5,994 research outputs found

    Spectroscopic analysis of epoxidised jatropha oil (EJO) and acrylated epoxidised jatropha oil (AEJO)

    Get PDF
    The non-edible seed oil of the Jatropha plant is a renewable and sustainable material to produce vegetable oil-based epoxy and epoxy acrylate as raw polymeric material. The objective of this study is to synthesis Jatropha seed oil-based epoxy and acrylate epoxy resins through conventional methods. An epoxy ring of Epoxidised Jatropha Oil (EJO) was formed through an in-situ epoxidation process using hydrogen peroxide and formic acid as an oxygen donor and oxygen carrier respectively. Acrylated Epoxidised Jatropha Oil (AEJO) was produced by reacting EJO with acrylic acid with the existence of triethylamine and 4-methoxyphenol as a catalyst and inhibitor respectively. The measured oxirane-oxygen content (OOC) of EJO was 4.99%. The acid value of the AEJO was determined at 4.42 mg KOH/g. Both the EJO and AEJO were characterised by FTIR and 1H NMR spectroscopies

    Epidemiology of multimorbidity in China and implications for the healthcare system: cross-sectional survey among 162,464 community household residents in southern China

    Get PDF
    <b>Background</b> China, like other countries, is facing a growing burden of chronic disease but the prevalence of multimorbidity and implications for the healthcare system have been little researched. We examined the epidemiology of multimorbidity in southern China in a large representative sample. The effects of multimorbidity and other factors on usual source of healthcare were also examined. <p></p> <b>Methods</b> We conducted a large cross-sectional survey among approximately 5% (N = 162,464) of the resident population in three prefectures in Guangdong province, southern China in 2011. A multistage, stratified random sampling was adopted. The study population had many similar characteristics to the national census population. Interviewer-administered questionnaires were used to collect self-report data on demographics, socio-economics, lifestyles, healthcare use, and health characteristics from paper-based medical reports. <p></p> <b>Results</b> More than one in ten of the total study population (11.1%, 95% confidence interval (CI) 10.6 to 11.6) had two or more chronic conditions from a selection of 40 morbidities. The prevalence of multimorbidity increased with age (adjusted odds ratio (aOR) = 1.36, 95% CI 1.35 to 1.38 per five years). Female gender (aOR = 1.70, 95% CI 1.64 to 1.76), low education (aOR = 1.26, 95% CI 1.23 to 1.29), lack of medical insurance (aOR = 1.79, 95% CI 1.71 to 1.89), and unhealthy lifestyle behaviours were independent predictors of multimorbidity. Multimorbidity was associated with the regular use of secondary outpatient care in preference to primary care. <p></p> <b>Conclusions</b> Multimorbidity is now common in China. The reported preferential use of secondary care over primary care by patients with multimorbidity has many major implications. There is an urgent need to further develop a strong and equitable primary care system

    QoS multicast tree construction in IP/DWDM optical internet by bio-inspired algorithms

    Get PDF
    Copyright @ Elsevier Ltd. All rights reserved.In this paper, two bio-inspired Quality of Service (QoS) multicast algorithms are proposed in IP over dense wavelength division multiplexing (DWDM) optical Internet. Given a QoS multicast request and the delay interval required by the application, both algorithms are able to find a flexible QoS-based cost suboptimal routing tree. They first construct the multicast trees based on ant colony optimization and artificial immune algorithm, respectively. Then a dedicated wavelength assignment algorithm is proposed to assign wavelengths to the trees aiming to minimize the delay of the wavelength conversion. In both algorithms, multicast routing and wavelength assignment are integrated into a single process. Therefore, they can find the multicast trees on which the least wavelength conversion delay is achieved. Load balance is also considered in both algorithms. Simulation results show that these two bio-inspired algorithms can construct high performance QoS routing trees for multicast applications in IP/DWDM optical Internet.This work was supported in part ny the Program for New Century Excellent Talents in University, the Engineering and Physical Sciences Research Council (EPSRC) of UK under Grant EP/E060722/1, the National Natural Science Foundation of China under Grant no. 60673159 and 70671020, the National High-Tech Reasearch and Development Plan of China under Grant no. 2007AA041201, and the Specialized Research Fund for the Doctoral Program of Higher Education under Grant no. 20070145017

    Improvement of anticorrosion coating properties in bio-based polymer epoxy acrylate incorporated with nano zinc oxide particles

