58,133 research outputs found
Preliminary design of a geologic sample acquisition and transport device Final report, May - Oct. 1965
Design concept for breadboard model of geological sample and transport device for Surveyor projec
Macroscopic and microscopic studies of electrical properties of very thin silicon dioxide subject to electrical stress
The electrical characteristics of various size tunnel switch diode devices, composed of Al/SiO2/n-Si/p+-Si layers, which operate with a range of parameters (such as current densities in excess of 104 A/cm2) that stress the oxide layer far beyond the levels used in typical thin oxide metal-oxide semiconductor research have been examined. It is found that the first time a large current and electric field are applied to the device, a "forming" process enhances transport through the oxide in the vicinity of the edges of the gate electrode, but the oxide still retains its integrity as a tunnel barrier. The device operation is relatively stable to stresses of greater than 107 C/cm2 areally averaged, time-integrated charge injection. Duplication and characterization of these modified oxide tunneling properties was attempted using scanning tunneling microscopy (STM) to stress and probe the oxide. Electrical stressing with the STM tip creates regions of reduced conductivity, possibly resulting from trapped charge in the oxide. Lateral variations in the conductivity of the unstressed oxide over regions roughly 20–50 nm across were also found
Electrical impedance imaging in two-phase, gas-liquid flows: 1. Initial investigation
The determination of interfacial area density in two-phase, gas-liquid flows is one of the major elements impeding significant development of predictive tools based on the two-fluid model. Currently, these models require coupling of liquid and vapor at interfaces using constitutive equations which do not exist in any but the most rudimentary form. Work described herein represents the first step towards the development of Electrical Impedance Computed Tomography (EICT) for nonintrusive determination of interfacial structure and evolution in such flows
Epitaxial silicon grown on CeO2/Si(111) structure by molecular beam epitaxy
Using electron beam evaporation, a Si/CeO2/Si(111) structure has been grown in a molecular beam epitaxy machine. In situ low energy electron diffraction, cross sectional transmission electron microscopy, selected area diffraction, and atomic force microscopy have been used to structurally characterize the overlying silicon layer and show it to be single crystalline and epitaxially oriented. Rutherford backscattering and energy dispersive x-ray analysis have been used to confirm the presence of a continuous 23 Å CeO2 layer at the interface. Rutherford backscattering and x-ray photoemission spectroscopy show an additional presence of cerium both at the exposed silicon surface and incorporated in low levels (~ 1%) within the silicon film, suggesting a growth mechanism with cerium riding atop the silicon growth front leaving behind small amounts of cerium incorporated in the growing silicon crystal
Longitudinal Strain Pulse Propagation in Wide Rectangular Bars: Part 2—Experimental Observations and Comparisons With Theory
The plane-stress theory presented in Part 1 is shown to predict qualitatively the warping of plane sections observed in transient fringe patterns obtained using birefringent coatings and in dynamic photoelastic pictures obtained in other investigations. Measurements using conventional techniques are described in which wide rectangular bars were subjected to a longitudinal step-function pressure loading produced by a shock tube. Comparisons show that the gross features of the experimental records for the head of the pulse are qualitatively predicted by the theory. Both theory and experiment show that short-wavelength, second-mode disturbances arrive very early. Experimentally it is observed that these disturbances are accomplished by thickness-mode activity which cannot be accounted for by the plane-stress theory
Control theory for principled heap sizing
We propose a new, principled approach to adaptive heap sizing based on control theory. We review current state-of-the-art heap sizing mechanisms, as deployed in Jikes RVM and HotSpot. We then formulate heap sizing as a control problem, apply and tune a standard controller algorithm, and evaluate its performance on a set of well-known benchmarks. We find our controller adapts the heap size more responsively than existing mechanisms. This responsiveness allows tighter virtual machine memory footprints while preserving target application throughput, which is ideal for both embedded and utility computing domains. In short, we argue that formal, systematic approaches to memory management should be replacing ad-hoc heuristics as the discipline matures. Control-theoretic heap sizing is one such systematic approach
The Effects of Dissolved Methane upon Liquid Argon Scintillation Light
In this paper we report on measurements of the effects of dissolved methane
upon argon scintillation light. We monitor the light yield from an alpha source
held 20 cm from a cryogenic photomultiplier tube (PMT) assembly as methane is
injected into a high-purity liquid argon volume. We observe significant
suppression of the scintillation light yield by dissolved methane at the 10
part per billion (ppb) level. By examining the late scintillation light time
constant, we determine that this loss is caused by an absorption process and
also see some evidence of methane-induced scintillation quenching at higher
concentrations (50-100 ppb). Using a second PMT assembly we look for visible
re-emission features from the dissolved methane which have been reported in
gas-phase argon methane mixtures, and we find no evidence of visible
re-emission from liquid-phase argon methane mixtures at concentrations between
10 ppb and 0.1%.Comment: 18 pages, 11 figures Updated to match published versio
Magnetic impurities coupled to quantum antiferromagnets in one dimension
Magnetic impurities coupled antiferromagnetically to a one-dimensional
Heisenberg model are studied by numerical diagonalization of chains of finite
clusters. By calculating the binding energy and the correlation function, it is
shown that a local singlet develops around each impurity. This holds true for
systems with a single impurity, with two impurities, and for impurities forming
a lattice. The local character of the singlet is found to be little affected by
the presence of other impurity spins. A small effective interaction is found
between a pair of impurity spins, which oscillates depending on impurity
distances. For impurity lattices, the energy spectrum shows a gap which is
found to be much smaller than the binding energy per impurity if the coupling
constants are small. For larger coupling constants, it increases to the same
order of magnitude as the binding energy, indicating that a local singlet is
broken to create excited states. Impurity lattices with ferromagnetic couplings
are also studied and their connection to the Haldane problem is discussed.Comment: 25 pages, plain TeX, 17 figures available on request, to be publised
in Phys. Rev.
Self-compassion and compassion towards one’s partner mediate the negative association between insecure attachment and relationship quality.
The quality of intimate relationships has been found to be a strong negative predictor for individuals’ mental and physical health problems. A significant predictor of relationship quality is adult attachment insecurity, but the mechanism by which attachment insecurity affects relationship quality needs further investigation. This study investigated whether self-compassion and compassion for one’s partner mediated this association. Three-hundred-forty-two individuals participated in an online survey assessing attachment anxiety and avoidance, compassionate and uncompassionate attitude towards self and one’s partner, as well as relationship quality and relationship satisfaction. The results showed that low self-compassionate attitude mediated the association between attachment anxiety and poor relationship quality. Further, low compassionate and high uncompassionate attitude towards one’s partner mediated the association between attachment avoidance and poor relationship quality. No mediating effect was found for relationship satisfaction. Implications for interventions are discussed
- …