764 research outputs found
Influência da percentagem de armadura convencional no comportamento à flexão de vigas reforçadas com sistemas de CFRP
Com o objectivo de avaliar a contribuição dos laminados de fibras de carbono (CFRP) no
comportamento do betĂŁo armado fendilhado foi efectuada uma campanha de ensaios
experimentais em vigas. A influência da relação entre a percentagem de laminados e de
armadura convencional no comportamento das vigas foi investigada. Neste trabalho os
ensaios efectuados sĂŁo descritos e os resultados obtidos sĂŁo analisados
Plagioscion squamosissimus (Sciaenidae) and Parachromis managuensis (Cichlidae): A Threat to Native Fishes of the Doce River in Minas Gerais, Brazil
The middle section of the lake basin of the Doce River in Minas Gerais State, Brazil is plagued by grave environmental problems, including the introduction of non-native fish, which reduces the biodiversity of this region. This study reports the presence of two newly-detected non-native species in the Doce River Basin. Sampling efforts included gill nets with mesh size of 3 to 12 mm (measured diagonally) and trawling nets, both of which were used in independent field campaigns in 2002 and 2011. The two new invasive Perciform fishes, Plagioscion squamosissimus (Heckel 1840) and Parachromis managuensis (GĂĽnther 1867) were collected in Caratinga and Rio Doce municipalities. These records and other reports on non-native fishes suggest favorable environmental conditions for the establishment of invasive species in this drainage. These invasive species have behavior and diet observed in other wide distribution exotic fish of Rio Doce Basin representing a threat to the 77 native fishes of this region, 37 of which are endangered
Pullout behaviour of hooked-end steel fibres in self-compacting concrete
Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/18002/2004
Analytical model for bond-slip of hooked-end steel fibres
In this work an analytical model for obtaining the local bond stress-slip relationship of hooked-end steel fibres is presented. The mathematical representation of the pullout problem is described and the numerical algorithm of the model is detailed. Furthermore, the performance of the developed model is assessed using results obtained in fibre pullout experimental tests
Modelação analĂtica da influĂŞncia da idade de betĂŁo auto-compactável reforçado com fibras de aço no seu comportamento Ă compressĂŁo
Neste artigo sĂŁo apresentados os resultados de ensaios Ă compressĂŁo uniaxial em provetes de betĂŁo auto-compactável reforçado com fibras de aço, BACRFA. A influĂŞncia da idade nas propriedades mecânicas do BACRFA Ă© aferida. Adicionalmente, propõem-se relações tensĂŁo-extensĂŁo para modelar o comportamento Ă compressĂŁo do BACRFA, e recomendam-se expressões analĂticas para determinar as principais propriedades mecânicas deste compĂłsito.O estudo reportado neste artigo Ă© parte integrante do programa de investigação: “Prefabricated sandwich steel fibre reinforced panels” cofinanciados pela FEDER e MCT, e promovido pela ADI. Este projecto envolve as empresas PREGAIA e CIVITEST, e a Universidade do Minho. Os autores agradecem os materiais gentilmente cedidos pela Bekaert (fibras), SECIL (cimento), Degussa (superplastificante) e Comital (filler calcário). O primeiro autor deseja, igualmente, agradecer Ă FCT pela bolsa concedida, SFRH/BD/18002/2004
Influência da geometria e propriedades mecânicas de fibras de aço no desempenho ao arrancamento
A eficiência de uma fibra como meio de transferência de tensões é frequentemente determinada por
intermédio de ensaios de arrancamento, sendo o deslizamento da fibra monitorizado em função da
força de arrancamento aplicada na fibra. Nas últimas três décadas, vários fabricantes introduziram no
mercado fibras com geometria melhorada, reivindicando melhores desempenhos comparativamente
com as fibras lisas. Hoje em dia as fibras adicionadas a uma matriz cimentĂcia possuem, em geral,
uma ancoragem mecânica. Recorrentemente, as fibras são produzidas por deformação mecânica das
suas extremidades em forma de ganchos, cones, remos, etc. NĂŁo obstante, devido a diferentes
materiais e processos de fabrico, as propriedades mecânicas das fibras como, a resistência à tracção, a
eficiência da ancoragem mecânica diferem entre os vários fabricantes, mesmo considerando o mesmo
tipo de fibra. Estas diferenças têm influência no comportamento ao arrancamento de uma fibra e,
consequentemente, no comportamento mecânico de um material compósito reforçado com fibras.
No presente trabalho é realizada uma análise comparativa de três tipos de fibras de aço com
ancoragens em forma de gancho produzidas por três fabricantes distintos. A influência da variação das
dimensões da geometria das fibras e das propriedades mecânicas destas no comportamento ao
arrancamento foi avaliada. Ensaios à tracção e de arrancamento com fibras dos distintos fabricantes
sĂŁo apresentados, sendo analisados os resultados obtidos
Compression behaviour of steel fibre reinforced self-compacting concrete : age influence and modeling
Technical report 06-DEC/E-0
Bond-slip mechanisms of hooked-end steel fibers in self-compacting concrete
The experimental results of hooked-end steel fibers pullout tests on a self-compacting
concrete medium are presented and discussed in this work. The influence of fiber embedment
length on the fiber pullout behavior is studied. The role of the end hook of the fiber on the overall
pullout behavior is also investigated by carrying out tests with fibers without its end hook, in order
to separate the contribution of the frictional bond component from those derived from the
mechanisms provided by the end hook of the fiber. Finally, the experimental bond-slip relationships
are modeled by an analytical model
Numerical simulation of three-point bending tests : two distinct approaches
In this work are presented and discussed the numerical simulations carried out for indirect tensile tests of steel fibre reinforced self-compacting concrete specimens. The post-cracking behaviour was modelled with two distinct approaches. Within the scope of the first one, the s-w relationships were obtained by an inverse analysis procedure up to distinct ultimate crack widths. The other approach consisted on modelling the behaviour of the composite based upon the micro-mechanical behaviour of the fibres. For this purpose the composite was modelled as two-phase material under the FEM basis, with an unreinforced concrete matrix phase (paste + aggregates) and a fibre phase. The fibre phase comprises information about fibre density and orientation depending on where and how the material is applied
- …