Dustiness and deagglomeration testing: interlaboratory comparison of systems for nanoparticle powders

Different types of aerosolization and deagglomeration testing systems exist for studying the properties of nanomaterial powders and their aerosols. However, results are dependent on the specific methods used. In order to have well-characterized aerosols, we require a better understanding of how system parameters and testing conditions influence the properties of the aerosols generated. In the present study, four experimental setups delivering different aerosolization energies were used to test the resultant aerosols of two distinct nanomaterials (hydrophobic and hydrophilic TiO2). The reproducibility of results within each system was good. However, the number concentrations and size distributions of the aerosols created varied across the four systems; for number concentrations, e.g., from 10(3) to 10(6) #/cm(3). Moreover, distinct differences were also observed between the two materials with different surface coatings. The article discusses how system characteristics and other pertinent conditions modify the test results. We propose using air velocity as a suitable proxy for estimating energy input levels in aerosolization systems. The information derived from this work will be especially useful for establishing standard operating procedures for testing nanopowders, as well as for estimating their release rates under different energy input conditions, which is relevant for occupational exposure

Comparison of geometrical layouts for a multi-box aerosol model from a single-chamber dispersion study

Models are increasingly used to estimate and pre-emptively calculate the occupational exposure of airborne released particulate matter. Typical two-box models assume instant and fully mixed air volumes, which can potentially cause issues in cases with fast processes, slow air mixing, and/or large volumes. In this study, we present an aerosol dispersion model and validate it by comparing the modelled concentrations with concentrations measured during chamber experiments. We investigated whether a better estimation of concentrations was possible by using different geometrical layouts rather than a typical two-box layout. A one-box, two-box, and two three-box layouts were used. The one box model was found to underestimate the concentrations close to the source, while overestimating the concentrations in the far field. The two-box model layout performed well based on comparisons from the chamber study in systems with a steady source concentration for both slow and fast mixing. The three-box layout was found to better estimate the concentrations and the timing of the peaks for fluctuating concentrations than the one-box or two-box layouts under relatively slow mixing conditions. This finding suggests that industry-relevant scaled volumes should be tested in practice to gain more knowledge about when to use the two-box or the three-box layout schemes for multi-box models

Realidades interculturales, miradas hacia el género y la educación

Este texto contribuye al análisis científico de varias áreas del conocimiento como la filosofía social, la patología, la educación para el cuidado del medio ambiente y la sustentabilidad que inciden en diversas unidades de aprendizaje de la Licenciatura en Educación para la Salud y de la Maestría en Sociología de la SaludLa presente obra, es la reunión de varias investigaciones que se han dado cita para construir un libro que representa el horizonte de autores y lectores en la pasión del dialogo. Se trata de experiencias de los observadores e interpretes de la realidad de los observadores e interpretes de la realidad social quienes se aventuraron a reunir las voces de los informantes que resguardan los secretos de sus comunidades acerca de su cultura, organización simbólica, y de sus practicas y rituales engarzados en la vida cotidiana

REALIDADES INTERCULTURALES

EL LIBRO FOMENTA LA LÍNEA DE INVESTIGACIÓN DEL CUERPO ACADÉMICO DE GÉNERO, SUSTENTABILIDAD, EDUCACIÓN Y SALUDSE RETOMAN EXPERIENCIAS DE LOS INTERPRETES DE LA REALIDAD SOCIAL QUIENES GUARDAN LOS SECRETOS DE SUS COMUNIDADES ACERCA DE LA CULTURA, ORGANIZACIÓN SIMBÓLICA DE LA VIDA COTIDIANANINGUNO ES PERSONA

The Essential Elements of a Risk Governance Framework for Current and Future Nanotechnologies

Societies worldwide are investing considerable resources into the safe development and use of nanomaterials. Although each of these protective efforts is crucial for governing the risks of nanomaterials, they are insufficient in isolation. What is missing is a more integrative governance approach that goes beyond legislation. Development of this approach must b

Mortality from gastrointestinal congenital anomalies at 264 hospitals in 74 low-income, middle-income, and high-income countries: a multicentre, international, prospective cohort study

