Degraded reality: Using VR/AR to simulate visual impairments

The effects of eye disease cannot be depicted accurately using traditional media. Consequently, public understanding of eye disease is often poor. We present a VR/AR system for simulating common visual impairments, including disability glare, spatial distortions (Metamorphopsia), the selective blurring and filling-in of information across the visual field, and color vision deficits. Unlike most existing simulators, the simulations are informed by patients' self-reported symptoms, can be quantitatively manipulated to provide custom disease profiles, and support gaze-contingent presentation (i.e., when using a VR/AR headset that contains eye-tracking technology, such as the Fove0). Such a simulator could be used as a teaching/empathy aid, or as a tool for evaluating the accessibility of new products and environments

The design and development of a release mechanism for space shuttle life-science experiments

The design, development, and testing of a release mechanism for use in two life science experiments on the Spacelab 1, 4, and D1 missions is described. The mechanism is a self latching ball lock device actuated by a linear solenoid. An unusual feature is the tapering of the ball lock plunger to give it a near constant breakout force for release under a wide range of loads. The selection of the design, based on the design requirements, is discussed. A number of problems occurred during development and test, including problems caused by human factors that became apparent after initial delivery for crewtraining sessions. These problems and their solutions are described to assist in the design and testing of similar mechanisms

The effect of timing noise on targeted and narrow-band coherent searches for continuous gravitational waves from pulsars

Most searches for continuous gravitational-waves from pulsars use Taylor expansions in the phase to model the spin-down of neutron stars. Studies of pulsars demonstrate that their electromagnetic (EM) emissions suffer from \emph{timing noise}, small deviations in the phase from Taylor expansion models. How the mechanism producing EM emission is related to any continuous gravitational-wave (CW) emission is unknown; if they either interact or are locked in phase then the CW will also experience timing noise. Any disparity between the signal and the search template used in matched filtering methods will result in a loss of signal-to-noise ratio (SNR), referred to as `mismatch'. In this work we assume the CW suffers a similar level of timing noise to its EM counterpart. We inject and recover fake CW signals, which include timing noise generated from observational data on the Crab pulsar. Measuring the mismatch over durations of order $\sim 10$ months, the effect is for the most part found to be small. This suggests recent so-called `narrow-band' searches which placed upper limits on the signals from the Crab and Vela pulsars will not be significantly affected. At a fixed observation time, we find the mismatch depends upon the observation epoch. Considering the averaged mismatch as a function of observation time, we find that it increases as a power law with time, and so may become relevant in long baseline searches.Comment: 9 pages, 5 figure

Comparing models of the periodic variations in spin-down and beam-width for PSR B1828-11

We build a framework using tools from Bayesian data analysis to evaluate models explaining the periodic variations in spin-down and beam-width of PSR B1828-11. The available data consists of the time averaged spin-down rate, which displays a distinctive double-peaked modulation, and measurements of the beam-width. Two concepts exist in the literature that are capable of explaining these variations; we formulate predictive models from these and quantitatively compare them. The first concept is phenomenological and stipulates that the magnetosphere undergoes periodic switching between two meta-stable states as first suggested by Lyne et al. The second concept, precession, was first considered as a candidate for the modulation of B1828-11 by Stairs et al.. We quantitatively compare models built from these concepts using a Bayesian odds-ratio. Because the phenomenological switching model itself was informed by this data in the first place, it is difficult to specify appropriate parameter-space priors that can be trusted for an unbiased model comparison. Therefore we first perform a parameter estimation using the spin-down data, and then use the resulting posterior distributions as priors for model comparison on the beam-width data. We find that a precession model with a simple circular Gaussian beam geometry fails to appropriately describe the data, while allowing for a more general beam geometry provides a good fit to the data. The resulting odds between the precession model (with a general beam geometry) and the switching model are estimated as $10^{2.7 \pm 0.5}$ in favour of the precession model.Comment: 20 pages, 15 figures; removed incorrect factor of (2\pi) from equation (15), allowed for arbitrary braking index, and revised prior ranges; overall conclusions unchange

Laser velocimeter applications to high-lift research

The application of the Lockheed-Georgia 2-D laser velocimeter (LV) burst-counter system to the flow field around a 2- and 3-element high-lift airfoil is discussed. The characteristic behavior of the confluent boundary layer (that is, the boundary layer existing downstream of a slot as it approaches and undergoes separation is evaluated. In this application, the LV represents all ideal instruments for nonintrusively probing into the narrow slots and cove areas characterizing mechanical high-lift systems. The work is being performed in the Lockheed-Georgia 10 x 30-inch low-speed test facility using a 9-inch (basic) chord section of the general aviation GAW-1 airfoil. The LV system employs a 4-W argon laser and operates in an off-axis, backscatter mode with a focus length of about 30 inches. Smoke is used as the seeding medium and is injected downstream of the model such that particle uniformity and size are constant upon completion of the tunnel circuit into the test area. The LV system is fully automated by utilizing a MAC-16 minicomputer for positioning, data acquisition, and preliminary data reduction

The Dynamics of US Labor Force Attachment

No abstract.

The economics of garbage collection

This paper argues that economic theory can improve our understanding of memory management. We introduce the allocation curve, as an analogue of the demand curve from microeconomics. An allocation curve for a program characterises how the amount of garbage collection activity required during its execution varies in relation to the heap size associated with that program. The standard treatment of microeconomic demand curves (shifts and elasticity) can be applied directly and intuitively to our new allocation curves. As an application of this new theory, we show how allocation elasticity can be used to control the heap growth rate for variable sized heaps in Jikes RVM

Sixty-GHz integrated RF head Final report

Integrated 60.8 GHz RF receiver and low noise IF preamplifier developmen