567 research outputs found
Physiological Reflux and Venous Diameter Change in the Proximal Lower Limb Veins During a Standardised Valsalva Manoeuvre
AbstractObjectives: the aim of this study was to provide normal values for venous diameter at rest, and venous diameter and physiologic venous reflux during a standardised Valsalva manoeuvre. The impact of the patient's sex, body mass index (BMI), and family history was investigated. Material and methods: eighty legs of 40 healthy volunteers were investigated in a supine position. The median age was 28 years (range 20–66 years). The common femoral vein (CFV), the proximal superficial femoral vein (SFV) and the proximal long saphenous vein (LSV) were investigated by duplex sonography. The following parameters were assessed: resting diameter (VDrest) and maximum diameter (VDmax) as well as reflux time (tr) during the Valsalva manoeuvre. The Valsalva manoeuvre was elicited by a forceful expiration into a tube system. The standard values used were a pressure of 30 mmHg, established within 0.5 seconds (s) and maintained over a time period of at least 3 s. Results: mean VDrestand VDmaxwere 8.3±2.2 and 11.1±2.8 mm in the CFV, 5.9±1.3 and 7.2±1.6 mm in the SFV and 3.5±0.9 and 4.3±1.4 mm in the LSV. Mean values for trwere 0.61±0.63 s in the CFV, 0.25±0.26 s in the SFV and 0.28±0.40 s in the LSV. A BMI >22.5 kg/m2was associated with statistically significant larger values for VDrestand tr. If adjusted for BMI, trin the SFV and the LSV did not differ by sex. For healthy subjects with first-degree relatives suffering from varicose veins (n=19), mean VDrestin the SFV as well as VD in the LSV was significantly larger (p=0.02, 0.05, respectively). Coefficients of variation for repeated measurements (VDrest, VDmax, tr) in the same segment varied between 3.3% and 16.4% for the three investigated sites.Conclusions: normal values for VDrestand VDmaxas well as reflux time during a standardised Valsalva manouevre were assessed in the proximal lower limb veins. The influences of BMI, sex and family history were investigated. The described standardised Valsalva manoeuvre led to highly reproducible results and can be recommended for further research projects or as a routine procedure for the assessment of venous reflux
Signatures of Planets in Spatially Unresolved Disks
Main sequence stars are commonly surrounded by debris disks, composed of cold
dust continuously replenished by a reservoir of undetected dust-producing
planetesimals. In a planetary system with a belt of planetesimals (like the
Solar System's Kuiper Belt) and one or more interior giant planets, the
trapping of dust particles in the mean motion resonances with the planets can
create structure in the dust disk, as the particles accumulate at certain
semimajor axes. Sufficiently massive planets may also scatter and eject dust
particles out of a planetary system, creating a dust depleted region inside the
orbit of the planet. In anticipation of future observations of spatially
unresolved debris disks with the Spitzer Space Telescope, we are interested in
studying how the structure carved by planets affects the shape of the disk's
spectral energy distribution (SED), and consequently if the SED can be used to
infer the presence of planets. We numerically calculate the equilibrium spatial
density distributions and SEDs of dust disks originated by a belt of
planetesimals in the presence of interior giant planets in different planetary
configurations, and for a representative sample of chemical compositions. The
dynamical models are necessary to estimate the enhancement of particles near
the mean motion resonances with the planets, and to determine how many
particles drift inside the planet's orbit. Based on the SEDs and predicted
colors we discuss what types of planetary systems can be
distinguishable from one another and the main parameter degeneracies in the
model SEDs.Comment: 40 pages (pre-print form), including 16 figures. Published in ApJ
200
A Survey of Molecular Hydrogen in the Crab Nebula
We have carried out a near-infrared, narrow-band imaging survey of the Crab
Nebula, in the H2 2.12 micron and Br-gamma 2.17 micron lines, using the Spartan
Infrared camera on the SOAR Telescope. Over a 2.8' x 5.1' area that encompasses
about 2/3 of the full visible extent of the Crab, we detect 55 knots that emit
strongly in the H2 line. We catalog the observed properties of these knots. We
show that they are in or next to the filaments that are seen in
optical-passband emission lines. Comparison to HST [S II] and [O III] images
shows that the H2 knots are strongly associated with compact regions of
low-ionization gas. We also find evidence of many additional, fainter H2
features, both discrete knots and long streamers following gas that emits
strongly in [S II]. A pixel-by-pixel analysis shows that about 6 percent of the
Crab's projected surface area has significant H2 emission that correlates with
[S II] emission. We measured radial velocities of the [S II] lambda6716
emission lines from 47 of the cataloged knots and find that most are on the far
(receding) side of the nebula. We also detect Br-gamma emission. It is right at
the limit of our survey, and our Br-gamma filter cuts off part of the expected
velocity range. But clearly the Br-gamma emission has a quite different
morphology than the H2 knots, following the long linear filaments that are seen
in H-alpha and in [O III] optical emission lines.Comment: Accepted for publication in the ApJ
Examining the Connections within the Startup Ecosystem: A Case Study of St. Louis
