and damage free post-etch InGaAs fin profile: dry etch processing, sidewall damage assessment and mitigation options

Based on current projections, III-Vs are expected to replace Si as the n-channel solution in FinFETs at the 7nm technology node. The realisation of III-V FinFETs entails top-down fabrication via dry etch techniques. Vertical fins in conjunction with high quality sidewall MOS interfaces are required for high-performance logic devices. This, however, is difficult to achieve with dry etching. Highly anisotropic etching required of vertical fins is concomitant with increased damage to the sidewalls, resulting in the quality of the sidewall MOS interface being compromised. In this work, we address this challenge in two stages by first undertaking a systematic investigation of dry etch processing for fin formation, with the aim of obtaining high resolution fins with vertical sidewalls and clean etch surfaces. In the second stage, dry etch process optimisation and post-etch sidewall passivation schemes are explored to mitigate the damage arising from anisotropic etching required for the realisation of vertical fins

Elastic constants of borocarbides. New approach to acoustic Measurement technique

A new version of the phase method of determining the sound velocity is proposed and implemented. It utilizes the ``Nonius'' measurement technique and can give acceptable accuracy (~1%) in samples of submillimeter size. Measurements of the sound velocity are made in single-crystal samples of the borocarbides RNi2B2C (R = Y,Lu,Ho). The elastic constants and the Debye temperature are calculated.Comment: 5 figures, 2 table

Vertical thermal structure of the Venus atmosphere from temperature and pressure measurements

Accurate temperature and pressure measurements were made on the Vega-2 lander during its entire descent. The temperature and pressure at the surface were 733 K and 89.3 bar, respectively. A strong temperature inversion was found in the upper troposphere. Several layers with differing static stability were visible in the atmospheric structure

Rapid and inexpensive purification of adenovirus vectors using an optimised aqueous two-phase technology.

Adenoviruses (AdVs) are used as gene therapy vectors to treat human diseases and as vaccines against COVID-19. AdVs are produced by transfecting human embryonic kidney 239 (HEK293) or PER.C6 virus producer cells with AdV plasmid vectors or infecting these cells withcell lysates containing replication-defective AdV. Cell lysates can be purified further by caesium chloride or chromatographic protocols to research virus seed stocks (RVSS) for characterisation to high quality master virus seed stocks (MVSS) and working virus seed stocks (WVSS) before downstream production of pure, high titre AdV. Lysates are poorly infectious, block filtration columns and have limited storage capability. Aqueous two-phase systems (ATPS) are an alternative method for AdV purification that rapidly generates cleaner RVSS for characterisation to MVSS. After testing multiple ATPS formulations, an aqueous mixture of 20 % PEG 600 and 20 % (NH4)2SO4 (w/w) was found most effective for AdV partitioning, producing up to 97+3% yield of high-titre virus that was devoid of aggregates both effective in vitro and in vivo with no observable cytotoxicity. Importantly, AdV preparations stored at −20 °C or 4 °C show negligible loss of titre and are suitable for downstream processing to clinical grade to support the need for AdV vaccines

An overview of the two-phase solvent systems used in the countercurrent separation of phenylethanoid glycosides and iridoids and their biological relevance

Phenylethanoid glycosides (PhGs) and iridoids are two vast groups of water soluble secondary metabolites widely distributed in plant kingdom and well known for their important biological activities. Their purification by conventional chromatography is time consuming, uses large amounts of organic solvents and requires repeated steps. Moreover, the sample recovery is low, because the hydroxyl groups of PhGs and iridoids make them strongly adsorbed onto the solid support (silica gel, Sephadex LH-20) during separation. Being a liquid–liquid based technology, countercurrent separation (CCS) comes as an alternative tool to overcome the issues associated with solid-phase adsorbents. It has been successfully used for the separation of many groups of specialized plant metabolites. This is the first extensive review describing the application of CCS for purification of iridoids and PhGs, based on the research papers from the last 20 years (1998–2018) that used countercurrent chromatography and centrifugal partition chromatography technologies. In total, 65 papers described the isolation of 84 different phytochemicals (28 PhGs and 56 iridoids) from 42 plant species belonging to 16 distinct families that were separated with 59 different biphasic solvent systems. Since PhGs and iridoids are highly polar molecules, more than half of the employed systems (56%) were composed of various ratios of ethyl acetate–alcohol–water, as well as binary systems, such as ethyl acetate–water and n-butanol– water. The current review may be used as starting point for CCS users on their sinuous road of isolating known or waiting to be discovered PhGs and iridoids

