642 research outputs found
On the thermodynamics of first-order phase transition smeared by frozen disorder
The simplified model of first-order transition in a media with frozen
long-range transition-temperature disorder is considered. It exhibits the
smearing of the transition due to appearance of the intermediate inhomogeneous
phase with thermodynamics described by the ground state of the short-range
random-field Ising model. Thus the model correctly reproduce the persistence of
first-order transition only in dimensions d > 2, which is found in more
realistic models. It also allows to estimate the behavior of thermodynamic
parameters near the boundaries of the inhomogeneous phase.Comment: 4 page
Magnetic nanocomposites at microwave frequencies
Most conventional magnetic materials used in the electronic devices are
ferrites, which are composed of micrometer-size grains. But ferrites have small
saturation magnetization, therefore the performance at GHz frequencies is
rather poor. That is why functionalized nanocomposites comprising magnetic
nanoparticles (e.g. Fe, Co) with dimensions ranging from a few nm to 100 nm,
and embedded in dielectric matrices (e.g. silicon oxide, aluminium oxide) have
a significant potential for the electronics industry. When the size of the
nanoparticles is smaller than the critical size for multidomain formation,
these nanocomposites can be regarded as an ensemble of particles in
single-domain states and the losses (due for example to eddy currents) are
expected to be relatively small. Here we review the theory of magnetism in such
materials, and we present a novel measurement method used for the
characterization of the electromagnetic properties of composites with
nanomagnetic insertions. We also present a few experimental results obtained on
composites consisting of iron nanoparticles in a dielectric matrix.Comment: 20 pages, 10 figures, 5 table
Preterm birth, neonatal therapies and the risk of childhood cancer
Our aim was to study the impact of preterm birth and neonatal therapies on the risk of childhood cancer using a nationwide, registry-based, case-control design. Combining population-based data from Finnish Medical Birth Registry (MBR) and Finnish Cancer Registry, we identified a total of 2029 patients diagnosed with cancer under the age of 20 years and 10 103 age- and sex-matched controls over the years 1996 to 2014. Information on the prenatal and perinatal conditions was obtained from the MBR. Gestational age was categorized into early (= 37 weeks). Cancer risk among the preterm compared to term neonates was evaluated using conditional logistic regression. We identified 141 cancers among the preterm (20.8% of 678) vs 1888 cancers in the term children (16.5% of 11 454). The risk of any cancer was increased for the preterm (odds ratio [OR] 1.28, 95% confidence interval [CI] 1.06-1.57), especially for the early preterm (OR 1.84, 95% CI 1.16-2.92). The risk of acute myeloid leukemia (AML; OR 2.33, 95% CI 1.25-4.37), retinoblastoma (OR 3.21, 95% CI 1.22-8.41) and germ cell tumors (OR 5.89, 95% CI 2.29-15.18) was increased among the preterm compared to term. Germ cell tumors were diagnosed at a significantly younger age among the preterm. Neonatal therapies, for example, mechanical ventilation, were associated with an increased risk of childhood cancer independent of gestational age. Preterm, especially early preterm birth, is associated with an increased risk of childhood cancer, especially germ cell tumors and AML. Respiratory distress requiring neonatal intervention also appears to be associated with an increased risk.Peer reviewe
Recommended from our members
Modified Visible and Infrared Optical Design for the ITER Upper Ports
This document reports the results of a follow-on optical design study of visible-light and infrared optics for the ITER upper ports, performed by LLNL under contract for the US ITER Project Office. The major objectives of this work are to move the viewing aperture closer to the plasma so that the optical path does not cut through any adjacent blanket shield module other than the module designated for the port; move optics forward into the port tube to increase the aperture size and therefore improve the spatial resolution; assess the trade-off between spatial resolution and spatial coverage by reducing the field of view; and create a mechanical model with a neutron labyrinth. Here we show an optical design incorporating all these aspects. The new design fits into a 360 mm ID tube, as did the previous design. The entrance aperture is increased from 10 mm to 21 mm, with a corresponding increase in spatial resolution. The Airy disk diameter for 3.8 {micro}m wavelength IR light is 5.1 mm at the most distant target point in the field of view. The field of view is reduced from 60 toroidal degrees (full toroidal coverage with 6 cameras) to 50 toroidal degrees. The 10 degrees eliminated are those nearest the camera, which have the poorest view of the divertor plate and in fact saw little of the plate. The Cassegrain telescope that was outside the vacuum windows in the previous design is now in vacuum, along with lenses for visible light. The Cassegrain for visible light is eliminated. An additional set of optical relay lenses is added for the visible and for the IR
Recommended from our members
LSST Camera Optics
The Large Synoptic Survey Telescope (LSST) is a unique, three-mirror, modified Paul-Baker design with an 8.4m primary, a 3.4m secondary, and a 5.0m tertiary feeding a camera system that includes corrector optics to produce a 3.5 degree field of view with excellent image quality (<0.3 arcsecond 80% encircled diffracted energy) over the entire field from blue to near infra-red wavelengths. We describe the design of the LSST camera optics, consisting of three refractive lenses with diameters of 1.6m, 1.0m and 0.7m, along with a set of interchangeable, broad-band, interference filters with diameters of 0.75m. We also describe current plans for fabricating, coating, mounting and testing these lenses and filters
Retrospective evidence for a biological cost of vancomycin resistance determinants in the absence of glycopeptide selective pressures
To estimate the relative fitness differences between glycopeptide-resistant Enterococcus faecium (GREF) and glycopeptide-susceptible E. faecium (GSEF) from yearly surveillance data on the occurrence of GREF in Danish poultry farm environments.
