The Light and Period Variations of the Eclipsing Binary BX Draconis

New CCD photometric observations of BX Dra were obtained for 26 nights from 2009 April to 2010 June. The long-term photometric behaviors of the system are presented from detailed studies of the period and light variations, based on the historical data and our new observations. All available light curves display total eclipses at secondary minima and inverse O'Connell effects with Max I fainter than Max II, which are satisfactorily modeled by adding the slightly time-varying hot spot on the primary star. A total of 87 times of minimum light spanning over about 74 yrs, including our 22 timing measurements, were used for ephemeris computations. Detailed analysis of the O-C diagram showed that the orbital period has changed in combinations with an upward parabola and a sinusoidal variation. The continuous period increase with a rate of +5.65 \times 10^-7 d yr^-1 is consistent with that calculated from the Wilson-Devinney synthesis code. It can be interpreted as a mass transfer from the secondary to the primary star at a rate of 2.74 \times 10^-7 M\odot yr^-1, which is one of the largest rates for contact systems. The most likely explanation of the sinusoidal variation with a period of 30.2 yrs and a semi-amplitude of 0.0062 d is a light-traveltime effect due to the existence of a circumbinary object. We suggest that BX Dra is probably a triple system, consisting of a primary star with a spectral type of F0, its secondary component of spectral type F1-2, and an unseen circumbinary object with a minimum mass of M3 = 0.23 M\odot.Comment: 24 pages, including 5 figures and 9 tables, accepted for publication in PAS

Comparison of volume-controlled and pressure-controlled ventilation using a laryngeal mask airway during gynecological laparoscopy

Background: Several publications have reported the successful, safe use of Laryngeal Mask Airway (LMA)-Classic devices in patients undergoing laparoscopic surgery. However, there have been no studies that have examined the application of volume-controlled ventilation (VCV) or pressure-controlled ventilation (PCV) using a LMA during gynecological laparoscopy. The aim of this study is to compare how the VCV and PCV modes and using a LMA affect the pulmonary mechanics, the gas exchange and the cardiovascular responses in patients who are undergoing gynecological laparoscopy. Methods: Sixty female patients were randomly allocated to one of two groups, (the VCV or PCV groups). In the VCV group, baseline ventilation of the lung was performed with volume-controlled ventilation and a tidal volume of 10 ml/kg ideal body weight (IBW). In the PCV group, baseline ventilation of the lung using pressure-controlled ventilation was initiated with a peak airway pressure that provided a tidal volume of 10 ml/kg IBW and an upper limit of 35 cmH2O. The end-tidal CO2, the peak airway pressures (Ppeak), the compliance, the airway resistance and the arterial oxygen saturation were recorded at T1: 5 minutes after insertion of the laryngeal airway, and at T2 and T3: 5 and 15 minutes, respectively, after CO2 insufflation. Results: The Ppeak at 5 minutes and 15 minutes after CO2 insufflation were significantly increased compared to the baseline values in both groups. Also, at 5 minutes and 15 minutes after CO2 insufflation, there were significant differences of the Ppeak between the two groups. The compliance decreased in both groups after creating the pneumopertoneim (P < 0.05). Conclusions: Our results demonstrate that PCV may be an effective method of ventilation during gynecological laparoscopy, and it ensures oxygenation while minimizing the increases of the peak airway pressure after CO2 insufflation. ��� the Korean Society of Anesthesiologists, 2011

A simple iterative independent component analysis algorithm for vibration source signal identification of complex structures

ABSTRACT:Independent Component Analysis (ICA), one of the blind source separation methods, can be applied for extracting unknown source signals only from received signals. This is accomplished by finding statistical independence of signal mixtures and has been successfully applied to myriad fields such as medical science, image processing, and numerous others. Nevertheless, there are inherent problems that have been reported when using this technique: insta- bility and invalid ordering of separated signals, particularly when using a conventional ICA technique in vibratory source signal identification of complex structures. In this study, a simple iterative algorithm of the conventional ICA has been proposed to mitigate these problems. The proposed method to extract more stable source signals having valid order includes an iterative and reordering process of extracted mixing matrix to reconstruct finally converged source signals, referring to the magnitudes of correlation coefficients between the intermediately separated signals and the signals measured on or nearby sources. In order to review the problems of the conventional ICA technique and to vali- date the proposed method, numerical analyses have been carried out for a virtual response model and a 30m class submarine model. Moreover, in order to investigate applicability of the proposed method to real problem of complex structure, an experiment has been carried out for a scaled submarine mockup. The results show that the proposed method could resolve the inherent problems of a conventional ICA technique

High-efficiency tooth bleaching using non-thermal atmospheric pressure plasma with low concentration of hydrogen peroxide

Light-activated tooth bleaching with a high hydrogen peroxide (HP; H2O2) concentration has risks and the actual role of the light source is doubtful. The use of conventional light might result in an increase in the temperature and cause thermal damage to the health of the tooth tissue. Objective This study investigated the efficacy of tooth bleaching using non-thermal atmospheric pressure plasma (NAPP) with 15% carbamide peroxide (CP; CH6N2O3) including 5.4% HP, as compared with conventional light sources. Material and Methods Forty human teeth were randomly divided into four groups: Group I (CP+NAPP), Group II (CP+plasma arc lamp; PAC), Group III (CP+diode laser), and Group IV (CP alone). Color changes (∆E) of the tooth and tooth surface temperatures were measured. Data were evaluated by one-way analysis of variance (ANOVA) and post-hoc Tukey's tests. Results Group I showed the highest bleaching efficacy, with a ∆E value of 1.92-, 2.61 and 2.97-fold greater than those of Groups II, III and IV, respectively (

