979 research outputs found
Common Bile-Duct Mucosa in Choledochoduodenostomy Patients — Histological and Histochemical Study
We describe the histological and histochemical changes of the common bile-duct mucosa in specimens
obtained by means of peroral cholangioscopy, 1–12 years after choledochoduodenal anastomosis. Our
findings — hyperplasia of the superficial epithelium, metaplastic goblet cells containing predominantly
acid sialomucins, and pyloric-like gland formation containing neutral mucins — express a morphological
and functional differentiation of the common bile-duct mucosa that probably facilitates its survival in a
different environment. We consider that these adaptive changes may explain the uneventful long-term
postoperative period of choledochoduodenostomized patients
A new method to retrieve the real part of the equivalent refractive index of atmospheric aerosols
This document is the Accepted Manuscript version of the following article: S. Vratolis, et al, ‘A new method to retrieve the real part of the equivalent refractive index of atmospheric aerosols’, Journal of Aerosol Science, Vol. 117: 54-62, March 2018. Under embargo until 29 December 2019. The final, published version is available online at DOI: https://doi.org/10.1016/j.jaerosci.2017.12.013.In the context of the international experimental campaign Hygroscopic Aerosols to Cloud Droplets (HygrA-CD, 15 May to 22 June 2014), dry aerosol size distributions were measured at Demokritos station (DEM) using a Scanning Mobility Particle Sizer (SMPS) in the size range from 10 to 550 nm (electrical mobility diameter), and an Optical Particle Counter (OPC model Grimm 107 operating at the laser wavelength of 660 nm) to acquire the particle size distribution in the size range of 250 nm to 2.5 μm optical diameter. This work describes a method that was developed to align size distributions in the overlapping range of the SMPS and the OPC, thus allowing us to retrieve the real part of the aerosol equivalent refractive index (ERI). The objective is to show that size distribution data acquired at in situ measurement stations can provide an insight to the physical and chemical properties of aerosol particles, leading to better understanding of aerosol impact on human health and earth radiative balance. The resulting ERI could be used in radiative transfer models to assess aerosol forcing direct effect, as well as an index of aerosol chemical composition. To validate the method, a series of calibration experiments were performed using compounds with known refractive index (RI). This led to a corrected version of the ERI values, (ERICOR). The ERICOR values were subsequently compared to model estimates of RI values, based on measured PM2.5 chemical composition, and to aerosol RI retrieved values by inverted lidar measurements on selected days.Peer reviewe
The distribution of snow black carbon observed in the Arctic and compared to the GISS-PUCCINI model
In this study, we evaluate the ability of the latest NASA GISS composition-climate model, GISS-E2-PUCCINI, to simulate the spatial distribution of snow BC (sBC) in the Arctic relative to present-day observations. Radiative forcing due to BC deposition onto Arctic snow and sea ice is also estimated. Two sets of model simulations are analyzed, where meteorology is linearly relaxed towards National Centers for Environmental Prediction (NCEP) and towards NASA Modern Era Reanalysis for Research and Applications (MERRA) reanalyses. Results indicate that the modeled concentrations of sBC are comparable with present-day observations in and around the Arctic Ocean, except for apparent underestimation at a few sites in the Russian Arctic. That said, the model has some biases in its simulated spatial distribution of BC deposition to the Arctic. The simulations from the two model runs are roughly equal, indicating that discrepancies between model and observations come from other sources. Underestimation of biomass burning emissions in Northern Eurasia may be the main cause of the low biases in the Russian Arctic. Comparisons of modeled aerosol BC (aBC) with long-term surface observations at Barrow, Alert, Zeppelin and Nord stations show significant underestimation in winter and spring concentrations in the Arctic (most significant in Alaska), although the simulated seasonality of aBC has been greatly improved relative to earlier model versions. This is consistent with simulated biases in vertical profiles of aBC, with underestimation in the lower and middle troposphere but overestimation in the upper troposphere and lower stratosphere, suggesting that the wet removal processes in the current model may be too weak or that vertical transport is too rapid, although the simulated BC lifetime seems reasonable. The combination of observations and modeling provides a comprehensive distribution of sBC over the Arctic. On the basis of this distribution, we estimate the decrease in snow and sea ice albedo and the resulting radiative forcing. We suggest that the albedo reduction due to BC deposition presents significant space-time variations, with highest mean reductions of 1.25% in the Russian Arctic, which are much larger than those in other Arctic regions (0.39% to 0.64%). The averaged value over the Arctic north of 66&deg; N is 0.4–0.6% during spring, leading to regional surface radiative forcings of 0.7, 1.1 and 1.0 W m<sup>−2</sup> in spring 2007, 2008 and 2009, respectively
