5,525 research outputs found
Recommended from our members
A micro-electro-mechanical-system-based thermal shear-stress sensor with self-frequency compensation
By applying the micro-electro-mechanical-system (MEMS) fabrication technology, we developed a micro-thermal sensor to measure surface shear stress. The heat transfer from a polysilicon heater depends on the normal velocity gradient and thus provides the surface shear stress. However, the sensitivity of the shear-stress measurements in air is less than desirable due to the low heat capacity of air. A unique feature of this micro-sensor is that the heating element, a film 1 Β΅m thick, is separated from the substrate by a vacuum cavity 2 Β΅m thick. The vacuum cavity prevents the conduction of heat to the substrate and therefore improves the sensitivity by an order of magnitude. Owing to the low thermal inertia of the miniature sensing element, this shear-stress micro-sensor can provide instantaneous measurements of small-scale turbulence. Furthermore, MEMS technology allows us make multiple sensors on a single chip so that we can perform distributed measurements. In this study, we use multiple polysilicon sensor elements to improve the dynamic performance of the sensor itself. It is demonstrated that the frequency-response range of a constant-current sensor can be extended from the order of 100 Hz to 100 kHz
Macro aerodynamic devices controlled by micro systems
Micro-ElectroMechanical-Systems (MEMS) have emerged as a major enabling technology across the engineering disciplines. In this study, the possibility of applying MEMS to the aerodynamic field was explored. We have demonstrated that microtransducers can be used to control the motion of a delta wing in a wind tunnel and can even maneuver a scaled aircraft in flight tests. The main advantage of using micro actuators to replace the traditional control surface is the significant reduction of radar cross-sections. At a high angle of attack, a large portion of the suction loading on a delta wing is contributed by the leading edge separation vortices which originate from thin boundary layers at the leading edge. We used microactuators with a thickness comparable to that of the boundary layer in order to alter the separation process and thus achieved control of the global motion by minute perturbations
Modeling Shallow Over-Saturated Mixtures on Arbitrary Rigid Topography
In this paper a system of depth-integrated equations for over-saturated debris flows on three-dimensional topography is derived. The lower layer is a saturated mixture of density preserving solid and fluid constituents, where the pore fluid is in excess, so that an upper fluid layer develops above the mixture layer. At the layer interface fluid mass exchange may exist and for this a parameterization is needed. The emphasis is on the description of the influence on the flow by the curvature of the basal surface, and not on proposing rheological models of the avalanching mass. To this end, a coordinate system fitted to the topography has been used to properly account for the geometry of the basal surface. Thus, the modeling equations have been written in terms of these coordinates, and then simplified by using (1) the depth-averaging technique and (2) ordering approximations in terms of an aspect ratio Ο΅ which accounts for the scale of the flowing mass. The ensuing equations have been complemented by closure relations, but any other such relations can be postulated. For a shallow two-layer debris with clean water in the upper layer, flowing on a slightly curved surface, the equilibrium free surface is shown to be horizonta
A hierarchy of avalanche models on arbitrary topography
We use the non-Cartesian, topography-based equations of mass and momentum balance for gravity driven frictional flows of Luca etal. (Math. Mod. Meth. Appl. Sci. 19, 127-171 (2009)) to motivate a study on various approximations of avalanche models for single-phase granular materials. By introducing scaling approximations we develop a hierarchy of model equations which differ by degrees in shallowness, basal curvature, peculiarity of constitutive formulation (non-Newtonian viscous fluids, Savage-Hutter model) and velocity profile parametrization. An interesting result is that differences due to the constitutive behaviour are largely eliminated by scaling approximations. Emphasis is on avalanche flows; however, most equations presented here can be used in the dynamics of other thin films on arbitrary surface
Parylene Accelerometer Utilizing Spiral Beams
This paper reports a Parylene accelerometer utilizing spiral beams. Since Parylene has intrinsic tensile stress, the resonant frequency Ο_n of sensor structure is higher than that under no tensile stress. Considering the sensitivity of accelerometer is 1/Ο_n^2 , the investigation of Ο_n of a suspended structure supported by straight beams is carried out both theoretically and experimentally. As a result, it is proved that comparatively long beams are necessary for realizing the high sensitivity of a Parylene sensor with tensile stress. A spiral beam is effective for not only realizing a long beam in a limited space, but also realizing stress relaxation. Both Parylene accelerometer with straight beams and that with spiral beams are fabricated. Sensitivity of them is characterized, and the effectiveness of utilizing spiral beam is confirmed
Non-magnetic impurities in two- and three- dimensional Heisenberg antiferromagnets
In this paper we study in a large-S expansion effects of substituting spins
by non-magnetic impurities in two- and three- dimensional Heisenberg
antiferromagnets in a weak magnetic field. In particular, we demonstrate a
novel mechanism where magnetic moments are induced around non-magnetic
impurities when magnetic field is present. As a result, Curie-type behaviour in
magnetic susceptibility can be observed well below the Neel temperature, in
agreement with what is being observed in and
compounds.Comment: Latex fil
New Gauged Linear Sigma Models for 8D HyperKahler Manifolds and Calabi-Yau Crystals
We propose two kinds of gauged linear sigma models whose moduli spaces are
real eight-dimensional hyperKahler and Calabi-Yau manifolds, respectively.
Here, hyperKahler manifolds have sp(2) holonomy in general and are dual to Type
IIB (p,q)5-brane configurations. On the other hand, Calabi-Yau fourfolds are
toric varieties expressed as quotient spaces. Our model involving fourfolds is
different from the usual one which is directly related to a symplectic quotient
procedure. Remarkable features in newly-found three-dimensional
Chern-Simons-matter theories appear here as well, such as dynamical
Fayet-Iliopoulos parameters, one dualized photon and its residual discrete
gauge symmetry.Comment: 20 pages, 1 figure; v2: minor changes and references added; v3:
statements improved, newer than JHEP versio
- β¦