546 research outputs found

    The magnetoresistance of homogeneous and heterogeneous silver-rich silver selenide

    Get PDF
    The magnetoresistance (MR) effect of the low-temperature phase of silver selenide (-Ag2 + Se) is measured as a function of composition. Very small composition variations in the order of = 10–6 are achieved by coulometric titration and can be performed simultaneously during the MR measurement. A homogeneous Ag2 + Se shows an ordinary magnetoresistance (OMR) effect, which can be well described by the two-band model. For silver selenide with a heterogenous silver excess, we found quite a different MR behavior. Up to a minor silver excess of 1×10–4 10–2) shows again an OMR effect

    Exsolved nickel nanoparticles acting as oxygen storage reservoirs and active sites for redox CH4 conversion

    Get PDF
    The growing demand for H2 and syngas requires the development of new, more efficient processes and materials for their production, especially from CH4 that is a widely available resource. One process that has recently received increased attention is chemical looping CH4 partial oxidation, which, however, poses stringent requirements on material design, including fast oxygen exchange and high storage capacity, high reactivity toward CH4 activation, and resistance to carbon deposition, often only met by composite materials. Here we design a catalytically active material for this process, on the basis of exsolution from a porous titanate. The exsolved Ni particles act as both oxygen storage centers and as active sites for CH4 conversion under redox conditions. We control the extent of exsolution, particle size, and population of Ni particles in order to tune the oxygen capacity, reactivity, and stability of the system and, at the same time, obtain insights into parameters affecting and controlling exsolution

    Does the menstrual cycle modulate how trustworthy a woman sounds? Evidence from sighted and blind participants

    Get PDF
    The attractiveness of a woman’s voice is affected by her menstrual cycle. We investigated whether the cycle also affects the perceived trustworthiness of a speaker, and whether the speech content plays a role. Because blind people have been found to possess superior voice processing capabilities, we also tested blind individuals. We recorded women while they were uttering neutral sentences and sentences suggesting a context in which you want to get to know someone (affiliation context). Each woman was recorded twice, once during the fertile late follicular phase and once during the luteal phase. Recordings from both cycle phases were paired and independent participants were asked to choose the voice sample that sounded more trustworthy (Block 1) and more attractive (Block 2). Blind and sighted individuals perceived the voices in a similar way. Voices were rated as being more trustworthy around ovulation (irrespective of content). Affiliation sentences sounded more attractive when recorded during the luteal phase whereas there was no preference for neutral sentences

    The AirSpeck family of static and mobile wireless air quality monitors

    Get PDF

    Challenges for Developing Rechargeable Room-Temperature Sodium Oxygen Batteries

    Full text link
    © 2018 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim The development of high energy-density and low-cost energy storage devices requires new chemistry beyond the horizon of current state-of-the-art lithium-ion batteries. Recently, sodium/oxygen (Na/O2) batteries have attracted great attention as one possible battery type among the new generation of rechargeable batteries. They convince with superior energy density, a relatively simple cell reaction, and abundance of sodium. Research on Na/O2 batteries has progressed quickly in recent years. However, a fundamental understanding underpinning the complex chemical/electrochemical side reactions is still insufficient, and many challenges remain unsolved for real practical applications. Herein, recent achievements and remaining issues for the development of rechargeable Na/O2 batteries are summarized. The discussion focuses on cell reaction mechanisms as well as cathode materials, sodium anodes, and electrolytes as key components of this type of battery. Furthermore, perspectives for future research and technological advances of Na/O2 batteries are outlined

    Identification of Lithium Compounds on Surfaces of Lithium Metal Anode with Machine-Learning-Assisted Analysis of ToF-SIMS Spectra

    Get PDF
    Detailed knowledge about contamination and passivation compounds on the surface of lithium metal anodes (LMAs) is essential to enable their use in all-solid-state batteries (ASSBs). Time-of-flight secondary ion mass spectrometry (ToF-SIMS), a highly surface-sensitive technique, can be used to reliably characterize the surface status of LMAs. However, as ToF-SIMS data are usually highly complex, manual data analysis can be difficult and time-consuming. In this study, machine learning techniques, especially logistic regression (LR), are used to identify the characteristic secondary ions of 5 different pure lithium compounds. Furthermore, these models are applied to the mixture and LMA samples to enable identification of their compositions based on the measured ToF-SIMS spectra. This machine-learning-based analysis approach shows good performance in identifying characteristic ions of the analyzed compounds that fit well with their chemical nature. Moreover, satisfying accuracy in identifying the compositions of unseen new samples is achieved. In addition, the scope and limitations of such a strategy in practical applications are discussed. This work presents a robust analytical method that can assist researchers in simplifying the analysis of the studied lithium compound samples, offering the potential for broader applications in other material systems

    Design Strategies to Enable the Efficient Use of Sodium Metal Anodes in High-Energy Batteries

    Full text link
    © 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Sodium-based batteries have attracted considerable attention and are recognized as ideal candidates for large-scale and low-cost energy storage. Sodium (Na) metal anodes are considered as one of the most promising anodes for next-generation, high-energy, Na-based batteries owing to their high theoretical specific capacity (1166 mA h g−1) and low standard electrode potential. Herein, an overview of the recent developments in Na metal anodes for high-energy batteries is provided. The high reactivity and large volume expansion of Na metal anodes during charge and discharge make the electrode/electrolyte interphase unstable, leading to the formation of Na dendrites, short cycle life, and safety issues. Design strategies to enable the efficient use of Na metal anodes are elucidated, including liquid electrolyte engineering, electrode/electrolyte interface optimization, sophisticated electrode construction, and solid electrolyte engineering. Finally, the remaining challenges and future research directions are identified. It is hoped that this progress report will shape a consistent view of this field and provide inspiration for future research to improve Na metal anodes and enable the development of high-energy sodium batteries

    Analyzing powers Ayy, Axx, Axz and Ay in the dd->3Hen reaction at 270 MeV

    Full text link
    The data on the tensor Ayy, Axx, Axz and vector Ay analyzing powers in the dd->3Hen obtained at Td= 270 MeV in the angular range 0 - 110 degrees in the c.m. are presented. The observed negative sign of the tensor analyzing powers Ayy, Axx and Axz at small angles clearly demonstrate the sensitivity to the ratio of the D and S wave component of the 3He wave function. However, the one-nucleon exchange calculations by using the standard 3He wave functions have failed to reproduce the strong variation of the tensor analyzing powers as a function of the angle in the c.m.Comment: 8 pages, 7 figures, 4 tables. Submitted to EPJ
    corecore