Recovery at Morvin: SERPENT final report

Recovery from disturbance is poorly understood in deep water, but the extent of anthropogenic impacts is becoming increasingly well documented. We used Remotely Operated Vehicles (ROV) to visually assess the change in benthic habitat after exploratory hydrocarbon drilling disturbance around the Morvin well located at 380m depth in the Norwegian Sea.An ROV, launched directly from the rig drilling the well in 2006 was used to carry out video transects around the well before drilling and immediately after. On a return to the site three years after disturbance a larger survey was conducted with a ship-launched ROV in 2009. Transects were repeated at the disturbed area and random background transects were taken. Visible drill cuttings were mapped for each survey, and positions and counts of epibenthic invertebrate megafauna were determined, revealing a fauna dominated by Cnidaria (45% of total observations) and Porifera (33%).Immediately after disturbance a visible cuttings pile extended to over 100m from the well and megafaunal density was significantly reduced (0.07 individuals m-2) in comparison to pre-drill data (0.23 ind. m-2). Three years later the visible extent of the cuttings pile had reduced in size, reaching 60m from the well and considerably less in some headings. In comparison to background transects (0.21 ind. m-2), megafaunal density was significantly reduced on the remaining cuttings (0.04m-2), but beyond the visible disturbance there was no significant difference (0.15m-2). The investigation at this site shows a return to background densities of megafaunal organisms over a large extent of the area previously disturbed. However a central area, where the initial cuttings pile was deepest, demonstrated reduced sessile megafaunal density which persisted three years after disturbance. Elevated Barium concentration and reduced sediment grain size suggests persistence of disturbance beyond the remaining visibly impacted area which may result in changes to the infaunal communities undetectable by ROV video survey

Is all hypoglycaemia treated as equal? An observational study of how the type of diabetes and treatment prescribed prior to admission influences quality of treatment of inpatient hypoglycaemia

Aims: Inpatient hypoglycaemia is common and associated with adverse outcomes. There is often increased vigilance of hypoglycaemia in inpatients with type 1 diabetes (T1DM) compared to type 2 diabetes (T2DM). We aimed to investigate this apparent discrepancy, utilising the time to repeat (TTR) capillary blood glucose (CBG) measurement as a surrogate for engagement with guidelines stating that CBG should be rechecked following intervention within 15 min of an initial CBG of <4 mmol/L. Methods: This is an observational study of inpatient CBG data from 8 hospitals over a 7-year period. A national diabetes registry allowed identification of individual’s diagnosis and diabetes therapy. For each initial (index) CBG, the TTR for individuals with T2DM—on insulin or sulphonylurea—was compared with the TTR for individuals with T1DM, using a t test for significance performed on log(TTR). The median TTR was plotted for each group per index CBG. Results: In total, 1480,335 CBG measurements were obtained. A total of 26,664 were <4 mmol/L. The TTR in T2DM individuals on sulphonylurea was significantly greater than in T1DM individuals where index CBG was ≥2.3 mmol/L (except index CBG 2.6 mmol/L). For T2DM patients receiving insulin significance exists for index CBGs of ≥3.2 mmol/L. Conclusions: This analysis suggests that quality of care of hypoglycaemia varies according to diagnosis and medication. The group with the highest TTR (T2DM sulphonylurea treated) are possibly the clinical group in whom hypoglycaemia is most concerning. These data therefore suggest a need for education and raising awareness within the inpatient nursing staff

Schemes of implementation in NMR of quantum processors and Deutsch-Jozsa algorithm by using virtual spin representation

Schemes of experimental realization of the main two qubit processors for quantum computers and Deutsch-Jozsa algorithm are derived in virtual spin representation. The results are applicable for every four quantum states allowing the required properties for quantum processor implementation if for qubit encoding virtual spin representation is used. Four dimensional Hilbert space of nuclear spin 3/2 is considered in details for this aimComment: 15 pages, 3 figure