Manufacturing of hybrid drug delivery systems by utilizing the fused filament fabrication (FFF) technology
Quantitative assessment of the variability in chemical profiles from source apportionment analysis of PM10 and PM2.5 at different sites within a large metropolitan area
The study aims to assess the differences between the chemical profiles of the major anthropogenic and natural PM sources in two areas with different levels of urbanization and traffic density within the same urban agglomeration. A traffic site and an urban background site in the Athens Metropolitan Area have been selected for this comparison. For both sites, eight sources were identified, with seven of them being common for the two sites (Mineral Dust, non-Exhaust Emissions, Exhaust Emissions, Heavy Oil Combustion, Sulfates & Organics, Sea Salt and Biomass Burning) and one, site-specific (Nitrates for the traffic site and Aged Sea Salt for the urban background site). The similarity between the source profiles was quantified using two statistical analysis tools, Pearson correlation (PC) and Standardized Identity Distance (SID). According to Pearson coefficients five out of the eight source profiles present high (PC > 0.8) correlation (Mineral Dust, Biomass Burning, Sea Salt, Sulfates and Heavy Oil Combustion), one presented moderate (0.8 > PC > 0.6) correlation (Exhaust) and two low/no (PC < 0.6) correlation (non-Exhaust, Nitrates/Aged Sea Salt). The source profiles that appear to be more correlated are those of sources that are not expected to have high spatial variability because there are either natural/secondary and thus have a regional character or are emitted outside the urban agglomeration and are transported to both sites. According to SID four out of the eight sources have high statistical correlation (SID < 1) in the two sites (Mineral Dust, Sea salt, Sulfates, Heavy Oil Combustion). Biomass Burning was found to be the source that yielded different results from the two methodologies. The careful examination of the source profile of that source revealed the reason for this discrepancy. SID takes all the species of the profile equally into account, while PC might be disproportionally affected by a few numbers of species with very high concentrations. It is suggested, based on the findings of this work, that the combined use of both tools can lead the users to a thorough evaluation of the similarity of source profiles. This work is, to the best of our knowledge, the first time a study is focused on the quantitative comparison of the source profiles for sites inside the same urban agglomeration using statistical indicators.The study was supported by “CALIBRA/EYIE” (MIS 5002799) and “PANhellenic infrastructure for Atmospheric Composition and climatE change” (MIS 5021516) implemented under the Action “Reinforcement of the Research and Innovation Infrastructure”, funded by the Operational Programme “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). Collection and chemical analysis of samples were supported by LIFE + AIRUSE EU project (ENV/ES/584). Partial support was also received by H2020 ERAPLANET/SMURBS ERANET GA No 689443.Peer reviewe
Size resolved mass concentration and elemental composition of atmospheric aerosols over the Eastern Mediterranean area
International audienceA Berner low pressure impactor was used to collect size-segregated aerosol samples at Finokalia, located on the north-eastern coast of Crete, Greece during July 2000 and January 2001. Several samples were also collected during the summer campaign aboard the research vessel "AEGAIEO" in the Aegean Sea. Gravimetric analysis and inversion techniques yielded daily PM1 and PM10 mass concentrations. The samples were also analysed by PIXE giving the elemental size distributions of Al, Si, K, Ca, Ti, Mn, Fe, Sr, S, Cl, Ni, V, Cu, Cr, Zn, and Pb. The crustal elements and sea-salt had a unimodal supermicron size distribution. Sulphur was found predominantly in submicron fractions. K, V, and Ni exhibited a bimodal distribution with a submicron mode produced by forest fires and oil combustion. The anthropogenic elements had broad and not well-defined distributions. The time series for PM1 and PM10 mass and elemental concentrations showed both daily and seasonal variation. Higher mass concentrations were observed during two incursions of Saharan dust, whilst higher concentrations of S, Cu, Zn, and Pb were encountered in samples collected in air masses arriving from northern Greece or the western coast of Turkey. Elevated concentrations of chlorine were found in samples with air masses either originating above the Atlantic Ocean and arriving at Finokalia via western Europe or recirculating over the western coast of the Black Sea
