33,146 research outputs found
Energy efficient engine preliminary design and integration studies
The characteristics and systems benefits of an energy efficient engine (E3) suitable for use on advanced subsonic transport aircraft were determined. Relative to a current CF6-50C engine, the following benefits were estimated: 14.4% reduction in installed cruise specific fuel consumption, and a reduction in direct operating cost of more than 5%. The advanced technology E3 system would also permit: compliance with FAR 36 (1977) noise limits, and compliance with 1981 EPA emission standards
Polarization Enhancement in Short Period Superlattices via Interfacial Intermixing
The effect of intermixing at the interface of short period
PbTiO/SrTiO superlattices is studied using first-principles density
functional theory. The results indicate that interfacial intermixing
significantly enhances the polarization within the superlattice. This
enhancement is directly related to the off-centering of Pb and Sr cations and
can be explained through a discussion of interacting dipoles. This picture
should be general for a wide range of multicomponent superlattices and may have
important consequences for the design of ferroelectric devices.Comment: 4 pages, 6 figure
Preparation of monotectic alloys having a controlled microstructure by directional solidification under dopant-induced interface breakdown
Monotectic alloys having aligned spherical particles of rods of the minor component dispersed in a matrix of the major component are prepared by forming a melt containing predetermined amounts of the major and minor components of a chosen monotectic system, providing in the melt a dopant capable of breaking down the liquid solid interface for the chosen alloy, and directionally solidfying the melt at a selected temperature gradient and a selected rate of movement of the liquid-solid interface (growth rate). Shaping of the minor component into spheres or rods and the spacing between them are controlled by the amount of dopant and the temperature gradient and growth rate values. Specific alloy systems include Al Bi, Al Pb and Zn Bi, using a transition element such as iron
Potts Models with (17) Invisible States on Thin Graphs
The order of a phase transition is usually determined by the nature of the
symmetry breaking at the phase transition point and the dimension of the model
under consideration. For instance, q-state Potts models in two dimensions
display a second order, continuous transition for q = 2,3,4 and first order for
higher q.
Tamura et al recently introduced Potts models with "invisible" states which
contribute to the entropy but not the internal energy and noted that adding
such invisible states could transmute continuous transitions into first order
transitions. This was observed both in a Bragg-Williams type mean-field
calculation and 2D Monte-Carlo simulations. It was suggested that the invisible
state mechanism for transmuting the order of a transition might play a role
where transition orders inconsistent with the usual scheme had been observed.
In this paper we note that an alternative mean-field approach employing
3-regular random ("thin") graphs also displays this change in the order of the
transition as the number of invisible states is varied, although the number of
states required to effect the transmutation, 17 invisible states when there are
2 visible states, is much higher than in the Bragg-Williams case. The
calculation proceeds by using the equivalence of the Potts model with 2 visible
and r invisible states to the Blume-Emery-Griffiths (BEG) model, so a
by-product is the solution of the BEG model on thin random graphs.Comment: (2) Minor typos corrected, references update
Active clearance control system for a turbomachine
An axial compressor is provided with a cooling air manifold surrounding a portion of the shroud, and means for bleeding air from the compressor to the manifold for selectively flowing it in a modulating manner axially along the outer side of the stator/shroud to cool and shrink it during steady state operating conditions so as to obtain minimum shroud/rotor clearance conditions. Provision is also made to selectively divert the flow of cooling air from the manifold during transient periods of operation so as to alter the thermal growth or shrink rate of the stator/shroud and result in adequate clearance with the compressor rotor
Polydimethylsiloxane based microfluidic diode
In this paper, we present a novel elastomer-based microfluidic device for rectifying flow. The device is analogous to an electronic diode in function since it allows flow in one direction and stops flow in the opposing direction. The device is planar, in-line and can be replica molded via standard soft lithography techniques. The fabrication process is outlined in detail and follows a simple procedure that requires only photolithography and one replica molding step. Several geometries of devices are presented along with their flow versus pressure characteristics. A brief discussion of the device behavior is presented along with possible uses for the device
Fixed boundary conditions analysis of the 3d Gonihedric Ising model with
The Gonihedric Ising model is a particular case of the class of models
defined by Savvidy and Wegner intended as discrete versions of string theories
on cubic lattices. In this paper we perform a high statistics analysis of the
phase transition exhibited by the 3d Gonihedric Ising model with in the
light of a set of recently stated scaling laws applicable to first order phase
transitions with fixed boundary conditions. Even though qualitative evidence
was presented in a previous paper to support the existence of a first order
phase transition at , only now are we capable of pinpointing the
transition inverse temperature at and of checking the
scaling of standard observables.Comment: 14 pages, 5 tables, 2 figures, uses elsart.cls packag
On the detectability of extragalactic fast radio transients
Recent discoveries of highly dispersed millisecond radio bursts by Thornton
et al. in a survey with the Parkes radio telescope at 1.4 GHz point towards an
emerging population of sources at cosmological distances whose origin is
currently unclear. Here we demonstrate that the scattering effects at lower
radio frequencies are less than previously thought, and that the bursts could
be detectable at redshifts out to about in surveys below 1 GHz. Using a
source model in which the bursts are standard candles with bolometric
luminosities ergs/s uniformly distributed per unit
comoving volume, we derive an expression for the observed peak flux density as
a function of redshift and use this, together with the rate estimates found by
Thornton et al. to find an empirical relationship between event rate and
redshift probed by a given survey. The non-detection of any such events in
Arecibo 1.4 GHz survey data by Deneva et al., and the Allen Telescope Array
survey by Simeon et al. is consistent with our model. Ongoing surveys in the
1--2 GHz band should result in further discoveries. At lower frequencies,
assuming a typical radio spectral index , the predicted peak flux
densities are 10s of Jy. As a result, surveys of such a population with current
facilities would not necessarily be sensitivity limited and could be carried
out with small arrays to maximize the sky coverage. We predict that sources may
already be present in 350-MHz surveys with the Green Bank Telescope. Surveys at
150 MHz with 30 deg fields of view could detect one source per hour above
30 Jy.Comment: 5 pages, 2 figures, Accepted for publication in MNRAS on 2013 July
25. Received 2013 July 24; in original form 2013 May 3
- …