Reduction in defect content of ODS alloys

The work detailed within this report is a continuation of earlier work that was carried out under contract number IDX-SY382V. The earlier work comprised a literature review of the sources and types of defects found principally in Fe-based ODS alloys together with a series of experiments designed to identify defects in ODS Fe{sub 3}Al material and recommend methods of defect reduction. Defects found in the Mechanically Alloyed (MA) ODS Fe{sub 3}Al included regions of incomplete MA, porosity, intrusions and fine-grained stringers. Some defects tended to be found in association with one another e.g. intrusions and fine-grained stringers. Preliminary powder separation experiments were also performed. The scope and objectives of the present work were laid out in the technical proposal ``Reduction in Defect Content in ODS Alloys--II'' which formed the basis of amendment 3 of the current contract. The current studies were devised in the context of the preceding work with a view to extending and concluding certain experiments while exploring new avenues of investigation of defect control and reduction where appropriate. All work proposed was within the context of achieving an ODS Fe{sub 3}Al alloy of improved overall quality and potential creep performance (particularly) in the consolidated, release condition. The interim outturn of the experimental work performed is also reported

Electrical activity of carbon-hydrogen centers in Si

The electrical activity of Cs-H defects in Si has been investigated in a combined modeling and experimental study. High-resolution Laplace capacitance spectroscopy with the uniaxial stress technique has been used to measure the stress-energy tensor and the results are compared with theoretical modeling. At low temperatures, implanted H is trapped as a negative-U center with a donor level in the upper half of the gap. However, at higher temperatures, H migrates closer to the carbon impurity and the donor level falls, crossing the gap. At the same time, an acceptor level is introduced into the upper gap making the defect a positive-U center

Deriving the ideal ore texture for microwave treatment of metalliferous ores

High power density microwave treatments on metalliferous ores have historically been shown to reduce ore competency prior to beneficiation at economically feasible energy inputs. However, the relationship between mineralogical textural features and the extent of the microwave-induced fracturing had previously been limited to qualitative descriptions or simplistic two-phase numerical models, which could not account for the complex mineral assemblages in real ores. In this paper, mineralogy, grain size, dissemination, textural consistency and mineral associations were determined for 13 commercially exploited nickel, copper and lead-zinc ores using a Mineral Liberation Analyser (MLA). The ores were subjected to high power density microwave treatments at up to 25kW in a single mode cavity with microwave energy inputs of approximately 0.5-10kWh/t, and the subsequent reductions in ore competency were measured by the Point Load Test. The ores that demonstrated the greatest reductions in strength typically contained between approximately 2%wt to 20%wt of highly microwave-absorbing minerals, with a native grain size d50 greater than approximately 500µm, constrained by hard matrix minerals such as quartz and feldspar. Texturally consistent ores with a high proportion of amenable textures also demonstrated the highest average reductions in strength. These findings support the qualitative descriptions and numerical modelling results available in the literature and provide a baseline for selecting likely candidate ores for microwave treatments in the future

Increasing the grind size for effective liberation and flotation of a porphyry copper ore by microwave treatment

In this paper, mineralogy, grain size, dissemination, textural consistency and mineral associations were determined for a commercially exploited porphyry copper ore using a Mineral Liberation Analyser (MLA). The ore was subjected to high power density microwave treatments in a single mode cavity at 15 kW and approximately 2 kW h/t. The untreated and microwave-treated samples were subsequently milled to two grind sizes near the nominal plant grind size and a size-by-liberation analysis performed. The analysis revealed that equivalent liberation could be obtained at a grind size approximately 50–60 μm coarser than the nominal plant grind due to the microwave treatment. Flotation testing indicated that an increase in copper recovery of approximately 1% could be achieved, or that a grind size increase of approximately 30 μm may potentially yield equivalent copper recovery due to the microwave-enhanced liberation observed. However, statistical analyses demonstrated that it is difficult to attain confidence in recovery increases of approximately 1% even when conducting batch flotation tests in triplicate. The ore under investigation had previously been shown to produce only modest average reductions in strength (∼8%) under similar microwave treatment conditions due to a prevalence of many unfavourable textures. However, the preferential association of copper minerals with a hard matrix mineral (quartz) and a hard microwave-absorbent mineral (pyrite) resulted in a significant change in liberation behaviour

Tree species identity influences the vertical distribution of labile and recalcitrant carbon in a temperate deciduous forest soil