This paper documents the resurgence of entrepreneurial activity in St. Louis by reporting on the collaboration and local learning within the startup community. This activity is happening both between entrepreneurs and between organizations that provide support, such as mentoring and funding, to entrepreneurs. As these connections deepen, the strength of the entrepreneurial ecosystem grows. Another finding from the research is that activity-based events, where entrepreneurs have the chance to use and practice the skills needed to grow their businesses, are most useful. St. Louis provides a multitude of these activities, such as Startup Weekend, 1 Million Cups, Code Until Dawn, StartLouis, and GlobalHack. Some of these are St. Louis specific, but others have nationwide or global operations, providing important implications for other cities
Recommended from our members
Field testing of the Cobra Seal System
The Cobra Seal System consists of a passive fiber optic seal and verification equipment which have been modified to take advantage of current technology. The seal permits on-site verification without requiring replacement of the seal. The modifications to the original Cobra Seal System extended the maximum fiber optic cable length from 1 meter to 10 meters. This improvement allowed the Cobra Seal to be considered for application on dry irradiated fuel storage canisters at two Canadian facilities. These canisters are located in an exterior environment exposed to extreme weather conditions. This paper describe the application of the Cobra Seal to these canisters, a housing for the protection of the Cobra Seal body from the environment, and some preliminary results of the IAEA field tests. 4 refs
Measurement of the diffractive structure function in deep inelastic scattering at HERA
This paper presents an analysis of the inclusive properties of diffractive
deep inelastic scattering events produced in interactions at HERA. The
events are characterised by a rapidity gap between the outgoing proton system
and the remaining hadronic system. Inclusive distributions are presented and
compared with Monte Carlo models for diffractive processes. The data are
consistent with models where the pomeron structure function has a hard and a
soft contribution. The diffractive structure function is measured as a function
of \xpom, the momentum fraction lost by the proton, of , the momentum
fraction of the struck quark with respect to \xpom, and of . The \xpom
dependence is consistent with the form \xpoma where
in all bins of and
. In the measured range, the diffractive structure function
approximately scales with at fixed . In an Ingelman-Schlein type
model, where commonly used pomeron flux factor normalisations are assumed, it
is found that the quarks within the pomeron do not saturate the momentum sum
rule.Comment: 36 pages, latex, 11 figures appended as uuencoded fil
Measurement of Jet Shapes in Photoproduction at HERA
The shape of jets produced in quasi-real photon-proton collisions at
centre-of-mass energies in the range GeV has been measured using the
hadronic energy flow. The measurement was done with the ZEUS detector at HERA.
Jets are identified using a cone algorithm in the plane with a
cone radius of one unit. Measured jet shapes both in inclusive jet and dijet
production with transverse energies GeV are presented. The jet
shape broadens as the jet pseudorapidity () increases and narrows
as increases. In dijet photoproduction, the jet shapes have been
measured separately for samples dominated by resolved and by direct processes.
Leading-logarithm parton-shower Monte Carlo calculations of resolved and direct
processes describe well the measured jet shapes except for the inclusive
production of jets with high and low . The observed
broadening of the jet shape as increases is consistent with the
predicted increase in the fraction of final state gluon jets.Comment: 29 pages including 9 figure
A Search for Jet Handedness in Hadronic Decays
We have searched for signatures of polarization in hadronic jets from decays using the ``jet handedness'' method. The polar angle
asymmetry induced by the high SLC electron-beam polarization was used to
separate quark jets from antiquark jets, expected to be left- and
right-polarized, respectively. We find no evidence for jet handedness in our
global sample or in a sample of light quark jets and we set upper limits at the
95% C.L. of 0.063 and 0.099 respectively on the magnitude of the analyzing
power of the method proposed by Efremov {\it et al.}Comment: Revtex, 8 pages, 2 figure
Plastisol Foaming Process. Decomposition of the Foaming Agent, Polymer Behavior in the Corresponding Temperature Range and Resulting Foam Properties
The decomposition of azodicarbonamide, used as foaming agent in PVC - plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min-1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g -1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol-1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse
Observation of Scaling Violations in Scaled Momentum Distributions at HERA
Charged particle production has been measured in deep inelastic scattering
(DIS) events over a large range of and using the ZEUS detector. The
evolution of the scaled momentum, , with in the range 10 to 1280
, has been investigated in the current fragmentation region of the Breit
frame. The results show clear evidence, in a single experiment, for scaling
violations in scaled momenta as a function of .Comment: 21 pages including 4 figures, to be published in Physics Letters B.
Two references adde
- …