42 research outputs found
Chemically Exfoliated Graphene Nanosheets for Flexible Electrode Applications
Graphene oxide (GO), produced by oxidation of graphite powder and exfoliation, is intensively utilized in electrodes, templates for hybrid materials, interfacial modifiers, three-dimensional structures, and so on, with its performance as an electrode material being determined by its chemical and structural states. This chapter describes the fabrication method of GO nanosheets from graphite oxide powder and their stable dispersion after reduction and applications in devices. Rheologically driven exfoliation and unusual acoustic cavitation methods were applied to produce large and less defective GO nanosheets. As a dispersion strategy of reduced GO (RGO) in solution, TiO2 precursor, cation-π interaction, silanol groups were introduced. Moreover, supramolecular chemistry, for example, quadruple hydrogen bonding moieties, was applied to solve the dispersion of highly concentrated RGO pastes. As potential applications of GO and RGO, we described GO as a p-type dopant and interfacial modifier as well as energy storage electrodes, IR sensors, and emitters. The judicious use of chemically exfoliated graphene can open new applications as a flexible electrode
Development of Transmission Line Employing Graphene-Silver Nanowire/PET Structure for Application in Flexible and Wearable Devices in X-Band Wireless Communication Systems
In this study, we fabricated a coplanar waveguide using a novel graphene-silver nanowire composite structure (GNCS) on a polyethylene terephthalate (PET) substrate and then investigated its radio frequency (RF) characteristics. According to the measured results, the coplanar waveguide employing GNCS exhibited a substantially lower loss of transmission line than conventional waveguides. Furthermore, compared to the conventional graphene-based coplanar waveguide, the proposed structure allowed for lower skin depth and higher conductivity, resulting from the high electric conductivity of the silver nanowire. In addition, repetitive bending tests, which were performed to investigate the electric stability of the graphene-silver nanowire, showed that the coplanar waveguide employing GNCS offered substantially better electrical stability than the conventional graphene-based coplanar waveguide. These results indicate that the graphene-silver nanowire structure is a promising candidate for application in flexible wireless communication systems. Notably, this is also the first study to investigate the RF performance and electrical stability of a graphene-silver nanowire/PET structure
Autophagic flux induced by graphene oxide has a neuroprotective effect against human prion protein fragments
Retroperitoneal Giant Liposarcoma
Retroperitoneal liposarcoma is an infrequent, locally aggressive malignancy. We report two cases of huge retroperitoneal liposarcomas. The presence of a palpable abdominal mass was a common symptom of the two patients. Preoperative imaging study showed huge retroperitoneal tumors. Both patients underwent complete surgical resections, and a negative microscopic margin was achieved in both cases. The histopathologic diagnosis was a well-differentiated retroperitoneal liposarcoma. Neither of the two patients developed a recurring tumor during the 1.5 years of follow-up
d-(+)-Galactose-Conjugated Single-Walled Carbon Nanotubes as New Chemical Probes for Electrochemical Biosensors for the Cancer Marker Galectin-3
d-(+)-Galactose-conjugated single-walled carbon nanotubes (SWCNTs) were synthesized for use as biosensors to detect the cancer marker galectin-3. To investigate the binding of galectin-3 to the d-(+)-galactose-conjugated SWCNTs, an electrochemical biosensor was fabricated by using molybdenum electrodes. The binding affinities of the conjugated SWCNTs to galectin-3 were quantified using electrochemical sensitivity measurements based on the differences in resistance together with typical I-V characterization. The electrochemical sensitivity measurements of the d-(+)-galactose-conjugated SWCNTs differed significantly between the samples with and without galectin-3. This indicates that d-(+)-galactose-conjugated SWCNTs are potentially useful electrochemical biosensors for the detection of cancer marker galectin-3
Chemically doped three-dimensional porous graphene monoliths for high-performance flexible filed emitters
Despite the recent progress in the fabrication of field emitters based on graphene nanosheets, their morphological
and electrical properties, which affect their degree of field enhancement as well as the electron
tunnelling barrier height, should be controlled to allow for better field-emission properties. Here we
report a method that allows the synthesis of graphene-based emitters with a high field-enhancement
factor and a low work function. The method involves forming monolithic three-dimensional (3D) graphene
structures by freeze-drying of a highly concentrated graphene paste and subsequent work-function
engineering by chemical doping. Graphene structures with vertically aligned edges were successfully
fabricated by the freeze-drying process. Furthermore, their number density could be controlled by
varying the composition of the graphene paste. Al- and Au-doped 3D graphene emitters were fabricated
by introducing the corresponding dopant solutions into the graphene sheets. The resulting field-emission
characteristics of the resulting emitters are discussed. The synthesized 3D graphene emitters were highly
flexible, maintaining their field-emission properties even when bent at large angles. This is attributed to
the high crystallinity and emitter density and good chemical stability of the 3D graphene emitters, as well
as to the strong interactions between the 3D graphene emitters and the substrate.1851sciescopu
One-Step Transfer and Integration of Multifunctionality in CVD Graphene by TiO2/Graphene Oxide Hybrid Layer
We present a straightforward method for simultaneously enhancing the electrical conductivity, environmental stability, and photocatalytic properties of graphene films through one-step transfer of CVD graphene and integration by introducing TiO2/graphene oxide layer. A highly durable and flexible TiO2 layer is successfully used as a supporting layer for graphene transfer instead of the commonly used PMMA. Transferred graphene/TiO2 film is directly used for measuring the carrier transport and optoelectronic properties without an extra TiO2 removal and following deposition steps for multifunctional integration into devices because the thin TiO2 layer is optically transparent and electrically semiconducting. Moreover, the TiO2 layer induces charge screening by electrostatically interacting with the residual oxygen moieties on graphene, which are charge scattering centers, resulting in a reduced current hysteresis. Adsorption of water and other chemical molecules onto the graphene surface is also prevented by the passivating TiO2 layer, resulting in the long term environmental stability of the graphene under high temperature and humidity. In addition, the graphene/TiO2 film shows effectively enhanced photocatalytic properties because of the increase in the transport efficiency of the photogenerated electrons due to the decrease in the injection barrier formed at the interface between the F-doped tin oxide and TiO2 layers.111121sciescopu