Investigation of surface water behavior during glaze ice accretion

A series of experimental investigations that focused on isolating the primary factors that control the behavior of unfrozen surface water during glaze ice accretion were conducted. Detailed microvideo observations were made of glaze ice accretions on 2.54 cm diam cylinders in a closed-loop refrigerated wind tunnel. Distinct zones of surface water behavior were observed; a smooth wet zone in the stagnation region with a uniform water film, a rough zone where surface tension effects caused coalescence of surface water into stationary beads, and a zone where surface water ran back as rivulets. The location of the transition from the smooth to the rough zone was found to migrate towards the stagnation point with time. Comparative tests were conducted to study the effect of the substrate thermal and roughness properties on ice accretion. The importance of surface water behavior was evaluated by the addition of a surface tension reducing agent to the icing tunnel water supply, which significantly altered the accreted glaze ice shape. Measurements were made to determine the contact angle behavior of water droplets on ice. A simple multizone modification to current glaze ice accretion models was proposed to include the observed surface roughness behavior

Socio-Economic Evaluation of the Potential for Australian Tree Species in the Philippines

Crop Production/Industries,

Heat current rectification and mobility edges

We investigate how the presence of a single-particle mobility edge in a system can generate strong heat current rectification. Specifically, we study a quadratic bosonic chain subject to a quasi-periodic potential and coupled at its boundaries to spin baths of differing temperature. We find that rectification increases by orders of magnitude depending on the spatial position in the chain of localized eigenstates above the mobility edge. The largest enhancements occur when the coupling of one bath to the system is dominated by a localized eigenstate, while the other bath couples to numerous delocalized eigenstates. By tuning the parameters of the quasi-periodic potential it is thus possible to vary the amplitude, and even invert the direction, of the rectification.Comment: 5+3 pages 4+4 figure

Comparison of 3D scanned human models for off-body communications using motion capture

Body area networks are complex to analyze as there are several channel mechanisms occurring simultaneously, i.e. environmental multipath together with body motion and close coupling between worn antennas and human tissue. Electromagnetic (EM) simulation is an important tool since not all studies can be done on a real human. In order to gain insight into off-body communication involving a worn antenna, this paper uses a 3D animated model obtained from a 3D surface scanner and a motion capture system for full wave simulation of channels at 2.45 and 5.5GHz. To evaluate if the model can represent body area radio channels in general, a comparison of S21 of the simulated model with measurements from 5 other models of similar height to the main test subject is presented

A viscoplastic constitutive theory for metal matrix composites at high temperature

A viscoplastic constitutive theory is presented for representing the high temperature deformation behavior of metal matrix composites. The point of view taken is a continuum one where the composite is considered a material in its own right, with its own properties that can be determined for the composite as a whole. It is assumed that a single preferential (fiber) direction is identifiable at each material point (continuum element) admitting the idealization of local transverse isotropy. A key ingredient is the specification of an experimental program for the complete determination of the material functions and parameters for characterizing a particular metal matrix composite. The parameters relating to the strength of anisotropy can be determined through tension/torsion tests on longitudinally and circumferentially reinforced thin walled tubes. Fundamental aspects of the theory are explored through a geometric interpretation of some basic features analogous to those of the classical theory of plasticity

The death of massive stars - II. Observational constraints on the progenitors of type Ibc supernovae

The progenitors of many type II core-collapse supernovae have now been identified directly on pre-discovery imaging. Here we present an extensive search for the progenitors of type Ibc supernovae in all available pre-discovery imaging since 1998. There are 12 type Ibc supernovae with no detections of progenitors in either deep ground-based or Hubble Space Telescope archival imaging. The deepest absolute BVR magnitude limits are between -4 and -5. We compare these limits with the observed Wolf-Rayet population in the Large Magellanic Cloud and estimate a 16 per cent probability we have failed to detect such a progenitor by chance. Alternatively the progenitors evolve significantly before core-collapse or we have underestimated the extinction towards the progenitors. Reviewing the relative rates and ejecta mass estimates from lightcurve modelling of Ibc SNe, we find both incompatible with Wolf-Rayet stars with initial masses >25Msun being the only progenitors. We present binary evolution models that fit these observational constraints. Stars in binaries with initial masses <20Msun lose their hydrogen envelopes in binary interactions to become low mass helium stars. They retain a low mass hydrogen envelope until approximately 10,000 years before core-collapse; hence it is not surprising that galactic analogues have been difficult to identify.Comment: Accepted by MNRAS. 31 pages, 12 figures, 8 table