The potential of developing high hepatic clearance drugs via controlled release: Lessons from Kirchhoff's Laws

When a new molecular entity is predicted to exhibit high clearance in humans, pharmaceutical sponsors almost universally search for similar acting back-up compounds that will demonstrate low clearance. Here we show that, except for oral dosing, there can be marked advantages to developing and commercializing controlled release formulations of high clearance drugs, the expertise of readers of this journal. Our recent publications demonstrate that the universally held pharmacokinetic principle that drug delivery rate has no effect on measured drug clearance is not correct. Rather, we show that if clearance from the drug delivery site is markedly less than the iv bolus clearance of a drug, the in vivo drug clearance can be the drug delivery clearance controlled by the designed dosage form. This approach will be especially advantageous for high hepatic clearance drugs. These advantages include not being concerned with: a) saturable nonlinear kinetics, b) significant pharmacogenomic differences, c) drug-drug induction mechanisms, and d) in many cases drug-drug inhibition interactions. This is due to the ability of a drug sponsor to design clearance, independent of the pharmacokinetic characteristics for high clearance compounds, where clearance from the dosage form becomes the drug clearance from the patient. Recognition of this principle, as described here, results from our development of the use of Kirchhoff's Laws from physics to derive rate-defining clearance and rate constant elimination processes independent of differential equation derivations. The key message for readers of this journal is that high clearance drugs are potentially drugable through formulation design and should not be outright disregarded, since for such drugs the dose-corrected area under the curve can be increased if the release rate from the injection site is controlled and slow resulting in drug clearance from the body controlled by clearance from the dosage form. The concepts presented here describe previously unrecognized advantages of controlled release formulations

Potential Anti-Tuberculosis Activity of the Extracts and Their Active Components of Anogeissus leiocarpa (DC.) Guill. and Perr. with Special Emphasis on Polyphenols

In Sudanese traditional medicine, decoctions of the stem bark of Anogeissus leiocarpa are used for the treatment of tuberculosis (TB). However, this plant has not been investigated before for its antimycobacterial effects. Our screening results show, for the first time, that many extracts of various parts of A. leiocarpa exhibit growth inhibitory activity against Mycobacterium smegmatis. Minimum inhibitory concentration (MIC) values ranged between 625 and 5000 µg/mL, with an ethyl acetate extract of the root showing the lowest MIC value. The good antimycobacterial effects of the root part could be due to its high concentration of ellagic acid derivatives, ellagitannins, and flavonoids. Thin layer chromatography (TLC) fractionation resulted in some fractions with better activity than the starting point crude methanol extract (MIC 2500 µg/mL). Those fractions with the lowest MIC values contained a high number of antioxidant compounds. Fractions 3 and 4 (MIC 1500 and 1000 µg/mL, respectively) contained high concentrations of di-methyl ellagic acid ([M-H]− 329.0318). Fraction 6 (MIC 2000 µg/mL) contained a lower concentration of di-methyl ellagic acid and was not as growth inhibitory as fractions 3 and 4. Moreover, in fraction 3, an acetylated ellagic acid derivative ([M-H]− 343.0477) and di-methyl-ellagic acid xyloside ([M-H]− 461.0739) were tentatively characterized. Di-methyl ellagic acid xyloside was also present in fraction 4 and could strongly contribute to the antimycobacterial effect of this fraction. Additionally, protocatechuic acid ([M-H]− at m/z 153.0196) was present in fraction 4. Our antimycobacterial results obtained from this research justify the use of A. leiocarpa in Sudanese folk medicine against cough related to TB. Roots, stem bark, and leaves of A. leiocarpa are sources for new potent anti-TB drug lead compounds

Potential Anti-Tuberculosis Activity of the Extracts and Their Active Components of Anogeissus leiocarpa (DC.) Guill. and Perr. with Special Emphasis on Polyphenols