In terrestrial environments, soil organic matter (SOM) is the largest organic carbon (C) pool. The quantity and quality of organic carbon in soils can be affected by vegetation through influencing the inputs and outputs of SOM. We examined how storage and quality of C in SOM were affected by vegetation under grass cover or single and a polyculture plot of Betula pendula, Alnus glutinosa and Fagus sylvatica. An acid hydrolysis approach was used to quantify three SOM fractions differing in biodegradability. Tree species identity and stand composition had no significant effect on the total amount of C stored in different SOM fractions to a depth of one meter. However, when examining individual SOM fractions in the upper layers of the soil profile, significantly more C was stored in the putatively more labile fractions 1 and 2 under F. sylvatica and A. glutinosa, respectively. In deeper soil layers, the highest storage of recalcitrant organic C was found under the tree polyculture. The vertical distribution of these three soil organic C pools was compared to C inputs via decomposed leaf litter. Our data indicated that in the tree species polyculture, combining litter inputs of multiple species can have a positive impact on the accumulation of acid resistant recalcitrant C in deep soil layers in 4 years. This C fraction has the greatest potential for long-term sequestratio

Three-spined sticklebacks show dimension-specific preferences for shelter

Funding Information: We are grateful to the Association for the Study of Animal Behaviour (ASAB) for funding this work through an ASAB research grant to N.A.R.J. Thank you also to the University of St Andrews Research internship Scheme (StARIS) which provided funding for G.G.Shelter is an important resource, serving as protection from rivals, predators and environmental stressors. The physical dimensions of a potential shelter are an important factor that can affect decisions about potential shelter options. Animals must select a shelter that they can fit into and use as a refuge, but beyond that, do they show fine-scale preferences based on shelter dimensions? This question has been actively studied for species whose shelter use is closely connected to their life cycles, such as obligate shell dwellers and nest-inhabiting species. However, preferences and decision making for temporary shelters has received less attention. We tested whether three-spined sticklebacks, Gasterosteus aculeatus, a common laboratory model, exhibit preferences in shelter use (actively entering and spending time within a shelter) between shelters with different dimensions. We used PVC tubes of different dimensions as shelters and conducted a simultaneous choice assay where individual fish were presented with each of three tubes available for use as shelter. The fish showed a clear preference, using larger diameter shelters more frequently than either of the other two options. There was no difference in the number of nonsheltering visits fish made or time to enter a shelter across tube sizes, which suggests an active selection by the fish rather than passive bias. There was no difference in duration of time spent within a shelter, suggesting that despite these preferences, actual benefit derived by the fish may be decoupled from the shelter dimensions. Our results offer opportunities for future research that addresses longer term questions in both behavioural ecology and welfare. What drives the preference for larger diameter tubes, and are there are long-term benefits to shelter with preferred dimensions? Certainly, our results suggest that housing sticklebacks with larger diameter shelters may be a simple and convenient means to improve welfare.Publisher PDFPeer reviewe

Physical enrichment research for captive fish : time to focus on the DETAILS

Funding: Fisheries Society of the British Isles (GB) (Grant Number(s): PhD Studentship).Growing research effort has shown that physical enrichment (PE) can improve fish welfare and research validity. However, the inclusion of PE does not always result in positive effects and conflicting findings have highlighted the many nuances involved. Effects are known to depend on species and life stage tested, but effects may also vary with differences in the specific items used as enrichment between and within studies. Reporting fine-scale characteristics of items used as enrichment in studies may help to reveal these factors. We conducted a survey of PE-focused studies published in the last 5 years to examine the current state of methodological reporting. The survey results suggest that some aspects of enrichment are not adequately detailed. For example, the amount and dimensions of objects used as enrichment were frequently omitted. Similarly, the ecological relevance, or other justification, for enrichment items was frequently not made explicit. Focusing on ecologically relevant aspects of PE and increasing the level of detail reported in studies may benefit future work and we propose a framework with the acronym DETAILS ( D imensions, E cological rationale, T iming of enrichment, A mount, I nputs, L ighting and S ocial environment). We outline the potential importance of each of the elements of this framework with the hope it may aid in the level of reporting and standardization across studies, ultimately aiding the search for more beneficial types of PE and the development of our understanding and ability to improve the welfare of captive fish and promote more biologically relevant behaviour.Publisher PDFPeer reviewe