Production of bacterial cellulose nanocrystals via enzymatic hydrolysis and evaluation of their coating on alginate particles formed by ionotropic gelation

This study aimed to obtain the bacterial cellulose nanocrystals (CNC) by enzymatic hydrolysis and verify the CNC application as coating material in alginate particles. Therefore, the production of CNC was carried out through two enzymatic hydrolysis methods involving a time period of 48 and 72 h. 0.35 mg of dry mass of cellulose was produced approximately 1.6 × 1011 CNC/mL. The CNC obtained by enzymatic hydrolysis at 72 h (Method II) was applied to cover the alginate particles, obtained by ionotropic gelation. The CNC Zeta potential value was about +15 mV and for alginate particles -26.46 ± 1.48 mV. These results confirmed the application of CNC as coating material for alginate particles. It brings an incremental contribution to the knowledge advancement in the pharmaceutical and food area, allowing the engineering of systems to use a mixed composition of nanobiomaterials to modify the release pattern of drugs, macromolecule, nutrients, stabilizers and target specific drug release.The authors acknowledge financial support from Coordination for Higher Level Graduate Improvements (CAPES/Brazil, Grant Numbers 001), National Council for Scientific and Technological Development (CNPq/Brazil), and the State of São Paulo Research Foundation (FAPESP/Brazil, grant numbers 2019/22,626–5 and 2018/10,508–5).info:eu-repo/semantics/publishedVersio

Libidibia ferrea loaded in bacterial nanocellulose: evaluation of antimicrobial activity and wound care / Libidibia ferrea loaded in bacterial nanocellulose: evaluation of antimicrobial activity and wound care

The effects of Bacterial Nanocellulose (BNC) loaded with Libidibia ferrea (Lf) hydroalcoholic extract were investigated on the healing process of burn in diabetic and non-diabetic animals. In vivo assay was performed with 36 male rats, with streptozotocin-induced diabetes and burns induced by contact. Animals were divided into Nd-BNC (Non-diabetic + Bacterial nanocellulose membranes); Nd-BNC-Lf (Non-diabetic + Bacterial nanocellulose membranes + Libidibia ferrea); D-BNC (Diabetic + Bacterial nanocellulose membranes); D-BNC-Lf (Diabetic + Bacterial nanocellulose membranes + Libidibia ferrea). Wounds were evaluated for 28 days histologically. Lf extract and BNC-Lf extract showed antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli. The severe degree of infection, granulation and inflammation observed after 14 days in diabetic rats (exposed or not to Lf extract), disappeared after 21 days. On the 28th day, there was no histological difference among the groups. BNC-Lf extract demonstrated to have antimicrobial activity, however as an wound dressing, both BNC or BNC-Lf extract were effective in the healing of second-degree burn wounds

Curcumin encapsulation in nanostructures for cancer therapy: a 10-year overview

Journal pre-proofsCurcumin (CUR) is a phenolic compound present in some herbs, including Curcuma longa Linn. (turmeric rhizome), with a high bioactive capacity and characteristic yellow color. It is mainly used as a spice, although it has been found that CUR has interesting pharmaceutical properties, acting as a natural antioxidant, anti-inflammatory, antimicrobial, and antitumoral agent. Nonetheless, CUR is a hydrophobic compound with low water solubility, poor chemical stability, and fast metabolism, limiting its use as a pharmacological compound. Smart drug delivery systems (DDS) have been used to overcome its low bioavailability and improve its stability. The current work overviews the literature from the past 10 years on the encapsulation of CUR in nanostructured systems, such as micelles, liposomes, niosomes, nanoemulsions, hydrogels, and nanocomplexes, emphasizing its use and ability in cancer therapy. The studies highlighted in this review have shown that these nanoformulations achieved higher solubility, improved tumor cytotoxicity, prolonged CUR release, and reduced side effects, among other interesting advantages.This study was funded by the Coordination for Higher Level Graduate Improvements (CAPES/Brazil, finance code 001), National Council for Scientific and Technological Development (CNPq/Brazil, PIBIC process #123483/2020-4), State of São Paulo Research Foundation (FAPESP/Brazil, processes #2017/10789-1, #2018/10799-0, #2018/06475-4, #2018/07707-6, #2019/08549-8, and #2020/03727-2). This work was also supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UIDB/04469/2020 unit and the project AgriFood XXI (NORTE-01-0145-FEDER-000041) funded by the European Regional Development Fund under the scope of Norte2020 - Programa Operacional Regional do Norte. Our Figures were created with BioRenderinfo:eu-repo/semantics/publishedVersio

Polymers Enhancing Bioavailability in Drug Delivery

A drug’s bioavailability, i.e., the extent to and rate at which it enters the systemic circulation, thus accessing the site of action, is largely determined by the properties of the drug [...