In Sudanese traditional medicine, decoctions of the stem bark of Anogeissus leiocarpa are used for the treatment of tuberculosis (TB). However, this plant has not been investigated before for its antimycobacterial effects. Our screening results show, for the first time, that many extracts of various parts of A. leiocarpa exhibit growth inhibitory activity against Mycobacterium smegmatis. Minimum inhibitory concentration (MIC) values ranged between 625 and 5000 µg/mL, with an ethyl acetate extract of the root showing the lowest MIC value. The good antimycobacterial effects of the root part could be due to its high concentration of ellagic acid derivatives, ellagitannins, and flavonoids. Thin layer chromatography (TLC) fractionation resulted in some fractions with better activity than the starting point crude methanol extract (MIC 2500 µg/mL). Those fractions with the lowest MIC values contained a high number of antioxidant compounds. Fractions 3 and 4 (MIC 1500 and 1000 µg/mL, respectively) contained high concentrations of di-methyl ellagic acid ([M-H]− 329.0318). Fraction 6 (MIC 2000 µg/mL) contained a lower concentration of di-methyl ellagic acid and was not as growth inhibitory as fractions 3 and 4. Moreover, in fraction 3, an acetylated ellagic acid derivative ([M-H]− 343.0477) and di-methyl-ellagic acid xyloside ([M-H]− 461.0739) were tentatively characterized. Di-methyl ellagic acid xyloside was also present in fraction 4 and could strongly contribute to the antimycobacterial effect of this fraction. Additionally, protocatechuic acid ([M-H]− at m/z 153.0196) was present in fraction 4. Our antimycobacterial results obtained from this research justify the use of A. leiocarpa in Sudanese folk medicine against cough related to TB. Roots, stem bark, and leaves of A. leiocarpa are sources for new potent anti-TB drug lead compounds

Assessing the response of plant flavonoids to UV radiation : an overview of appropriate techniques

Flavonoids are a large group of plant secondary metabolites that are present in most plants, and are vital for plant growth, development and protection. Among the many functions of these compounds is their contribution to stress amelioration. The accurate identification and quantification of total or individual flavonoids in plants exposed to stressful conditions (e.g. ultraviolet radiation) is challenging due to their structural diversity. The present review provides the up to date knowledge and highlights trends in plant flavonoid analysis. The review covers all steps from the field to the laboratory, focussing on UV-B effects on flavonoids, and identifying critical issues concerning sample collection, pre-treatment, extraction techniques and quantitative or qualitative analysis. A well-planned sampling and sample prehandling strategy is vital when capturing organ, tissue and developmental-stage dependent changes in flavonoids, as well as the dynamic changes due to time of UV-exposure and diurnal or seasonal parameters. A range of advanced extraction and purification techniques can facilitate the quantitative transfer of flavonoids to solvents. The advantages and disadvantages of analytical methods, including chromogenic assays, liquid and thin-layer chromatography, mass spectrometry, nuclear magnetic resonance detection, and non-destructive in situ fluorescent analysis need to be consciously evaluated in the context of the specific biological question posed. Thus, no one method can be applied to every single study of flavonoid. The message of this review is that researchers will need to carefully consider the biological process that they intend to study, and select an analytical method that optimally matches their specific objectives.Peer reviewe

Evaluation of Residual Stress in 300m Steels Using Magnetization, Barkhausen Effect and X-Ray Diffraction Techniques

This investigation was undertaken to compare the techniques of x-ray diffraction, Barkhausen effect and magnetization measurement as methods of nondestructive evaluation of stress in shot peened 300M steel. In particular we were concerned with the estimation of the level of prevailing applied stress and the compressive overload (plastic deformation) which the samples had been subjected to. The 300M steel used in this study is a constructional material for the landing gears of aircraft, and as these components will eventually experience fatigue failure if not replaced, it was of interest to develop NDE techniques for the assessment of the mechanical condition of landing gears of in-service aircraft

Dual RNA-seq analysis provides new insights into interactions between Norway spruce and necrotrophic pathogen Heterobasidion annosum s.l.