A population genetic model was adapted to retrospectively estimate the biological fitness cost of acquired resistance. Maximization of a likelihood function was used to predict the longitudinal persistence of acquired resistance.
Our analysis suggests strong selection against GREF following the 1995 ban on the glycopeptide growth promoter avoparcin. However, parameterizing the model with two selection coefficients suggesting a reduced negative effect of the acquired resistance on bacterial fitness over time significantly improved the fit of the model. Our analyses suggest that the acquired glycopeptide resistance will persist for >25 years.
Conclusions Acquired resistance determinants in commensal E. faecium populations in Danish farm environments are likely to persist for decades, even in the absence of glycopeptide use
Peptic Fluorescent "Signal-On" and "Signal-Off" Sensors Utilized for the Detection Protein Post-Translational Modifications
Protein post-translational modifications (PTMs) are typically enzyme-catalyzed events generating functional diversification of proteome; thus, multiple PTM enzymes have been validated as potential drug targets. We have previously introduced energy-transfer-based signal-modulation method called quenching resonance energy transfer (QRET), and utilize it to monitor PTM addition or removal using the developed peptide-break technology. Now we have reinvented the QRET technology, and as a model, we introduced the tunable fluorescent "signal-on" and "signal-off" detection scheme in the peptide-break PTM detection. Taking the advantage of time-resolved fluorescence-based single-label detection technology, we were able to select the signal direction upon PTM addition or removal by simply introducing different soluble Eu3+-signal-modulating molecule. This enables the selection of positive signal change upon measurable event, without any additional labeling steps, changes in assay condition or Eu3+-reporter. The concept functionality was demonstrated with four Eu3+-signal modulators in a high-throughput compatible kinase and phosphatase assays using signal-on and signal-off readout at 615 nm or time-resolved Forster resonance energy transfer at 665 nm. Our data suggest that the introduced signal modulation methodology provides a transitional fluorescence-based single-label detection concept not limited only to PTM detection
Quasi-static cracks and minimal energy surfaces
We compare the roughness of minimal energy(ME) surfaces and scalar
``quasi-static'' fracture surfaces(SQF). Two dimensional ME and SQF surfaces
have the same roughness scaling, w sim L^zeta (L is system size) with zeta =
2/3. The 3-d ME and SQF results at strong disorder are consistent with the
random-bond Ising exponent zeta (d >= 3) approx 0.21(5-d) (d is bulk
dimension). However 3-d SQF surfaces are rougher than ME ones due to a larger
prefactor. ME surfaces undergo a ``weakly rough'' to ``algebraically rough''
transition in 3-d, suggesting a similar behavior in fracture.Comment: 7 pages, aps.sty-latex, 7 figure
Recommended from our members
Tomographic wavefront correction for the LSST
The Large Synoptic Survey Telescope (LSST) is a three mirror modified Paul-Baker design with an 8.4m primary, a 3.4m secondary, and a 5.0m tertiary followed by a 3-element refractive corrector producing a 3.5 degree field of view. This design produces image diameters of <0.3 arcsecond 80% encircled energy over its full field of view. The image quality of this design is sufficient to ensure that the final images produced by the telescope will be limited by the atmospheric seeing at an excellent astronomical site. In order to maintain this image quality, the deformations and rigid body motions of the three large mirrors must be actively controlled to minimize optical aberrations. By measuring the optical wavefront produced by the telescope at multiple points in the field, mirror deformations and rigid body motions that produce a good optical wavefront across the entire field may be determined. We will describe the details of the techniques for obtaining these solutions. We will show that, for the expected mirror deformations and rigid body misalignments, the solutions that are found using these techniques produce an image quality over the field that is close to optimal. We will discuss how many wavefront sensors are needed and the tradeoffs between the number of wavefront sensors, their layout and noise sensitivity
A fundamental rule: determining the importance of flow prior to polymer crystallization
A continuum-level model for non-isothermal polymer crystallization following a complex flow is presented, along with a fundamental rule that may be employed to determine if the flow will influence the ensuing crystallization dynamics. This rule is based on two dimensionless parameters: the (Rouse) Weissenberg number, and an inverse Deborah number de�ned by the ratio between the time taken to cool to the melting point versus the stretch relaxation time, which determines the time available for flow-enhanced crystallization. Moreover, we show how the time to reach the melting point can be derived semi-analytically and expressed in terms of the processing conditions in the case of pipe
flow - ubiquitous in polymer processing. Whilst the full numerical model is required to quantitatively predict induction times and spherulite-size distributions, the proposed fundamental rule may be used practically to ensure, or
eliminate, flow-enhanced structures by controlling the processing conditions or material properties. We discuss how
ow-enhanced structures may be revealed only after post-processing annealing, and finally examine previous works that have successfully applied the model to extrusion-based three-dimensional (3D) printing
- âŚ