Fast C-V method to mitigate effects of deep levels in CIGS doping profiles

In this work, methods to determine more accurate doping profiles in semiconductors is explored where trap-induced artifacts such as hysteresis and doping artifacts are observed. Specifically in CIGS, it is shown that this fast capacitance-voltage (C-V) approach presented here allows for accurate doping profile measurement even at room temperature, which is typically not possible due to the large ratio of trap concentration to doping. Using deep level transient spectroscopy (DLTS) measurement, the deep trap responsible for the abnormal C-V measurement above 200 K is identified. Importantly, this fast C-V can be used for fast evaluation on the production line to monitor the true doping concentration, and even estimate the trap concentration. Additionally, the influence of high conductance on the apparent doping profile at different temperature is investigated

Failure assessment of lightly reinforced floor slabs. I: Experimental investigation

This paper is concerned with the ultimate behavior of lightly reinforced concrete floor slabs under extreme loading conditions. Particular emphasis is given to examining the failure conditions of idealized composite slabs which become lightly reinforced in a fire situation as a result of the early loss of the steel deck. An experimental study is described which focuses on the response of two-way spanning floor slabs with various materials and geometric configurations. The tests enable direct assessment of the influence of a number of key parameters such as the reinforcement type, properties, and ratio on the ultimate response. The results also permit the development of simplified expressions that capture the influence of salient factors such as bond characteristics and reinforcement properties for predicting the ductility of lightly reinforced floor slabs. The companion paper complements the experimental observations with detailed numerical assessments of the ultimate response and proposes analytical models that predict failure of slab members by either reinforcement fracture or compressive crushing of concrete. © 2011 American Society of Civil Engineers

Conditional Hardness of Earth Mover Distance

The Earth Mover Distance (EMD) between two sets of points A, B subseteq R^d with |A| = |B| is the minimum total Euclidean distance of any perfect matching between A and B. One of its generalizations is asymmetric EMD, which is the minimum total Euclidean distance of any matching of size |A| between sets of points A,B subseteq R^d with |A| <= |B|. The problems of computing EMD and asymmetric EMD are well-studied and have many applications in computer science, some of which also ask for the EMD-optimal matching itself. Unfortunately, all known algorithms require at least quadratic time to compute EMD exactly. Approximation algorithms with nearly linear time complexity in n are known (even for finding approximately optimal matchings), but suffer from exponential dependence on the dimension. In this paper we show that significant improvements in exact and approximate algorithms for EMD would contradict conjectures in fine-grained complexity. In particular, we prove the following results: - Under the Orthogonal Vectors Conjecture, there is some c>0 such that EMD in Omega(c^{log^* n}) dimensions cannot be computed in truly subquadratic time. - Under the Hitting Set Conjecture, for every delta>0, no truly subquadratic time algorithm can find a (1 + 1/n^delta)-approximate EMD matching in omega(log n) dimensions. - Under the Hitting Set Conjecture, for every eta = 1/omega(log n), no truly subquadratic time algorithm can find a (1 + eta)-approximate asymmetric EMD matching in omega(log n) dimensions

Effects of tillage methods and crop rotations on the incidence and severity of soil-borne and foliar diseases of wheat, flax, and peas

Non-Peer Reviewe

A Mesolithic settlement site at Howick, Northumberland: a preliminary report

Excavations at a coastal site at Howick during 2000 and 2002 have revealed evidence for a substantial Mesolithic settlement and a Bronze Age cist cemetery. Twenty one radiocarbon determinations of the earlier eighth millennium BP (Cal.) indicate that the Mesolithic site is one of the earliest known in northern Britain. An 8m core of sediment was recovered from stream deposits adjacent to the archaeological site which provides information on local environmental conditions. Howick offers a unique opportunity to understand aspects of hunter-gatherer colonisation and settlement during a period of rapid palaeogeographical change around the margins of the North Sea basin, at a time when it was being progressively inundated by the final stages of the postglacial marine transgression. The cist cemetery will add to the picture of Bronze Age occupation of the coastal strip and again reveals a correlation between the location of Bronze Age and Mesolithic sites which has been observed elsewhere in the region

qq-Trinomial identities

We obtain connection coefficients between $q$-binomial and $q$-trinomial coefficients. Using these, one can transform $q$-binomial identities into a $q$-trinomial identities and back again. To demonstrate the usefulness of this procedure we rederive some known trinomial identities related to partition theory and prove many of the conjectures of Berkovich, McCoy and Pearce, which have recently arisen in their study of the $\phi_{2,1}$ and $\phi_{1,5}$ perturbations of minimal conformal field theory.Comment: 21 pages, AMSLate

Demonstration Advanced Avionics System (DAAS) function description

The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft

Principal Component Analysis with Noisy and/or Missing Data

We present a method for performing Principal Component Analysis (PCA) on noisy datasets with missing values. Estimates of the measurement error are used to weight the input data such that compared to classic PCA, the resulting eigenvectors are more sensitive to the true underlying signal variations rather than being pulled by heteroskedastic measurement noise. Missing data is simply the limiting case of weight=0. The underlying algorithm is a noise weighted Expectation Maximization (EM) PCA, which has additional benefits of implementation speed and flexibility for smoothing eigenvectors to reduce the noise contribution. We present applications of this method on simulated data and QSO spectra from the Sloan Digital Sky Survey.Comment: Accepted for publication in PASP; v2 with minor updates, mostly to bibliograph

Prevalence of sulfonamide resistance genes in bacterial isolates from manured agricultural soils and pig slurry in the United Kingdom

Prevalence of three sulfonamide resistance genes, sul1, sul2 and sul3 and sulfachloropyridazine (SCP) resistance was determined in bacteria isolated from UK manured agricultural clay soils and slurry samples, over a two year period. Slurry from tylosin-fed pigs amended with SCP and oxytetracycline (OTC) was used for manuring. Sul gene positive isolates were further screened for the presence of class 1 and 2 integrons. Phenotypic resistance to SCP was significantly higher in pig slurry and post application soil than in pre-application soil. Of 5isolates, 23 % carried sul1, 18 % sul2 and 9 % sul3 only. Two percent of isolates contained all three sul genes. Class 1 and class 2 integrons were identified in 5 % and 11.7 % of sul positive isolates. In previous reports, sul1 was linked to class 1 integrons, but in this study only 8 % of sul1 positive isolates carried the intI1 gene. Sulfonamide resistant pathogens were identified in slurry amended soil and soil leachate, including Shigella flexneri, Aerococcus spp. and Acinetobacter baumanni, suggesting a potential environmental reservoir. Sulfonamide resistance in Psychrobacter, Enterococcus and Bacillus spp. is reported for the first time, and this study also provides the first description of the genotype sul1, sul2 and sul3 outside the Enterobacteriacae, and in the soil environment