BackgroundRoot and butt rot of conifer trees caused by fungi belonging to the Heterobasidion annosum species complex is one of the most economically important fungal diseases in commercial conifer plantations throughout the Northern hemisphere. We investigated the interactions between Heterobasidion fungi and their host by conducting dual RNA-seq and chemical analysis on Norway spruce trees naturally infected by Heterobasidion spp. We analyzed host and pathogen transcriptome and phenolic and terpenoid contents of the spruce trees.ResultsPresented results emphasize the role of the phenylpropanoid and flavonoid pathways in the chemical defense of Norway spruce trees. Accumulation of lignans was observed in trees displaying symptoms of wood decay. A number of candidate genes with a predicted role in the higher level regulation of spruce defense responses were identified. Our data indicate a possible role of abscisic acid (ABA) signaling in the spruce defense against Heterobasidion infection. Fungal transcripts corresponding to genes encoding carbohydrate- and lignin-degrading enzymes, secondary metabolism genes and effector-like genes were expressed during the host colonization.ConclusionsOur results provide additional insight into defense strategies employed by Norway spruce trees against Heterobasidion infection. The potential applications of the identified candidate genes as markers for higher resistance against root and butt rot deserve further evaluation.Peer reviewe

Climate Change Effects on Secondary Compounds of Forest Trees in the Northern Hemisphere

Plant secondary compounds (PSCs), also called secondary metabolites, have high chemical and structural diversity and appear as non-volatile or volatile compounds. These compounds may have evolved to have specific physiological and ecological functions in the adaptation of plants to their growth environment. PSCs are produced by several metabolic pathways and many PSCs are specific for a few plant genera or families. In forest ecosystems, full-grown trees constitute the majority of plant biomass and are thus capable of producing significant amounts of PSCs. We summarize older literature and review recent progress in understanding the effects of abiotic and biotic factors on PSC production of forest trees and PSC behavior in forest ecosystems. The roles of different PSCs under stress and their important role in protecting plants against abiotic and biotic factors are also discussed. There was strong evidence that major climate change factors, CO2 and warming, have contradictory effects on the main PSC groups. CO2 increases phenolic compounds in foliage, but limits terpenoids in foliage and emissions. Warming decreases phenolic compounds in foliage but increases terpenoids in foliage and emissions. Other abiotic stresses have more variable effects. PSCs may help trees to adapt to a changing climate and to pressure from current and invasive pests and pathogens. Indirect adaptation comes via the effects of PSCs on soil chemistry and nutrient cycling, the formation of cloud condensation nuclei from tree volatiles and by CO2 sequestration into PSCs in the wood of living and dead forest trees

Comprehensive analysis of Barkhausen emission spectra using pulse height analysis, frequency spectrum, and pulse wave form analysis

The dependence of magnetic Barkhausen emissions (MBE) upon both field excitation and detection frequencies and excitation wave form was studied in order to investigate two of several crucial factors which affect the emissions. Sinusoidal, triangular, and square wave forms were used to generate the MBE and the pulse height spectra, frequency spectra, and pulse wave forms of these signals were analyzed. The frequency spectra of sinusoidal and triangular alternating field excitations showed similar behavior but the spectrum under square wave excitation was different due to the existence of high frequency components during square wave switching. As yet, no common standard has been agreed upon for parameterization and representation of Barkhausen signals. It appears from this work that field excitation wave form and frequency should define the inputs, while detection frequency range, pulse height spectrum, frequency spectrum, and emitted pulse wave form analysis should be used to quantify the output

Biaxial Stress Effects on Barkhausen Signals in a Steel Pipe for the Case of Magnetic Field Noncoaxial with Stress Axes

Many mechanical stress situations in which NDE might be performed are biaxial in character. Examples are gas and oil pipelines, power plant steam pipes, railroad wheels, and turbine blades.</p