8,333 research outputs found
High resolution characterisation of microstructural evolution in RbFeSe crystals on annealing
The superconducting and magnetic properties of phase-separated
AFeSe compounds are known to depend on post-growth heat
treatments and cooling profiles. This paper focusses on the evolution of
microstructure on annealing, and how this influences the superconducting
properties of RbFeSe crystals. We find that the minority phase in
the as-grown crystal has increased unit cell anisotropy (c/a ratio), reduced Rb
content and increased Fe content compared to the matrix. The microstructure is
rather complex, with two-phase mesoscopic plate-shaped features aligned along
{113} habit planes. The minority phase are strongly facetted on the {113}
planes, which we have shown to be driven by minimising the volume strain energy
introduced as a result of the phase transformation. Annealing at 488K results
in coarsening of the mesoscopic plate-shaped features and the formation of a
third distinct phase. The subtle differences in structure and chemistry of the
minority phase(s) in the crystals are thought to be responsible for changes in
the superconducting transition temperature. In addition, scanning photoemission
microscopy has clearly shown that the electronic structure of the minority
phase has a higher occupied density of states of the low binding energy Fe3d
orbitals, characteristic of crystals that exhibit superconductivity. This
demonstrates a clear correlation between the Fe-vacancy-free phase with high
c/a ratio and the electronic structure characteristics of the superconducting
phase.Comment: 6 figures v2 is exactly the same as v1. The typesetting errors in the
abstract have been correcte
Does physical activity moderate the association between alcohol drinking and all-cause, cancer and cardiovascular diseases mortality risk? A pooled analysis of eight British population cohorts
OBJECTIVE: To examine whether physical activity (PA) moderates the association between alcohol intake and all-cause mortality, cancer mortality and cardiovascular diseases (CVDs) mortality. DESIGN: Prospective study using 8 British population-based surveys, each linked to cause-specific mortality: Health Survey for England (1994, 1998, 1999, 2003, 2004 and 2006) and Scottish Health Survey (1998 and 2003). PARTICIPANTS: 36 370 men and women aged 40 years and over were included with a corresponding 5735 deaths and a mean of 353 049 person-years of follow-up. EXPOSURES: 6 sex-specific categories of alcohol intake (UK units/week) were defined: (1) never drunk; (2) ex-drinkers; (3) occasional drinkers; (4) within guidelines (35 (women) >49 (men)). PA was categorised as inactive (≤7 MET-hour/week), active at the lower (>7.5 MET-hour/week) and upper (>15 MET-hour/week) of recommended levels. MAIN OUTCOMES AND MEASURES: Cox proportional-hazard models were used to examine associations between alcohol consumption and all-cause, cancer and CVD mortality risk after adjusting for several confounders. Stratified analyses were performed to evaluate mortality risks within each PA stratum. RESULTS: We found a direct association between alcohol consumption and cancer mortality risk starting from drinking within guidelines (HR (95% CI) hazardous drinking: 1.40 (1.11 to 1.78)). Stratified analyses showed that the association between alcohol intake and mortality risk was attenuated (all-cause) or nearly nullified (cancer) among individuals who met the PA recommendations (HR (95% CI)). CONCLUSIONS: Meeting the current PA public health recommendations offsets some of the cancer and all-cause mortality risk associated with alcohol drinking
Randomized Benchmarking of Quantum Gates
A key requirement for scalable quantum computing is that elementary quantum
gates can be implemented with sufficiently low error. One method for
determining the error behavior of a gate implementation is to perform process
tomography. However, standard process tomography is limited by errors in state
preparation, measurement and one-qubit gates. It suffers from inefficient
scaling with number of qubits and does not detect adverse error-compounding
when gates are composed in long sequences. An additional problem is due to the
fact that desirable error probabilities for scalable quantum computing are of
the order of 0.0001 or lower. Experimentally proving such low errors is
challenging. We describe a randomized benchmarking method that yields estimates
of the computationally relevant errors without relying on accurate state
preparation and measurement. Since it involves long sequences of randomly
chosen gates, it also verifies that error behavior is stable when used in long
computations. We implemented randomized benchmarking on trapped atomic ion
qubits, establishing a one-qubit error probability per randomized pi/2 pulse of
0.00482(17) in a particular experiment. We expect this error probability to be
readily improved with straightforward technical modifications.Comment: 13 page
Recent Advances in Thermoplastic Puncture-Healing Polymers
Self-healing materials provide a route for enhanced damage tolerance in materials for aerospace applications. In particular, puncture-healing upon impact has the potential to mitigate significant damage caused by high velocity micrometeoroid impacts. This type of material also has the potential to improve damage tolerance in load bearing structures to enhance vehicle health and aircraft durability. The materials being studied are those capable of instantaneous puncture healing, providing a mechanism for mechanical property retention in lightweight structures. These systems have demonstrated healing capability following penetration of fast moving projectiles -- velocities that range from 9 mm bullets shot from a gun (approx.330 m/sec) to close to micrometeoroid debris velocities of 4800 m/sec. In this presentation, we report on a suite of polymeric materials possessing this characteristic. Figure 1 illustrates the puncture healing concept. Puncture healing in these materials is dependent upon how the combination of a polymer's viscoelastic properties responds to the energy input resulting from the puncture event. Projectile penetration increases the temperature in the vicinity of the impact. Self-healing behavior occurs following puncture, whereby energy must be transferred to the material during impact both elastically and inelastically, thus establishing two requirements for puncture healing to occur: a.) The need for the puncture event to produce a local melt state in the polymer material and b.) The molten material has to have sufficient melt elasticity to snap back and close the hole. 1,2 Previous ballistic testing studies revealed that Surlyn materials warmed up to a temperature approx.98 C during projectile puncture (3 C higher than it s melting temperature). 