Relevance evaluation of engineering masters program in Peru

In a context of mass higher education, it is necessary to ensure not only quality but also the relevance of engineering master's programs, namely the appropriateness of the objectives and outcomes to the needs and interests of the program beneficiaries. After a literature review we analyzed the evaluation models of three organizations in Peru: the Board of Evaluation, Accreditation and Certification of the University Education Quality CONEAU, the Institute of Quality and Accreditation of Computing, Engineering and Technology - ICACIT and the Pontificia Universidad Catolica del Peru. The result of this study is a model for relevance evaluation for an engineering master¿s program in Peru

Kinematic Plasticity during Flight in Fruit Bats: Individual Variability in Response to Loading

All bats experience daily and seasonal fluctuation in body mass. An increase in mass requires changes in flight kinematics to produce the extra lift necessary to compensate for increased weight. How bats modify their kinematics to increase lift, however, is not well understood. In this study, we investigated the effect of a 20% increase in mass on flight kinematics for Cynopterus brachyotis, the lesser dog-faced fruit bat. We reconstructed the 3D wing kinematics and how they changed with the additional mass. Bats showed a marked change in wing kinematics in response to loading, but changes varied among individuals. Each bat adjusted a different combination of kinematic parameters to increase lift, indicating that aerodynamic force generation can be modulated in multiple ways. Two main kinematic strategies were distinguished: bats either changed the motion of the wings by primarily increasing wingbeat frequency, or changed the configuration of the wings by increasing wing area and camber. The complex, individual-dependent response to increased loading in our bats points to an underappreciated aspect of locomotor control, in which the inherent complexity of the biomechanical system allows for kinematic plasticity. The kinematic plasticity and functional redundancy observed in bat flight can have evolutionary consequences, such as an increase potential for morphological and kinematic diversification due to weakened locomotor trade-offs

In vivo bone strain and finite element modeling of the mandible of Alligator mississippiensis

Forces experienced during feeding are thought to strongly influence the morphology of the vertebrate mandible; in vivo strain data are the most direct evidence for deformation of the mandible induced by these loading regimes. Although many studies have documented bone strains in the mammalian mandible, no information is available on strain magnitudes, orientations or patterns in the sauropsid lower jaw during feeding. Furthermore, strain gage experiments record the mechanical response of bone at a few locations, not across the entire mandible. In this paper, we present bone strain data recorded at various sites on the lower jaw of Alligator mississippiensis during in vivo feeding experiments. These data are used to understand how changes in loading regime associated with changes in bite location are related to changes in strain regime on the working and balancing sides of the mandible. Our results suggest that the working side mandible is bent dorsoventrally and twisted about its long-axis during biting, and the balancing side experiences primarily dorsoventral bending. Strain orientations are more variable on the working side than on the balancing side with changes in bite point and between experiments; the balancing side exhibits higher strain magnitudes. In the second part of this paper, we use principal strain orientations and magnitudes recorded in vivo to evaluate a finite element model of the alligator mandible. Our comparison demonstrates that strain orientations and mandibular deformation predicted by the model closely match in vivo results; however, absolute strain magnitudes are lower in the finite element model. Key words: biomechanics; crocodilians; feeding; validation

Kinematic Plasticity during Flight in Fruit Bats: Individual Variability in Response to Loading

All bats experience daily and seasonal fluctuation in body mass. An increase in mass requires changes in flight kinematics to produce the extra lift necessary to compensate for increased weight. How bats modify their kinematics to increase lift, however, is not well understood. In this study, we investigated the effect of a 20% increase in mass on flight kinematics for Cynopterus brachyotis, the lesser dog-faced fruit bat. We reconstructed the 3D wing kinematics and how they changed with the additional mass. Bats showed a marked change in wing kinematics in response to loading, but changes varied among individuals. Each bat adjusted a different combination of kinematic parameters to increase lift, indicating that aerodynamic force generation can be modulated in multiple ways. Two main kinematic strategies were distinguished: bats either changed the motion of the wings by primarily increasing wingbeat frequency, or changed the configuration of the wings by increasing wing area and camber. The complex, individual-dependent response to increased loading in our bats points to an underappreciated aspect of locomotor control, in which the inherent complexity of the biomechanical system allows for kinematic plasticity. The kinematic plasticity and functional redundancy observed in bat flight can have evolutionary consequences, such as an increase potential for morphological and kinematic diversification due to weakened locomotor trade-offs.</p

Genetic variability of earthworm populations in soils with different perturbation levels