Gypsum-Dependent Effect of NaCl on Strength Enhancement of CaO-Activated Slag Binders

This study explores the combined effect of NaCl and gypsum on the strength of the CaO-activated ground-granulated blast furnace slag (GGBFS) binder system. In the CaO-activated GGBFS system, the incorporation of NaCl without gypsum did not improve the strength of the system. However, with the presence of gypsum, the use of NaCl yielded significantly greater strength than the use of either gypsum or NaCl alone. The presence of NaCl largely increases the solubility of gypsum in a solution, leading to a higher concentration of sulfate ions, which is essential for generating more and faster formations of ettringite in a fresh mixture of paste. The significant strength enhancement of gypsum was likely due to the accelerated and increased formation of ettringite, accompanied by more efficient filling of pores in the system

Intraoperative mild hyperoxia may be associated with improved survival after off-pump coronary artery bypass grafting: a retrospective observational study

Background : The effect of hyperoxia due to supplemental oxygen administration on postoperative outcomes in patients undergoing cardiac surgery remains unclear. This retrospective study aimed to evaluate the relationship between intraoperative oxygen tension and mortality after off-pump coronary artery bypass grafting (OPCAB). Methods : The study included adult patients who underwent isolated OPCAB between July 2010 and June 2020. Patients were categorised into three groups based on their intraoperative time-weighted average arterial oxygen partial pressure (PaO2): normoxia/near-normoxia ( 250 mmHg). The risk of in-hospital mortality was compared using weighted logistic regression analysis. Restricted cubic spline analysis was performed to analyse intraoperative PaO2 as a continuous variable. The risk of cumulative all-cause mortality was compared using Cox regression analysis. Results : The normoxia/near-normoxia, mild hyperoxia, and severe hyperoxia groups included 229, 991, and 173 patients (n = 1393), respectively. The mild hyperoxia group had a significantly lower risk of in-hospital mortality than the normoxia/near-normoxia (odds ratio [OR], 0.12; 95% confidence interval [CI], 0.06–0.22) and severe hyperoxia groups (OR, 0.06; 95% CI, 0.03–0.14). Intraoperative PaO2 exhibited a U-shaped relationship with in-hospital mortality in the non-hypoxic range. The risk of cumulative all-cause mortality was significantly lower in the mild hyperoxia group (hazard ratio, 0.72; 95% CI, 0.52–0.99) than in the normoxia/near-normoxia group. Conclusions : Maintaining intraoperative PaO2 at 150–250 mmHg was associated with a lower risk of mortality after OPCAB than PaO2 at 250 mmHg. Future randomised trials are required to confirm if mildly increasing arterial oxygen tension during OPCAB to 150–250 mmHg improves postoperative outcomes

Effects of a Herbal Medicine, Yukgunja-Tang, on Functional Dyspepsia Patients Classified by 3-Dimensional Facial Measurement: A Study Protocol for Placebo-Controlled, Double-Blind, Randomized Trial

Introduction. Functional dyspepsia (FD), a common upper gastrointestinal disease, is difficult to manage because of the limitations of current conventional treatments. Yukgunja-tang (YGJT) is widely used to treat FD in clinical practice in Korea, Japan, and China. However, YGJT significantly improves few symptoms of FD. In Korean medicine, FD is a well-known functional gastric disease that shows difference in the effect of herbal medicine depending on constitution or type of Korean medicine diagnosis. This study aims to investigate the efficacy of YGJT on FD patients classified by 3-dimensional facial measurement using a 3-dimensional facial shape diagnostic system (3-FSDS). Methods. A placebo-controlled, double-blind, randomized, two-center trial will be performed to evaluate the efficacy of YGJT on FD patients. Eligible subjects will be initially classified as two types by 3-dimensional facial measurement using the 3-FSDS. Ninety-six subjects (48 subjects per each type) will be enrolled. These subjects will be randomly allocated into treatment or control groups in a 2 : 1 ratio. YGJT or placebo will be administered to each group during the 8-week treatment period. The primary outcome is total dyspepsia symptom scale, and the secondary outcomes include single dyspepsia symptom scale, proportion of responders with adequate symptom relief, visual analog scale, Nepean dyspepsia index-Korean version, functional dyspepsia-related quality of life, and spleen qi deficiency questionnaire. Discussion. This is the first randomized controlled trial to assess the efficacy of the YGJT on FD patients classified by 3-dimensional facial measurement. We will compare the treatment effect of the YGJT on FD patients classified as two types using the 3-FSDS. The results of this trial will help the FD patients improve the symptoms and quality of life effectively and provide objective evidence for prescribing the YGJT to FD patients in clinical practice. Trial Registration. This trial is registered with Clinical Research Information Service Identifier: KCT0001920, 15 May, 2016