Antimicrobial effectiveness of silver nanoparticles co-stabilized by the bioactive copolymer pluronic F68

Abstract Background Silver nanoparticles (AgNps) have attracted much interest in biomedical engineering, since they have excellent antimicrobial properties. Therefore, AgNps have often been considered for incorporation into medical products for skin pathologies to reduce the risk of contamination. This study aims at evaluating the antimicrobial effectiveness of AgNps stabilized by pluronic™ F68 associated with other polymers such as polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP). Methods AgNps antimicrobial activity was evaluated using the minimum inhibitory concentration (MIC) method. The action spectrum was evaluated for different polymers associated with pluronic™ F68 against the gram negative bacteria P. aeuroginosa and E. coli and the gram positive bacteria S. Aureus. Results AgNps stabilized with PVP or PVA and co-stabilized with pluronic™ F68 are effective against E. coli and P. aeruginosa microorganisms, with MIC values as low as 0.78% of the concentration of the original AgNps dispersion. The antimicrobial action against S. aureus is poor, with MIC values not lower than 25%. Conclusions AgNps stabilized by different polymeric systems have shown improved antimicrobial activity against gram-negative microorganisms in comparison to unstabilized AgNps. Co-stabilization with the bioactive copolymer pluronic™ F68 has further enhanced the antimicrobial effectiveness against both microorganisms. A poor effectiveness has been found against the gram-positive S. aureus microorganism. Future assays are being delineated targeting possible therapeutic applications

Sequencing and phylogenetic analyses of talaromyces amestolkiae from amazon: a producer of natural colorants

The population interest in health products is increasing day-by-day. Thus, the demand for natural products to be added in food and pharmaceutical commodity is also rising. Among these additives, colorants, which provides color to products, can be produced by microorganism through bioprocess. Looking for new source of natural colorants, fungi have been employed to this purpose producing novel and safer natural colorants. So, the main goal of this study was to describe a Talaromyces species able to produce natural colorants and investigate nutritional parameters of colorants production using statistical tool. The taxonomy classified the microorganism as Talaromyces amestolkiae. The statistical design evaluated pH and glucose, meat extract and meat peptone concentration as independent variables, and red colorants production as main response. Under the best condition (g/L: glucose 30, meat extract 1, meat peptone 10, and initial pH of 7.0) an increase of 229% in the red colorant production was achieved as compared with the initial media used. The dried fermented broth containing red colorants showed low cytotoxicity against fibroblasts cells (IC50 > 187.5 g/L) and effective antimicrobial activity against S. aureus (MIC of 2.5 g/L). Thus, T. amestolkiae colorants can be attractive to food and pharmaceutical applications as it does not produce toxic compounds and can promote protection against microorganism contaminants351CAPES - Coordenação de Aperfeiçoamento de Pessoal e Nível SuperiorCNPQ - Conselho Nacional de Desenvolvimento Científico e TecnológicoFAPESP – Fundação de Amparo à Pesquisa Do Estado De São Paulosem informação443984/2014-0; 155317/2016-4; 375082014/01580-

Bacterial Cellulose Membranes as Carriers for Nisin: Incorporation, Antimicrobial Activity, Cytotoxicity and Morphology

Based on the previous study, in which nisin and bacterial cellulose were utilized, this new experiment loads nisin into bacterial cellulose (N–BC) and evaluates the morphological characteristics, cytotoxicity, antimicrobial activity and stability of the developed system. The load efficiency of nisin in BC was evaluated by an agar diffusion assay, utilizing Lactobacillus sakei, and total proteins. After having found the ideal time and concentration for the loading process, the system stability was evaluated for 100 days at 4, 25 and 37 °C against Staphylococcus aureus and L. sakei. Thus, in this study, there is a system that proves to be efficient, once BC has enhanced the antimicrobial activity of nisin, acting as a selective barrier for other compounds present in the standard solution and protecting the peptide. After 4 h, with 45% of proteins, this activity was almost 2 log10 higher than that of the initial solution. Once the nisin solution was not pure, it is possible to suggest that the BC may have acted as a filter. This barrier enhanced the nisin activity and, as a consequence of the nisin loading, a stable N–BC system formed. The N–BC could create meaningful material for pharmaceutical and food applications