Role of Plant Carbonic Anhydrases under Stress Conditions

Carbonic anhydrases (CAs) are enzymes catalyzing the reversible hydration of carbon dioxide with the generation of protons and bicarbonate. The components of the reaction are involved in almost all metabolic processes in higher plants and algae, maintaining the balance of electrolytes and pH, gluconeogenesis, lipogenesis, ethylene synthesis, and others. The CAs may take part in transmitting signals to activate cascades of protective response genes. Our findings reveal significant changes in the content of carbonic anhydrase gene transcripts in response to changes in environmental conditions. Here we discuss the functions of CAs located in the plasma membrane, chloroplast envelope, chloroplast stroma, and in thylakoids in plant protection under stress conditions, such as high illumination, low and high concentration of carbon dioxide in the environment, drought, and salinity

ATF4 couples MYC-dependent translational activity to bioenergetic demands during tumour progression.

The c-Myc oncogene drives malignant progression and induces robust anabolic and proliferative programmes leading to intrinsic stress. The mechanisms enabling adaptation to MYC-induced stress are not fully understood. Here we reveal an essential role for activating transcription factor 4 (ATF4) in survival following MYC activation. MYC upregulates ATF4 by activating general control nonderepressible 2 (GCN2) kinase through uncharged transfer RNAs. Subsequently, ATF4 co-occupies promoter regions of over 30 MYC-target genes, primarily those regulating amino acid and protein synthesis, including eukaryotic translation initiation factor 4E-binding protein 1 (4E-BP1), a negative regulator of translation. 4E-BP1 relieves MYC-induced proteotoxic stress and is essential to balance protein synthesis. 4E-BP1 activity is negatively regulated by mammalian target of rapamycin complex 1 (mTORC1)-dependent phosphorylation and inhibition of mTORC1 signalling rescues ATF4-deficient cells from MYC-induced endoplasmic reticulum stress. Acute deletion of ATF4 significantly delays MYC-driven tumour progression and increases survival in mouse models. Our results establish ATF4 as a cellular rheostat of MYC activity, which ensures that enhanced translation rates are compatible with survival and tumour progression

On the analyticity and Gevrey class regularity up to the boundary for the Euler Equations

We consider the Euler equations in a three-dimensional Gevrey-class bounded domain. Using Lagrangian coordinates we obtain the Gevrey-class persistence of the solution, up to the boundary, with an explicit estimate on the rate of decay of the Gevrey-class regularity radius

Influence of Culture Conditions on the Growth and Fatty Acid Composition of Green Microalgae Oocystis rhomboideus, Scenedesmus obliquus, Dictyochlorella globosa

Microalgae due to the ability to accumulate high levels of practically valuable polyunsaturated fatty acids attract attention as a promising raw material for commercial products. It were defined the features of the growth processes of cells green protococcal microalgae Oocystis rhomboideus, Scenedesmus obliquus, Dictyochlorella globosa at cultivation in different nutritional mediums. For the rapid accumulation of biomass, combined with high productivity of total lipids fraction yield recommended to use the Fitzgerald medium (Scenodesmus obliquus, Oocystis rhomboideus) and/or Bold medium (Dictyochlorella globosa). Productivity of lipids decreased in sequence Dictyochlorella globosa > Scenodesmus obliquus > Oocystis rhomboideus. The bulk of fatty acids fraction of the total lipids is unsaturated fatty acids, which accounts for 70 to 83% of the total number of fatty acids. The share of monoenic acids varies from 16 to 36 %, the share of unsaturated fatty acids - from 44 to 65% of total fatty acids fraction. Among the unsaturated acids dominate α-linolenic acid (C18:3n-3), hexadecatetraenic acid (C16:4) and linoleic acid (C18:2)