Summary Background Congenital anomalies are the fifth leading cause of mortality in children younger than 5 years globally. Many gastrointestinal congenital anomalies are fatal without timely access to neonatal surgical care, but few studies have been done on these conditions in low-income and middle-income countries (LMICs). We compared outcomes of the seven most common gastrointestinal congenital anomalies in low-income, middle-income, and high-income countries globally, and identified factors associated with mortality. Methods We did a multicentre, international prospective cohort study of patients younger than 16 years, presenting to hospital for the first time with oesophageal atresia, congenital diaphragmatic hernia, intestinal atresia, gastroschisis, exomphalos, anorectal malformation, and Hirschsprung’s disease. Recruitment was of consecutive patients for a minimum of 1 month between October, 2018, and April, 2019. We collected data on patient demographics, clinical status, interventions, and outcomes using the REDCap platform. Patients were followed up for 30 days after primary intervention, or 30 days after admission if they did not receive an intervention. The primary outcome was all-cause, in-hospital mortality for all conditions combined and each condition individually, stratified by country income status. We did a complete case analysis. Findings We included 3849 patients with 3975 study conditions (560 with oesophageal atresia, 448 with congenital diaphragmatic hernia, 681 with intestinal atresia, 453 with gastroschisis, 325 with exomphalos, 991 with anorectal malformation, and 517 with Hirschsprung’s disease) from 264 hospitals (89 in high-income countries, 166 in middleincome countries, and nine in low-income countries) in 74 countries. Of the 3849 patients, 2231 (58·0%) were male. Median gestational age at birth was 38 weeks (IQR 36–39) and median bodyweight at presentation was 2·8 kg (2·3–3·3). Mortality among all patients was 37 (39·8%) of 93 in low-income countries, 583 (20·4%) of 2860 in middle-income countries, and 50 (5·6%) of 896 in high-income countries (p<0·0001 between all country income groups). Gastroschisis had the greatest difference in mortality between country income strata (nine [90·0%] of ten in lowincome countries, 97 [31·9%] of 304 in middle-income countries, and two [1·4%] of 139 in high-income countries; p≤0·0001 between all country income groups). Factors significantly associated with higher mortality for all patients combined included country income status (low-income vs high-income countries, risk ratio 2·78 [95% CI 1·88–4·11], p<0·0001; middle-income vs high-income countries, 2·11 [1·59–2·79], p<0·0001), sepsis at presentation (1·20 [1·04–1·40], p=0·016), higher American Society of Anesthesiologists (ASA) score at primary intervention (ASA 4–5 vs ASA 1–2, 1·82 [1·40–2·35], p<0·0001; ASA 3 vs ASA 1–2, 1·58, [1·30–1·92], p<0·0001]), surgical safety checklist not used (1·39 [1·02–1·90], p=0·035), and ventilation or parenteral nutrition unavailable when needed (ventilation 1·96, [1·41–2·71], p=0·0001; parenteral nutrition 1·35, [1·05–1·74], p=0·018). Administration of parenteral nutrition (0·61, [0·47–0·79], p=0·0002) and use of a peripherally inserted central catheter (0·65 [0·50–0·86], p=0·0024) or percutaneous central line (0·69 [0·48–1·00], p=0·049) were associated with lower mortality. Interpretation Unacceptable differences in mortality exist for gastrointestinal congenital anomalies between lowincome, middle-income, and high-income countries. Improving access to quality neonatal surgical care in LMICs will be vital to achieve Sustainable Development Goal 3.2 of ending preventable deaths in neonates and children younger than 5 years by 2030

Indoor air pollution and health.

The number of deaths caused by smoking in the home could be comparable to the numbers of fatalities from road traffic collisions, according to new research led by NUI Galway and funded under the EPA’s STRIVE Research Programme. ‘Indoor Air Pollution and Health’ is a new in-depth study of air pollution in homes and shows that the concentration of particulate pollution in the homes of smokers who smoke indoors is six times higher than the World Health Organisation’s recommendation for general outdoor air quality. This research examined the health impacts of air pollution in homes. It presents new information on levels of indoor air pollutants in homes using solid fuels for heating or cooking and in homes that have a resident smoker. The report highlights the need for public health policy and research professionals to develop interventions to address this. The objective of the Indoor Air Pollution and Health (IAPAH) research project was to quantify the levels of Indoor Air Pollution (IAP) in Irish and Scottish homes where open combustion takes place, and provide an estimate of the potential health burden due to exposure to combustion derived air pollution in the home. IAP concentrations were measured in 100 homes in Ireland and Scotland

Integrated exposure for risk assessment in indoor environments based on a review of concentration data on airborne chemical pollutants in domestic environments in Europe

This review set out to identify data sets for airborne chemical pollutants measured in domestic dwellings within European Union (EU) countries from the literature published during 1995-2010. A total of 74 papers satisfied inclusion criteria, and from those papers data on country location, population sampled, sampling period, number of samples and summary statistics of concentrations measured were gathered. The chemical substances identified and included were grouped to aldehydes, radon, carbon dioxide (CO2), carbon monoxide (CO), nicotine, nitrogen dioxide (NO2), polycyclic aromatic hydrocarbons, volatile organic compounds and brominated flame retardants. The review showed that the availability of data between the EU countries is varying and more measured data are available for countries in northern Europe than in the southern parts. This review is part of the Integrated Exposure for Risk Assessment in Indoor Environments project which developed a full-chain modelling platform, incorporating tools and databases for indoor chemical source release, exposure and risk assessment with the ultimate aim of estimating the health impact of chemical exposures in the indoor environment. &copy; International Society of the Built Environment

Airborne engineered nanomaterials in the workplace: a review of release and worker exposure during nanomaterial production and handling processes

For exposure and risk assessment in occupational settings involving engineered nanomaterials (ENMs), it is important to understand the mechanisms of release and how they are influenced by the ENM, the matrix material, and process characteristics. This review summarizes studies providing ENM release information in occupational settings, during different industrial activities and using various nanomaterials. It also assesses the contextual information - such as the amounts of materials handled, protective measures, and measurement strategies - to understand which release scenarios can result in exposure. High-energy processes such as synthesis, spraying, and machining were associated with the release of large numbers of predominantly small-sized particles. Low-energy processes, including laboratory handling, cleaning, and industrial bagging activities, usually resulted in slight or moderate releases of relatively large agglomerates. The present analysis suggests that process-based release potential can be ranked, thus helping to prioritize release assessments, which is useful for tiered exposure assessment approaches and for guiding the implementation of workplace safety strategies. The contextual information provided in the literature was often insufficient to directly link release to exposure. The studies that did allow an analysis suggested that significant worker exposure might mainly occur when engineering safeguards and personal protection strategies were not carried out as recommended