Mesoscale modeling of combined aerosol and photo-oxidant processes in the Eastern Mediterranean
International audienceParticulate matter and photo-oxidant processes in the Eastern Mediterranean have been studied using the UAM-AERO mesoscale air quality model in conjunction with the NILU-CTM regional model. Meteorological data were obtained from the RAMS prognostic meteorological model. The modeling domain includes the eastern Mediterranean area between the Greek mainland and the island of Crete. The modeling system is applied to study the atmospheric processes in three periods, i.e. 13?16 July 2000, 26?30 July 2000 and 7?14 January 2001. The spatial and temporal distributions of both gaseous and particulate matter pollutants have been extensively studied together with the identification of major emission sources in the area. The modeling results were compared with field data obtained in the same period. The objective of the current modeling work was mainly to apply the UAM-AERO mesoscale model in the eastern Mediterranean in order to assess the performed field campaigns and determine that the applied mesoscale model is fit for this purpose. Comparison of the modeling results with measured data was performed for a number of gaseous and aerosol species. The UAM-AERO model underestimates the PM10 measured concentrations during summer and winter campaigns. Discrepancies between modeled and measured data are attributed to unresolved particulate matter emissions. Particulate matter in the area is mainly composed by sulphate, sea salt and crustal materials, and with significant amounts of nitrate, ammonium and organics. During winter the particulate matter and oxidant concentrations were lower than the summer values
Annual cycle of hygroscopic properties and mixing state of the suburban aerosol in Athens, Greece
The hygroscopic properties of atmospheric aerosol were
investigated at a suburban environment in Athens, Greece, from August 2016
to July 2017. The growth factor distribution probability density function (GF-PDF) and mixing state were determined with a hygroscopicity tandem
differential mobility analyser (HTDMA). Four dry particle sizes
(D0) were selected to be analysed in terms of their hygroscopic
properties at 90 % relative humidity. The annual mean GFs for D0 = 30, 50, 80 and 250 nm were found to be equal to 1.28, 1.11,
1.13 and 1.22, respectively. The hygroscopic growth spectra were divided
into two distinct hygroscopic ranges: a non- and/or slightly hygroscopic mode
(GF < 1.12) and a moderately hygroscopic mode (GF > 1.12), which are
representative of a suburban environment influenced by local/urban emissions
and background aerosol. The standard deviation σ of the GF-PDF was
employed as a measure of the mixing state of ambient aerosol. The 30 nm
particles were mostly internally mixed, whereas larger particles were found
to be externally mixed, either with a distinct bimodal structure or with
partly overlapping modes. Cluster analysis on the hourly dry number size
distributions was performed to identify the link between aerosol
hygroscopicity and aerosol emission sources and formation processes. The
size distributions were classified into five groups, with the “mixed urban
and regional background” aerosol (67 %) and the “fresh traffic-related
particles” from the neighbourhood urban area (15 %) accounting for more
than 80 % of the results. The hygroscopic properties for 50 and 80 nm
were found to be similar in all cases, indicating particles of similar
nature and origin across these sizes. This was also confirmed through the
modal analysis of the average number size distributions for each cluster;
the 50 and 80 nm particles were found to belong to the same Aitken mode
in most cases. The 250 nm particles (i.e. accumulation mode) were generally
more hygroscopic than Aitken particles but less hygroscopic than the 30 nm
particles (nuclei mode).</p
A comparative analysis of the causes of air pollution in three cities of the Danube region: implications for the implementation of the air quality directives
The causes of air pollution in three cities of the Danube region (Budapest, Sofia and Zagreb) were studied using datasets of measurements and modelling tools. The contributions from different activity sectors, including natural sources and their geographical origin were quantified. It was observed that most of the pollutants are emitted locally. However, the medium to long range transport may be also considerable. On the basis of the output of the source identification, a series of measures were proposed to deal wtih the pollution problem at local, national and international levels.JRC.H.2-Air and Climat
- …