38 research outputs found
A mild alkali treated jute fibre controlling the hydration behaviour of greener cement paste
To reduce the antagonistic effect of jute fibre on the setting and hydration of jute reinforced cement, modified jute fibre reinforcement would be a unique approach. The present investigation deals with the effectiveness of mild alkali treated (0.5%) jute fibre on the setting and hydration behaviour of cement. Setting time measurement, hydration test and analytical characterizations of the hardened samples (viz., FTIR, XRD, DSC, TGA and free lime estimation) were used to evaluate the effect of alkali treated jute fibre. From the hydration test, the time (t) required to reach maximum temperature for the hydration of control cement sample is estimated to be 860 min, whilst the time (t) is measured to be 1040 min for the hydration of a raw jute reinforced cement sample. However, the time (t) is estimated to be 1020 min for the hydration of an alkali treated jute reinforced cement sample. Additionally, from the analytical characterizations, it is determined that fibre-cement compatibility is increased and hydration delaying effect is minimized by using alkali treated jute fibre as fibre reinforcement. Based on the analyses, a model has been proposed to explain the setting and hydration behaviour of alkali treated jute fibre reinforced cement composite
Application of chitosan functionalized with 3,4-dihydroxy benzoic acid moiety for on-line preconcentration and determination of trace elements in water samples
Chitosan resin functionalized with 3,4-dihydroxy benzoic acid (CCTS-DHBA resin) was used as a packing material for flow injection (FI) on-line mini-column preconcentration in combination with inductively coupled plasma-atomic emission spectrometry (ICP-AES) for the determination of trace elements such as silver, bismuth, copper, gallium, indium, molybdenum, nickel, uranium, and vanadium in environmental waters. A 5-mL aliquot of sample (pH 5.5) was introduced to the minicolumn for the adsorption/preconcentration of the metal ions, and the collected analytes on the mini-column were eluted with 2 M HNO3, and the eluates was subsequently transported via direct injection to the nebulizer of ICP-AES for quantification. The parameters affecting on the sensitivity, such as sample pH, sample flow rate, eluent concentration, and eluent flow rate, were carefully examined. Alkali and alkaline earth metal ions commonly existing in river water and seawater did not affect the analysis of metals. Under the optimum conditions, the method allowed the determination of metal ions with detection limits of 0.08 ng mL(-1) (Ag), 0.9 ng mL(-1) (Bi), 0.07 ng mL(-1) (Cu), 0.9 ng mL(-1) (Ga), 0.9 ng mL(-1) (In), 0.08 ng mL(-1) (Mo), 0.09 ng mL(-1) (Ni), 0.9 ng mL(-1) (U), and 0.08 ng mL(-1) (V). By using 5 mL of sample solution, the enrichment factor and collection efficiency were 8-12 fold and 96-102%, respectively, whereas the sample throughput was 7 samples/hour. The method was validated by determining metal ions in certified reference material of river water (SLRS-4) and nearshore seawater (CASS-4), and its applicability was further demonstrated to river water and seawater samples.</p
Characterization of crop residues from false banana/Ensete ventricosum/in Ethiopia in view of a full-resource valorization
Research ArticleFalse banana /Ensete ventricosum [Welw.] Cheesman/ is exploited as a food crop in
Ethiopia where it represents an important staple food. The plant is harvested and large
amounts of biomass residues are originated, mainly from the pseudo stem (i.e., fiber bundles
obtained from the leaf sheaths after being scrapped to produce starchy food) and the
inflorescence stalk. These materials were studied in relation to their summative chemical
composition, composition of lignin, lipophilic and polar extracts. Moreover, their structural
characteristics, in view of their valorization, were scrutinized. The analytical studies were
performed with the aid of FTIR, GC/MS, Py-GC/MS and SEM. The fiber bundles are aggregates
of mainly long and slender fibers with low ash, extractives and lignin contents (3.8%.
4.4% and 10.5% respectively) and high holocellulose and α-cellulose contents (87.5% and
59.6% respectively). The hemicelluloses in the fibers are mostly highly acetylated xylans
and the lignin is of the H-type (H:G:S, 1:0.7:0.8). This lignin composition is in line with the
FTIR peaks at 1670 cm-1 and 1250 cm-1.The inflorescence stalk has high ash content
(12.3% in the main stalk and 24.6% in fines) with a major proportion of potassium, high
extractives (25.9%), and low lignin and α-cellulose contents (5.8% and 17.9% respectively).
The stalk includes numerous starch granules in the cellular structure with the predominant
presence of parenchyma. The potential valorization routes for these materials are clearly different.
The fiber bundles could be used as a fiber source for paper pulp production with the
possibility of a prior hemicelluloses removal while the inflorescence stalk has nutritional
value for food and fodder. Furthermore, it can also be used for sugar fermentation productsinfo:eu-repo/semantics/publishedVersio
Mechanical and Water Intake Properties of Banana-Carbon Hybrid Fiber Reinforced Polymer Composites
Pretreatment of Japanese cedar by ionic liquid solutions in combination with acid and metal ion and its application to high solid loading
Preparação e caracterização de materiais híbridos celulose/NbOPO4.nH2O a partir de celulose branqueada de bagaço de cana-de-açúcar
Influence of Nanosilica on Properties of Green Cementitious Composites Filled with Waste Sulfite Pulp Fiber and Aminosilane
Treatments of non-wood plant fibres used as reinforcement in composite materials
This paper presents a summary of the knowledge on fibres and pulps of non wood tropical plants used as reinforcement in cementitious composites accumulated during the recent years by Guadeloupean and Brazilian teams participating in collaborative work. Vegetable fibres represent a good alternative as non-conventional materials for the construction of ecological and sustainable buildings. The use of such renewable resources contributes to the development of sustainable technologies. The main objective of the paper is to emphasize the use of agricultural wastes in the production of cement based composites. The botanical, chemical, physical, morphological and mechanical properties of fibres from various plants are described. The effects of different treatments on physical, chemical and mechanical properties of fibres are presented. The most effective treatments in influencing the mechanical and physical properties are pyrolysis and alkaline ones, according to the type of plant. The final choice will have to consider fibre availability, and treatment costs