    Get PDF
    A new green binder of Jatropha-oil based epoxy acrylate (AEJO) resin was able to replace coatings in non-ecology-friendly technologies. The epoxy acrylate coating was blended with nano zinc oxide to make hybrid nanocomposites as a corrosion protection coating applied to a mild steel panel. AEJO was synthesized and incorporated with different loadings (1, 3, 5, 7, and 9 wt %) of zinc oxide (ZnO) fillers. The AEJO/ZnO coating was applied on the mild steel substrates and characterized for corrosion protection performance by impedance spectroscopy (EIS) and salt spray tests. XRD analysis was conducted, and thermal properties by TGA were studied. The surface morphology of the hybrid coating was characterized by field emission scanning electron microscopy (FE-SEM). Incorporation of a 5 wt % ZnO loading showed significantly enhanced corrosion resistance through EIS as well as coating performance. This study provides green-based materials and protection to surface and interface engineering

    A mobile health app for the collection of functional outcomes after inpatient stroke rehabilitation: Pilot randomized controlled trial

    Get PDF
    BACKGROUND: Monitoring the functional status of poststroke patients after they transition home is significant for rehabilitation. Mobile health (mHealth) technologies may provide an opportunity to reach and follow patients post discharge. However, the feasibility and validity of functional assessments administered by mHealth technologies are unknown. OBJECTIVE: This study aimed to evaluate the feasibility, validity, and reliability of functional assessments administered through the videoconference function of a mobile phone-based app compared with administration through the telephone function in poststroke patients after rehabilitation hospitalization. METHODS: A randomized controlled trial was conducted in a rehabilitation hospital in Southeast China. Participants were randomly assigned to either a videoconference follow-up (n=60) or a telephone follow-up (n=60) group. We measured the functional status of participants in each group at 2-week and 3-month follow-up periods. Half the participants in each group were followed by face-to-face home visit assessments as the gold standard. Validity was assessed by comparing any score differences between videoconference follow-up and home visit assessments, as well as telephone follow-up and home visit assessments. Reliability was assessed by computing agreements between videoconference follow-up and home visit assessments, as well as telephone follow-up and home visit assessments. Feasibility was evaluated by the levels of completion, satisfaction, comfort, and confidence in the 2 groups. RESULTS: Scores obtained from the videoconference follow-up were similar to those of the home visit assessment. However, most scores collected from telephone administration were higher than those of the home visit assessment. The agreement between videoconference follow-up and home visit assessments was higher than that between telephone follow-up and home visit assessments at all follow-up periods. In the telephone follow-up group, completion rates were 95% and 82% at 2-week and 3-month follow-up points, respectively. In the videoconference follow-up group, completion rates were 95% and 80% at 2-week and 3-month follow-up points, respectively. There were no differences in the completion rates between the 2 groups at all follow-up periods (X CONCLUSIONS: The videoconference follow-up assessment of functional status demonstrates higher validity and reliability, as well as higher confidence and satisfaction perceived by patients, than the telephone assessment. The videoconference assessment provides an efficient means of assessing functional outcomes of patients after hospital discharge. This method provides a novel solution for clinical trials requiring longitudinal assessments. TRIAL REGISTRATION: chictr.org.cn: ChiCTR1900027626; http://www.chictr.org.cn/edit.aspx?pid=44831&htm=4

    GPU-based ultra-fast direct aperture optimization for online adaptive radiation therapy

    Full text link
    Online adaptive radiation therapy (ART) has great promise to significantly reduce normal tissue toxicity and/or improve tumor control through real-time treatment adaptations based on the current patient anatomy. However, the major technical obstacle for clinical realization of online ART, namely the inability to achieve real-time efficiency in treatment re-planning, has yet to be solved. To overcome this challenge, this paper presents our work on the implementation of an intensity modulated radiation therapy (IMRT) direct aperture optimization (DAO) algorithm on graphics processing unit (GPU) based on our previous work on CPU. We formulate the DAO problem as a large-scale convex programming problem, and use an exact method called column generation approach to deal with its extremely large dimensionality on GPU. Five 9-field prostate and five 5-field head-and-neck IMRT clinical cases with 5\times5 mm2 beamlet size and 2.5\times2.5\times2.5 mm3 voxel size were used to evaluate our algorithm on GPU. It takes only 0.7~2.5 seconds for our implementation to generate optimal treatment plans using 50 MLC apertures on an NVIDIA Tesla C1060 GPU card. Our work has therefore solved a major problem in developing ultra-fast (re-)planning technologies for online ART
    corecore