Density and genetic variability of both soil macro- and meso-fauna are disturbed by productive practices. This study aimed to analyze the genetic diversity and genetic structure of populations of the earthworm Aporrectodea caliginosa caliginosa (Briones, 1996) in two sites of the Argentine Pampa under different levels of disturbance: i) grassland, ii) livestock-raising plot, iii) agricultural-livestock raising plots and iv) agricultural plot (the most disturbed). The genetic diversity of the earthworm population was determined based on the allele number, polymorphism percentage and Similarity Index. Allele number and polymorphism percentage were lower in populations from one of the soils under agricultural-livestock practices, but differed significantly only from the values of the other agricultural-livestock raising plot and the livestock-raising plot. Population structure was low although significant. This study shows that allele number and polymorphism are very useful metrics to provide historical and functional information of soils. However, the genetic differences here recorded probably depend on multiple historical and recent causes. The stability of environmental conditions along with the degree of disturbance must be considered to understand their impact on population genetic structure.Fil: Rionda, Macarena. Universidad Nacional de General Sarmiento; ArgentinaFil: Diaz Porres, Monica. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Universidad Nacional de Luján. Instituto de Ecología y Desarrollo Sustentable; ArgentinaFil: Momo, Fernando Roberto. Universidad Nacional de General Sarmiento; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Universidad Nacional de Luján. Instituto de Ecología y Desarrollo Sustentable; ArgentinaFil: Fernandez Iriarte, Pedro Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Marinas y Costeras. Universidad Nacional de Mar del Plata. Facultad de Ciencias Exactas y Naturales. Instituto de Investigaciones Marinas y Costeras; Argentin

Functional Correlates of the Position of the Axis of Rotation of the Mandible During Chewing in Non-Human Primates

The location of the axis of rotation (AoR) of the mandible was quantified using the helical axis (HA) in eight individuals from three species of nonhuman primates: Papio anubis, Cebus apella, and Macaca mulatta. These data were used to test three hypotheses regarding the functional significance of anteroposterior condylar translation – an AoR located inferior to the temporomandibular joint (TMJ) – during chewing: minimizing impingement of the gonial region on cervical soft tissue structures during jaw opening; avoiding stretching of the inferior alveolar neurovascular bundle (IANB); and increasing jaw-elevator muscle torques. The results reveal that the HA is located near the occlusal plane in Papio and Cebus, but closer to the condyle in Macaca; is located anteroinferior to the TMJ during both opening and closing in Papio, as well as during opening in Macaca and Cebus; and varies in its location during closing in Macaca and Cebus. The impingement hypothesis is not supported by interspecific variation in HA location: species with larger gonial angles like Cebus do not have more inferiorly located HAs than species with more obtuse mandibular angles like Papio. However, intraspecific variation provides some support for the impingement hypothesis. The HA seldom passes near or through the lingula, falsifying the hypothesis that its location is determined by the sphenomandibular ligament, and the magnitudes of strain associated with a HA at the TMJ would not be large enough to cause problematic stretching of the IANB. HA location does affect muscle moment arms about the TMJ, with implications for the torque generation capability of the jaw-elevator muscles. In Cebus, a HA farther away from the TMJ is associated with larger jaw-elevator muscle moment arms about the joint than if it were at the TMJ. The effects of HA location on muscle strain and muscle moment arms are largest at large gapes and smallest at low gapes, suggesting that if HA location is of functional significance for primate feeding system performance, it is more likely to be in relation to large gape feeding behaviors than chewing. Its presence in humans is most parsimoniously interpreted as a primitive retention from nonhuman primate ancestors and explanations for the presence of AP condylar translation in humans need not invoke either the uniqueness of human speech or upright posture

The impact of bone and suture material properties on mandibular function in Alligator mississippiensis: testing theoretical phenotypes with finite element analysis

ABSTRACT: The functional effects of bone and suture stiffness were considered here using finite element models representing three different theoretical phenotypes of an Alligator mississippiensis mandible. The models were loaded using force estimates derived from muscle architecture in dissected specimens, constrained at the 18th and 19th teeth in the upper jaw and 19th tooth of the lower jaw, as well as at the quadrate-articular joint. Stiffness was varied systematically in each theoretical phenotype. The three theoretical phenotypes included: (i) linear elastic isotropic bone of varying stiffness and no sutures; (ii) linear elastic orthotropic bone of varying stiffness with no sutures; and (iii) linear elastic isotropic bone of a constant stiffness with varying suture stiffness. Variation in the isotropic material properties of bone primarily resulted in changes in the magnitude of principal strain. By comparison, variation in the orthotropic material properties of bone and isotropic material properties of sutures resulted in: a greater number of bricks becoming either more compressive or more tensile, changing between being either dominantly compressive or tensile, and having larger changes in the orientation of maximum principal strain. These data indicate that variation in these model properties resulted in changes to the strain regime of the model, highlighting the importance of using biologically verified material properties when modeling vertebrate bones. When bones were compared within each set, the response of each to changing material properties varied. In two of the 12 bones in the mandible, varied material properties within sutures resulted in a decrease in the magnitude of principal strain in bricks adjacent to the bone/suture interface and decreases in stored elastic energy. The varied response of the mandibular bones to changes in suture stiffness highlights the importance of defining the appropriate functional unit when addressing relationships of performance and morphology