1,2 The temperature increase produces a localized flow state and the melt elasticity to snap back thus sealing the hole. Table 1 lists the commercially polymers studied here, together with their physical properties. The polymers were selected based on chemical structure, tensile strengths, tensile moduli, glass transition temperature, melting temperatures, and impact strength. The thermal properties of the polymers were characterized by Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). Mechanical properties were assessed by a Sintech 2W instron according to ASTM D1708 or D638 at crosshead speeds of 5.08 cm/min. 7.6 cm x 7.6 cm panels of the different materials were prepared and ballistic testing was performed at various temperatures. The panels were shot with a .223 caliber semiautomatic rifle from a distance of 23 meters at various temperatures. Chronographs were used to measure initial and final bullet velocity. Temperatures at the site of impact were measured using a FLIR ThermaCAM S60 thermal camera. A Vision Research model Phantom 9 high speed video camera was used to capture high speed video footage of ballistics testing
99mTc-interleukin-2 scintigraphy in normal subjects and in patients with autoimmune thyroid diseases: a feasibility study
n/
Examining a potential brown treesnake transport pathway: shipments from Guam
Shipments of cargo and household goods have been identified as pathways for brown treesnake (Boiga irregularis) transport from Guam to other locations. We analyzed data regarding shipments of military household goods leaving Guam during 2006 to 2009 to identify the potential for human transport of brown treesnakes to the United States by determining when shipments most commonly occur and identifying primary receiving areas. We found that the number of shipments was highest during the months of May and June and that California receives more shipments (23% of total shipments) than any other location. Approximately 98% of shipments originated from the U.S. Navy and U.S. Air Force, with naval shipments increasing over time. Guam is currently undergoing a military buildup during which shipments are expected to increase, suggesting the need for increased vigilance and prioritization of inspection efforts
Charged Scalar Particles and Leptonic Decay
Charged scalar particles introduced in some extensions of the standard model
can induce leptonic decay at tree level. We find that with some charged
SU(2)-singlet scalar particles, like ones introduced in Zee-type models,
leptonic decay width is always smaller than what is predicted by the standard
model, therefore they may offer a natural solution to decay puzzle. To
be more specific, we examine some Zee-type models in detail to see if at the
same time they are acceptable in particle physics, cosmology and astrophysics.
It is shown that decay data do put some constrains on these models.Comment: ICTP Report No. IC/93/31, 12 pages, Latex, one figure is not
included, it is available upon deman
OXIDATION RATES OF MAJOR FATTY ACIDS IN FASTING NEONATAL PIGS
Thirty-two pigs were used to compare the oxidation rates of uniformly labeled (U-14C) palmitic (16:0), stearic (18:0), oleic (18:1) and linoleic (18:2) acids in fasting neonatal pigs. The pigs were allowed to nurse the sow for 24 to 48 h following birth. Subsequently, they were removed, an indwelling catheter was surgically placed in the external iliac vein and the pigs were fasted for 12 h to attain a postabsorptive state. The 14C fatty acids were administered as a single infusion (10 / μCi) via the catheter, and recovery of the label as expired 14CO2 was determined at 45-min intervals for a 6-h period. Blood samples were taken following the infusion (15, 60, 120, 240, 360 min) to monitor activity maintained within the free fatty acid (FFA) fraction of the plasma pool. The oxidation rate of each fatty acid was corrected for the difference in dose dilution using a uniform factor based on plasma concentration of 18:1. The cumulative 6-h 14CO2 recovery rates (percentage of dose) were 19.1, 6.6, 30.1 and 13.1% for 16:0, 18:0, 18:1 and 18:2, respectively. Oleic acid was oxidized at a more (P\u3c.05) rapid rate than the other fatty acids. Palmitic acid and 18:2 were oxidized more rapidly than 18:0, although the difference between 18:0 and 18:2 was not significant. Plasma FFA pools differed with respect to the proportion of infused activity remaining at various times after administration. At 60 and 120 min postinfusion, the greatest (P\u3c.05) proportion of activity was maintained in the 18:1 pool (11.9 and 6.6%, respectively, vs 7.7 and 4.3% for 16:0, 6.9 and 3.9% for 18:2 and 3.6 and 2.2% for 18:0). Palmitic acid and 18:2 had a greater (P\u3c.05) level of activity in the plasma FFA pool at 60 min than did 18:0. This same pattern was observed through 2 h, but by 240 min postinfusion, the proportion of activity remaining in each of the plasma pools was similar. Rate of oxidation appeared to correspond with plasma concentration and proportion of activity remaining in the plasma FFA pool
Microstructural analysis of phase separation in iron chalcogenide superconductors
The interplay between superconductivity, magnetism and crystal structure in
iron-based superconductors is a topic of great interest amongst the condensed
matter physics community as it is thought to be the key to understanding the
mechanisms responsible for high temperature superconductivity. Alkali metal
doped iron chalcogenide superconductors exhibit several unique characteristics
which are not found in other iron-based superconducting materials such as
antiferromagnetic ordering at room temperature, the presence of ordered iron
vacancies and high resistivity normal state properties. Detailed
microstructural analysis is essential in order to understand the origin of
these unusual properties. Here we have used a range of complementary scanning
electron microscope based techniques, including high-resolution electron
backscatter di raction mapping, to assess local variations in composition and
lattice parameter with high precision and sub-micron spatial resolution. Phase
separation is observed in the Csx Fe2-ySe2 crystals, with the minor phase
distributed in a plate-like morphology throughout the crystal. Our results are
consistent with superconductivity occurring only in the minority phase.Comment: Accepted for publication in a special edition of Supercond. Sci.
Techno
- …